drivers/mmc/zynq_sdhci.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2013 - 2015 Xilinx, Inc.
  *
  * Xilinx Zynq SD Host Controller Interface
  */

 #include <clk.h>
 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <linux/delay.h>
 #include "mmc_private.h"
 #include <log.h>
 #include <dm/device_compat.h>
 #include <linux/err.h>
 #include <linux/libfdt.h>
 #include <malloc.h>
 #include <sdhci.h>
 #include <zynqmp_tap_delay.h>

 #define SDHCI_ARASAN_ITAPDLY_REGISTER   0xF0F8
 #define SDHCI_ARASAN_OTAPDLY_REGISTER   0xF0FC
 #define SDHCI_ITAPDLY_CHGWIN            0x200
 #define SDHCI_ITAPDLY_ENABLE            0x100
 #define SDHCI_OTAPDLY_ENABLE            0x40

 #define SDHCI_TUNING_LOOP_COUNT		40
 #define MMC_BANK2			0x2

 struct arasan_sdhci_clk_data {
 	int clk_phase_in[MMC_TIMING_MMC_HS400 + 1];
 	int clk_phase_out[MMC_TIMING_MMC_HS400 + 1];
 };

 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
 };

 struct arasan_sdhci_priv {
 	struct sdhci_host *host;
 	struct arasan_sdhci_clk_data clk_data;
 	u8 deviceid;
 	u8 bank;
 	u8 no_1p8;
 };

 #if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
 /* Default settings for ZynqMP Clock Phases */
 const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63,  0,   0, 183, 54,  0, 0};
 const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0};

 /* Default settings for Versal Clock Phases */
 const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0};
 const u32 versal_oclk_phases[] = {0,  60, 48, 0, 48, 72, 90, 36, 60, 90, 0};

 static const u8 mode2timing[] = {
 	[MMC_LEGACY] = MMC_TIMING_LEGACY,
 	[MMC_HS] = MMC_TIMING_MMC_HS,
 	[SD_HS] = MMC_TIMING_SD_HS,
 	[MMC_HS_52] = MMC_TIMING_UHS_SDR50,
 	[MMC_DDR_52] = MMC_TIMING_UHS_DDR50,
 	[UHS_SDR12] = MMC_TIMING_UHS_SDR12,
 	[UHS_SDR25] = MMC_TIMING_UHS_SDR25,
 	[UHS_SDR50] = MMC_TIMING_UHS_SDR50,
 	[UHS_DDR50] = MMC_TIMING_UHS_DDR50,
 	[UHS_SDR104] = MMC_TIMING_UHS_SDR104,
 	[MMC_HS_200] = MMC_TIMING_MMC_HS200,
 };

 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
 {
 	u16 clk;
 	unsigned long timeout;

 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 	clk &= ~(SDHCI_CLOCK_CARD_EN);
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

 	/* Issue DLL Reset */
 	zynqmp_dll_reset(deviceid);

 	/* Wait max 20 ms */
 	timeout = 100;
 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 				& SDHCI_CLOCK_INT_STABLE)) {
 		if (timeout == 0) {
 			dev_err(mmc_dev(host->mmc),
 				": Internal clock never stabilised.\n");
 			return;
 		}
 		timeout--;
 		udelay(1000);
 	}

 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }

 static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
 {
 	struct mmc_cmd cmd;
 	struct mmc_data data;
 	u32 ctrl;
 	struct sdhci_host *host;
 	struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
 	char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
 	u8 deviceid;

 	debug("%s\n", __func__);

 	host = priv->host;
 	deviceid = priv->deviceid;

 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 	ctrl |= SDHCI_CTRL_EXEC_TUNING;
 	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);

 	mdelay(1);

 	arasan_zynqmp_dll_reset(host, deviceid);

 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
 	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);

 	do {
 		cmd.cmdidx = opcode;
 		cmd.resp_type = MMC_RSP_R1;
 		cmd.cmdarg = 0;

 		data.blocksize = 64;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;

 		if (tuning_loop_counter-- == 0)
 			break;

 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
 		    mmc->bus_width == 8)
 			data.blocksize = 128;

 		sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
 						    data.blocksize),
 			     SDHCI_BLOCK_SIZE);
 		sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
 		sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);

 		mmc_send_cmd(mmc, &cmd, NULL);
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);

 		if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
 			udelay(1);

 	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);

 	if (tuning_loop_counter < 0) {
 		ctrl &= ~SDHCI_CTRL_TUNED_CLK;
 		sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
 	}

 	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
 		printf("%s:Tuning failed\n", __func__);
 		return -1;
 	}

 	udelay(1);
 	arasan_zynqmp_dll_reset(host, deviceid);

 	/* Enable only interrupts served by the SD controller */
 	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
 		     SDHCI_INT_ENABLE);
 	/* Mask all sdhci interrupt sources */
 	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);

 	return 0;
 }

 /**
  * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
  * Set the SD Output Clock Tap Delays for Output path
  *
  * @host:		Pointer to the sdhci_host structure.
  * @degrees:		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host,
 					    int degrees)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	u8 tap_delay, tap_max = 0;
 	int ret;
 	int timing = mode2timing[mmc->selected_mode];

 	/*
 	 * This is applicable for SDHCI_SPEC_300 and above
 	 * ZynqMP does not set phase for <=25MHz clock.
 	 * If degrees is zero, no need to do anything.
 	 */
 	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
 	    timing == MMC_TIMING_LEGACY ||
 	    timing == MMC_TIMING_UHS_SDR12 || !degrees)
 		return 0;

 	switch (timing) {
 	case MMC_TIMING_MMC_HS:
 	case MMC_TIMING_SD_HS:
 	case MMC_TIMING_UHS_SDR25:
 	case MMC_TIMING_UHS_DDR50:
 	case MMC_TIMING_MMC_DDR52:
 		/* For 50MHz clock, 30 Taps are available */
 		tap_max = 30;
 		break;
 	case MMC_TIMING_UHS_SDR50:
 		/* For 100MHz clock, 15 Taps are available */
 		tap_max = 15;
 		break;
 	case MMC_TIMING_UHS_SDR104:
 	case MMC_TIMING_MMC_HS200:
 		/* For 200MHz clock, 8 Taps are available */
 		tap_max = 8;
 	default:
 		break;
 	}

 	tap_delay = (degrees * tap_max) / 360;

 	arasan_zynqmp_set_tapdelay(priv->deviceid, 0, tap_delay);

 	return ret;
 }

 /**
  * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
  * Set the SD Input Clock Tap Delays for Input path
  *
  * @host:		Pointer to the sdhci_host structure.
  * @degrees:		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
 					    int degrees)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	u8 tap_delay, tap_max = 0;
 	int ret;
 	int timing = mode2timing[mmc->selected_mode];

 	/*
 	 * This is applicable for SDHCI_SPEC_300 and above
 	 * ZynqMP does not set phase for <=25MHz clock.
 	 * If degrees is zero, no need to do anything.
 	 */
 	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
 	    timing == MMC_TIMING_LEGACY ||
 	    timing == MMC_TIMING_UHS_SDR12 || !degrees)
 		return 0;

 	switch (timing) {
 	case MMC_TIMING_MMC_HS:
 	case MMC_TIMING_SD_HS:
 	case MMC_TIMING_UHS_SDR25:
 	case MMC_TIMING_UHS_DDR50:
 	case MMC_TIMING_MMC_DDR52:
 		/* For 50MHz clock, 120 Taps are available */
 		tap_max = 120;
 		break;
 	case MMC_TIMING_UHS_SDR50:
 		/* For 100MHz clock, 60 Taps are available */
 		tap_max = 60;
 		break;
 	case MMC_TIMING_UHS_SDR104:
 	case MMC_TIMING_MMC_HS200:
 		/* For 200MHz clock, 30 Taps are available */
 		tap_max = 30;
 	default:
 		break;
 	}

 	tap_delay = (degrees * tap_max) / 360;

 	arasan_zynqmp_set_tapdelay(priv->deviceid, tap_delay, 0);

 	return ret;
 }

 /**
  * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
  *
  * Set the SD Output Clock Tap Delays for Output path
  *
  * @host:		Pointer to the sdhci_host structure.
  * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host,
 					    int degrees)
 {
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	u8 tap_delay, tap_max = 0;
 	int ret;
 	int timing = mode2timing[mmc->selected_mode];

 	/*
 	 * This is applicable for SDHCI_SPEC_300 and above
 	 * Versal does not set phase for <=25MHz clock.
 	 * If degrees is zero, no need to do anything.
 	 */
 	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
 	    timing == MMC_TIMING_LEGACY ||
 	    timing == MMC_TIMING_UHS_SDR12 || !degrees)
 		return 0;

 	switch (timing) {
 	case MMC_TIMING_MMC_HS:
 	case MMC_TIMING_SD_HS:
 	case MMC_TIMING_UHS_SDR25:
 	case MMC_TIMING_UHS_DDR50:
 	case MMC_TIMING_MMC_DDR52:
 		/* For 50MHz clock, 30 Taps are available */
 		tap_max = 30;
 		break;
 	case MMC_TIMING_UHS_SDR50:
 		/* For 100MHz clock, 15 Taps are available */
 		tap_max = 15;
 		break;
 	case MMC_TIMING_UHS_SDR104:
 	case MMC_TIMING_MMC_HS200:
 		/* For 200MHz clock, 8 Taps are available */
 		tap_max = 8;
 	default:
 		break;
 	}

 	tap_delay = (degrees * tap_max) / 360;

 	/* Set the Clock Phase */
 	if (tap_delay) {
 		u32 regval;

 		regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
 		regval |= SDHCI_OTAPDLY_ENABLE;
 		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
 		regval |= tap_delay;
 		sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
 	}

 	return ret;
 }

 /**
  * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
  *
  * Set the SD Input Clock Tap Delays for Input path
  *
  * @host:		Pointer to the sdhci_host structure.
  * @degrees		The clock phase shift between 0 - 359.
  * Return: 0 on success and error value on error
  */
 static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
 					    int degrees)
 {
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	u8 tap_delay, tap_max = 0;
 	int ret;
 	int timing = mode2timing[mmc->selected_mode];

 	/*
 	 * This is applicable for SDHCI_SPEC_300 and above
 	 * Versal does not set phase for <=25MHz clock.
 	 * If degrees is zero, no need to do anything.
 	 */
 	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
 	    timing == MMC_TIMING_LEGACY ||
 	    timing == MMC_TIMING_UHS_SDR12 || !degrees)
 		return 0;

 	switch (timing) {
 	case MMC_TIMING_MMC_HS:
 	case MMC_TIMING_SD_HS:
 	case MMC_TIMING_UHS_SDR25:
 	case MMC_TIMING_UHS_DDR50:
 	case MMC_TIMING_MMC_DDR52:
 		/* For 50MHz clock, 120 Taps are available */
 		tap_max = 120;
 		break;
 	case MMC_TIMING_UHS_SDR50:
 		/* For 100MHz clock, 60 Taps are available */
 		tap_max = 60;
 		break;
 	case MMC_TIMING_UHS_SDR104:
 	case MMC_TIMING_MMC_HS200:
 		/* For 200MHz clock, 30 Taps are available */
 		tap_max = 30;
 	default:
 		break;
 	}

 	tap_delay = (degrees * tap_max) / 360;

 	/* Set the Clock Phase */
 	if (tap_delay) {
 		u32 regval;

 		regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
 		regval |= SDHCI_ITAPDLY_CHGWIN;
 		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
 		regval |= SDHCI_ITAPDLY_ENABLE;
 		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
 		regval |= tap_delay;
 		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
 		regval &= ~SDHCI_ITAPDLY_CHGWIN;
 		sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
 	}

 	return ret;
 }

 static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
 	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	struct udevice *dev = mmc->dev;
 	u8 timing = mode2timing[mmc->selected_mode];
 	u32 iclk_phase = clk_data->clk_phase_in[timing];
 	u32 oclk_phase = clk_data->clk_phase_out[timing];

 	dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);

 	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
 	    device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
 		sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
 		sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
 	} else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
 		   device_is_compatible(dev, "xlnx,versal-8.9a")) {
 		sdhci_versal_sampleclk_set_phase(host, iclk_phase);
 		sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
 	}
 }

 static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing,
 				     const char *prop)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
 	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
 	u32 clk_phase[2] = {0};

 	/*
 	 * Read Tap Delay values from DT, if the DT does not contain the
 	 * Tap Values then use the pre-defined values
 	 */
 	if (dev_read_u32_array(dev, prop, &clk_phase[0], 2)) {
 		dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
 			prop, clk_data->clk_phase_in[timing],
 			clk_data->clk_phase_out[timing]);
 		return;
 	}

 	/* The values read are Input and Output Clock Delays in order */
 	clk_data->clk_phase_in[timing] = clk_phase[0];
 	clk_data->clk_phase_out[timing] = clk_phase[1];
 }

 /**
  * arasan_dt_parse_clk_phases - Read Tap Delay values from DT
  *
  * Called at initialization to parse the values of Tap Delays.
  *
  * @dev:                Pointer to our struct udevice.
  */
 static void arasan_dt_parse_clk_phases(struct udevice *dev)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
 	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
 	int i;

 	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
 	    device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
 		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
 			clk_data->clk_phase_in[i] = zynqmp_iclk_phases[i];
 			clk_data->clk_phase_out[i] = zynqmp_oclk_phases[i];
 		}

 		if (priv->bank == MMC_BANK2) {
 			clk_data->clk_phase_out[MMC_TIMING_UHS_SDR104] = 90;
 			clk_data->clk_phase_out[MMC_TIMING_MMC_HS200] = 90;
 		}
 	}

 	if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
 	    device_is_compatible(dev, "xlnx,versal-8.9a")) {
 		for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
 			clk_data->clk_phase_in[i] = versal_iclk_phases[i];
 			clk_data->clk_phase_out[i] = versal_oclk_phases[i];
 		}
 	}

 	arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY,
 				 "clk-phase-legacy");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS,
 				 "clk-phase-mmc-hs");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_SD_HS,
 				 "clk-phase-sd-hs");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR12,
 				 "clk-phase-uhs-sdr12");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR25,
 				 "clk-phase-uhs-sdr25");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR50,
 				 "clk-phase-uhs-sdr50");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR104,
 				 "clk-phase-uhs-sdr104");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_DDR50,
 				 "clk-phase-uhs-ddr50");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_DDR52,
 				 "clk-phase-mmc-ddr52");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS200,
 				 "clk-phase-mmc-hs200");
 	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS400,
 				 "clk-phase-mmc-hs400");
 }

 static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
 {
 	struct mmc *mmc = (struct mmc *)host->mmc;
 	u32 reg;

 	if (!IS_SD(mmc))
 		return;

 	if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
 		reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		reg |= SDHCI_CTRL_VDD_180;
 		sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
 	}

 	if (mmc->selected_mode > SD_HS &&
 	    mmc->selected_mode <= UHS_DDR50)
 		sdhci_set_uhs_timing(host);
 }

 const struct sdhci_ops arasan_ops = {
 	.platform_execute_tuning = &arasan_sdhci_execute_tuning,
 	.set_delay = &arasan_sdhci_set_tapdelay,
 	.set_control_reg = &arasan_sdhci_set_control_reg,
 };
 #endif

 static int arasan_sdhci_probe(struct udevice *dev)
 {
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
 	struct sdhci_host *host;
 	struct clk clk;
 	unsigned long clock;
 	int ret;

 	host = priv->host;

 	ret = clk_get_by_index(dev, 0, &clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get clock\n");
 		return ret;
 	}

 	clock = clk_get_rate(&clk);
 	if (IS_ERR_VALUE(clock)) {
 		dev_err(dev, "failed to get rate\n");
 		return clock;
 	}

 	debug("%s: CLK %ld\n", __func__, clock);

 	ret = clk_enable(&clk);
 	if (ret && ret != -ENOSYS) {
 		dev_err(dev, "failed to enable clock\n");
 		return ret;
 	}

 	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
 		       SDHCI_QUIRK_BROKEN_R1B;

 #ifdef CONFIG_ZYNQ_HISPD_BROKEN
 	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif

 	if (priv->no_1p8)
 		host->quirks |= SDHCI_QUIRK_NO_1_8_V;

 	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;

 	ret = mmc_of_parse(dev, &plat->cfg);
 	if (ret)
 		return ret;

 	host->max_clk = clock;

 	host->mmc = &plat->mmc;
 	host->mmc->dev = dev;
 	host->mmc->priv = host;

 	ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max,
 			      CONFIG_ZYNQ_SDHCI_MIN_FREQ);
 	if (ret)
 		return ret;
 	upriv->mmc = host->mmc;

 	return sdhci_probe(dev);
 }

 static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
 {
 	struct arasan_sdhci_priv *priv = dev_get_priv(dev);

 	priv->host = calloc(1, sizeof(struct sdhci_host));
 	if (!priv->host)
 		return -1;

 	priv->host->name = dev->name;

 #if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
 	priv->host->ops = &arasan_ops;
 	arasan_dt_parse_clk_phases(dev);
 #endif

 	priv->host->ioaddr = (void *)dev_read_addr(dev);
 	if (IS_ERR(priv->host->ioaddr))
 		return PTR_ERR(priv->host->ioaddr);

 	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
 	priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
 	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");

 	return 0;
 }

 static int arasan_sdhci_bind(struct udevice *dev)
 {
 	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);

 	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
 }

 static const struct udevice_id arasan_sdhci_ids[] = {
 	{ .compatible = "arasan,sdhci-8.9a" },
 	{ }
 };

 U_BOOT_DRIVER(arasan_sdhci_drv) = {
 	.name		= "arasan_sdhci",
 	.id		= UCLASS_MMC,
 	.of_match	= arasan_sdhci_ids,
 	.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
 	.ops		= &sdhci_ops,
 	.bind		= arasan_sdhci_bind,
 	.probe		= arasan_sdhci_probe,
 	.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
 	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2013 - 2015 Xilinx, Inc.
	*
	* Xilinx Zynq SD Host Controller Interface
	*/

	#include <clk.h>
	#include <common.h>
	#include <dm.h>
	#include <fdtdec.h>
	#include <linux/delay.h>
	#include "mmc_private.h"
	#include <log.h>
	#include <dm/device_compat.h>
	#include <linux/err.h>
	#include <linux/libfdt.h>
	#include <malloc.h>
	#include <sdhci.h>
	#include <zynqmp_tap_delay.h>

	#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8
	#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC
	#define SDHCI_ITAPDLY_CHGWIN 0x200
	#define SDHCI_ITAPDLY_ENABLE 0x100
	#define SDHCI_OTAPDLY_ENABLE 0x40

	#define SDHCI_TUNING_LOOP_COUNT 40
	#define MMC_BANK2 0x2

	struct arasan_sdhci_clk_data {
	int clk_phase_in[MMC_TIMING_MMC_HS400 + 1];
	int clk_phase_out[MMC_TIMING_MMC_HS400 + 1];
	};

	struct arasan_sdhci_plat {
	struct mmc_config cfg;
	struct mmc mmc;
	};

	struct arasan_sdhci_priv {
	struct sdhci_host *host;
	struct arasan_sdhci_clk_data clk_data;
	u8 deviceid;
	u8 bank;
	u8 no_1p8;
	};

	#if defined(CONFIG_ARCH_ZYNQMP) \|\| defined(CONFIG_ARCH_VERSAL)
	/* Default settings for ZynqMP Clock Phases */
	const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0};
	const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0};

	/* Default settings for Versal Clock Phases */
	const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0};
	const u32 versal_oclk_phases[] = {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0};

	static const u8 mode2timing[] = {
	[MMC_LEGACY] = MMC_TIMING_LEGACY,
	[MMC_HS] = MMC_TIMING_MMC_HS,
	[SD_HS] = MMC_TIMING_SD_HS,
	[MMC_HS_52] = MMC_TIMING_UHS_SDR50,
	[MMC_DDR_52] = MMC_TIMING_UHS_DDR50,
	[UHS_SDR12] = MMC_TIMING_UHS_SDR12,
	[UHS_SDR25] = MMC_TIMING_UHS_SDR25,
	[UHS_SDR50] = MMC_TIMING_UHS_SDR50,
	[UHS_DDR50] = MMC_TIMING_UHS_DDR50,
	[UHS_SDR104] = MMC_TIMING_UHS_SDR104,
	[MMC_HS_200] = MMC_TIMING_MMC_HS200,
	};

	static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
	{
	u16 clk;
	unsigned long timeout;

	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
	clk &= ~(SDHCI_CLOCK_CARD_EN);
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

	/* Issue DLL Reset */
	zynqmp_dll_reset(deviceid);

	/* Wait max 20 ms */
	timeout = 100;
	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
	& SDHCI_CLOCK_INT_STABLE)) {
	if (timeout == 0) {
	dev_err(mmc_dev(host->mmc),
	": Internal clock never stabilised.\n");
	return;
	}
	timeout--;
	udelay(1000);
	}

	clk \|= SDHCI_CLOCK_CARD_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
	}

	static int arasan_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
	{
	struct mmc_cmd cmd;
	struct mmc_data data;
	u32 ctrl;
	struct sdhci_host *host;
	struct arasan_sdhci_priv *priv = dev_get_priv(mmc->dev);
	char tuning_loop_counter = SDHCI_TUNING_LOOP_COUNT;
	u8 deviceid;

	debug("%s\n", __func__);

	host = priv->host;
	deviceid = priv->deviceid;

	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
	ctrl \|= SDHCI_CTRL_EXEC_TUNING;
	sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);

	mdelay(1);

	arasan_zynqmp_dll_reset(host, deviceid);

	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
	sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);

	do {
	cmd.cmdidx = opcode;
	cmd.resp_type = MMC_RSP_R1;
	cmd.cmdarg = 0;

	data.blocksize = 64;
	data.blocks = 1;
	data.flags = MMC_DATA_READ;

	if (tuning_loop_counter-- == 0)
	break;

	if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200 &&
	mmc->bus_width == 8)
	data.blocksize = 128;

	sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
	data.blocksize),
	SDHCI_BLOCK_SIZE);
	sdhci_writew(host, data.blocks, SDHCI_BLOCK_COUNT);
	sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);

	mmc_send_cmd(mmc, &cmd, NULL);
	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);

	if (cmd.cmdidx == MMC_CMD_SEND_TUNING_BLOCK)
	udelay(1);

	} while (ctrl & SDHCI_CTRL_EXEC_TUNING);

	if (tuning_loop_counter < 0) {
	ctrl &= ~SDHCI_CTRL_TUNED_CLK;
	sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL2);
	}

	if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
	printf("%s:Tuning failed\n", __func__);
	return -1;
	}

	udelay(1);
	arasan_zynqmp_dll_reset(host, deviceid);

	/* Enable only interrupts served by the SD controller */
	sdhci_writel(host, SDHCI_INT_DATA_MASK \| SDHCI_INT_CMD_MASK,
	SDHCI_INT_ENABLE);
	/* Mask all sdhci interrupt sources */
	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);

	return 0;
	}

	/**
	* sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
	*
	* Set the SD Output Clock Tap Delays for Output path
	*
	* @host: Pointer to the sdhci_host structure.
	* @degrees: The clock phase shift between 0 - 359.
	* Return: 0 on success and error value on error
	*/
	static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host,
	int degrees)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
	struct mmc mmc = (struct mmc )host->mmc;
	u8 tap_delay, tap_max = 0;
	int ret;
	int timing = mode2timing[mmc->selected_mode];

	/*
	* This is applicable for SDHCI_SPEC_300 and above
	* ZynqMP does not set phase for <=25MHz clock.
	* If degrees is zero, no need to do anything.
	*/
	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 \|\|
	timing == MMC_TIMING_LEGACY \|\|
	timing == MMC_TIMING_UHS_SDR12 \|\| !degrees)
	return 0;

	switch (timing) {
	case MMC_TIMING_MMC_HS:
	case MMC_TIMING_SD_HS:
	case MMC_TIMING_UHS_SDR25:
	case MMC_TIMING_UHS_DDR50:
	case MMC_TIMING_MMC_DDR52:
	/* For 50MHz clock, 30 Taps are available */
	tap_max = 30;
	break;
	case MMC_TIMING_UHS_SDR50:
	/* For 100MHz clock, 15 Taps are available */
	tap_max = 15;
	break;
	case MMC_TIMING_UHS_SDR104:
	case MMC_TIMING_MMC_HS200:
	/* For 200MHz clock, 8 Taps are available */
	tap_max = 8;
	default:
	break;
	}

	tap_delay = (degrees * tap_max) / 360;

	arasan_zynqmp_set_tapdelay(priv->deviceid, 0, tap_delay);

	return ret;
	}

	/**
	* sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
	*
	* Set the SD Input Clock Tap Delays for Input path
	*
	* @host: Pointer to the sdhci_host structure.
	* @degrees: The clock phase shift between 0 - 359.
	* Return: 0 on success and error value on error
	*/
	static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
	int degrees)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
	struct mmc mmc = (struct mmc )host->mmc;
	u8 tap_delay, tap_max = 0;
	int ret;
	int timing = mode2timing[mmc->selected_mode];

	/*
	* This is applicable for SDHCI_SPEC_300 and above
	* ZynqMP does not set phase for <=25MHz clock.
	* If degrees is zero, no need to do anything.
	*/
	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 \|\|
	timing == MMC_TIMING_LEGACY \|\|
	timing == MMC_TIMING_UHS_SDR12 \|\| !degrees)
	return 0;

	switch (timing) {
	case MMC_TIMING_MMC_HS:
	case MMC_TIMING_SD_HS:
	case MMC_TIMING_UHS_SDR25:
	case MMC_TIMING_UHS_DDR50:
	case MMC_TIMING_MMC_DDR52:
	/* For 50MHz clock, 120 Taps are available */
	tap_max = 120;
	break;
	case MMC_TIMING_UHS_SDR50:
	/* For 100MHz clock, 60 Taps are available */
	tap_max = 60;
	break;
	case MMC_TIMING_UHS_SDR104:
	case MMC_TIMING_MMC_HS200:
	/* For 200MHz clock, 30 Taps are available */
	tap_max = 30;
	default:
	break;
	}

	tap_delay = (degrees * tap_max) / 360;

	arasan_zynqmp_set_tapdelay(priv->deviceid, tap_delay, 0);

	return ret;
	}

	/**
	* sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
	*
	* Set the SD Output Clock Tap Delays for Output path
	*
	* @host: Pointer to the sdhci_host structure.
	* @degrees The clock phase shift between 0 - 359.
	* Return: 0 on success and error value on error
	*/
	static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host,
	int degrees)
	{
	struct mmc mmc = (struct mmc )host->mmc;
	u8 tap_delay, tap_max = 0;
	int ret;
	int timing = mode2timing[mmc->selected_mode];

	/*
	* This is applicable for SDHCI_SPEC_300 and above
	* Versal does not set phase for <=25MHz clock.
	* If degrees is zero, no need to do anything.
	*/
	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 \|\|
	timing == MMC_TIMING_LEGACY \|\|
	timing == MMC_TIMING_UHS_SDR12 \|\| !degrees)
	return 0;

	switch (timing) {
	case MMC_TIMING_MMC_HS:
	case MMC_TIMING_SD_HS:
	case MMC_TIMING_UHS_SDR25:
	case MMC_TIMING_UHS_DDR50:
	case MMC_TIMING_MMC_DDR52:
	/* For 50MHz clock, 30 Taps are available */
	tap_max = 30;
	break;
	case MMC_TIMING_UHS_SDR50:
	/* For 100MHz clock, 15 Taps are available */
	tap_max = 15;
	break;
	case MMC_TIMING_UHS_SDR104:
	case MMC_TIMING_MMC_HS200:
	/* For 200MHz clock, 8 Taps are available */
	tap_max = 8;
	default:
	break;
	}

	tap_delay = (degrees * tap_max) / 360;

	/* Set the Clock Phase */
	if (tap_delay) {
	u32 regval;

	regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
	regval \|= SDHCI_OTAPDLY_ENABLE;
	sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
	regval \|= tap_delay;
	sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
	}

	return ret;
	}

	/**
	* sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
	*
	* Set the SD Input Clock Tap Delays for Input path
	*
	* @host: Pointer to the sdhci_host structure.
	* @degrees The clock phase shift between 0 - 359.
	* Return: 0 on success and error value on error
	*/
	static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
	int degrees)
	{
	struct mmc mmc = (struct mmc )host->mmc;
	u8 tap_delay, tap_max = 0;
	int ret;
	int timing = mode2timing[mmc->selected_mode];

	/*
	* This is applicable for SDHCI_SPEC_300 and above
	* Versal does not set phase for <=25MHz clock.
	* If degrees is zero, no need to do anything.
	*/
	if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 \|\|
	timing == MMC_TIMING_LEGACY \|\|
	timing == MMC_TIMING_UHS_SDR12 \|\| !degrees)
	return 0;

	switch (timing) {
	case MMC_TIMING_MMC_HS:
	case MMC_TIMING_SD_HS:
	case MMC_TIMING_UHS_SDR25:
	case MMC_TIMING_UHS_DDR50:
	case MMC_TIMING_MMC_DDR52:
	/* For 50MHz clock, 120 Taps are available */
	tap_max = 120;
	break;
	case MMC_TIMING_UHS_SDR50:
	/* For 100MHz clock, 60 Taps are available */
	tap_max = 60;
	break;
	case MMC_TIMING_UHS_SDR104:
	case MMC_TIMING_MMC_HS200:
	/* For 200MHz clock, 30 Taps are available */
	tap_max = 30;
	default:
	break;
	}

	tap_delay = (degrees * tap_max) / 360;

	/* Set the Clock Phase */
	if (tap_delay) {
	u32 regval;

	regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
	regval \|= SDHCI_ITAPDLY_CHGWIN;
	sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
	regval \|= SDHCI_ITAPDLY_ENABLE;
	sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
	regval \|= tap_delay;
	sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
	regval &= ~SDHCI_ITAPDLY_CHGWIN;
	sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
	}

	return ret;
	}

	static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
	struct mmc mmc = (struct mmc )host->mmc;
	struct udevice *dev = mmc->dev;
	u8 timing = mode2timing[mmc->selected_mode];
	u32 iclk_phase = clk_data->clk_phase_in[timing];
	u32 oclk_phase = clk_data->clk_phase_out[timing];

	dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);

	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
	device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
	sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
	sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
	} else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
	device_is_compatible(dev, "xlnx,versal-8.9a")) {
	sdhci_versal_sampleclk_set_phase(host, iclk_phase);
	sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
	}
	}

	static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing,
	const char *prop)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
	u32 clk_phase[2] = {0};

	/*
	* Read Tap Delay values from DT, if the DT does not contain the
	* Tap Values then use the pre-defined values
	*/
	if (dev_read_u32_array(dev, prop, &clk_phase[0], 2)) {
	dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
	prop, clk_data->clk_phase_in[timing],
	clk_data->clk_phase_out[timing]);
	return;
	}

	/* The values read are Input and Output Clock Delays in order */
	clk_data->clk_phase_in[timing] = clk_phase[0];
	clk_data->clk_phase_out[timing] = clk_phase[1];
	}

	/**
	* arasan_dt_parse_clk_phases - Read Tap Delay values from DT
	*
	* Called at initialization to parse the values of Tap Delays.
	*
	* @dev: Pointer to our struct udevice.
	*/
	static void arasan_dt_parse_clk_phases(struct udevice *dev)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
	struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
	int i;

	if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
	device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
	for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
	clk_data->clk_phase_in[i] = zynqmp_iclk_phases[i];
	clk_data->clk_phase_out[i] = zynqmp_oclk_phases[i];
	}

	if (priv->bank == MMC_BANK2) {
	clk_data->clk_phase_out[MMC_TIMING_UHS_SDR104] = 90;
	clk_data->clk_phase_out[MMC_TIMING_MMC_HS200] = 90;
	}
	}

	if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
	device_is_compatible(dev, "xlnx,versal-8.9a")) {
	for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
	clk_data->clk_phase_in[i] = versal_iclk_phases[i];
	clk_data->clk_phase_out[i] = versal_oclk_phases[i];
	}
	}

	arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY,
	"clk-phase-legacy");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS,
	"clk-phase-mmc-hs");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_SD_HS,
	"clk-phase-sd-hs");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR12,
	"clk-phase-uhs-sdr12");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR25,
	"clk-phase-uhs-sdr25");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR50,
	"clk-phase-uhs-sdr50");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_SDR104,
	"clk-phase-uhs-sdr104");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_UHS_DDR50,
	"clk-phase-uhs-ddr50");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_DDR52,
	"clk-phase-mmc-ddr52");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS200,
	"clk-phase-mmc-hs200");
	arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS400,
	"clk-phase-mmc-hs400");
	}

	static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
	{
	struct mmc mmc = (struct mmc )host->mmc;
	u32 reg;

	if (!IS_SD(mmc))
	return;

	if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
	reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
	reg \|= SDHCI_CTRL_VDD_180;
	sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
	}

	if (mmc->selected_mode > SD_HS &&
	mmc->selected_mode <= UHS_DDR50)
	sdhci_set_uhs_timing(host);
	}

	const struct sdhci_ops arasan_ops = {
	.platform_execute_tuning = &arasan_sdhci_execute_tuning,
	.set_delay = &arasan_sdhci_set_tapdelay,
	.set_control_reg = &arasan_sdhci_set_control_reg,
	};
	#endif

	static int arasan_sdhci_probe(struct udevice *dev)
	{
	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
	struct arasan_sdhci_priv *priv = dev_get_priv(dev);
	struct sdhci_host *host;
	struct clk clk;
	unsigned long clock;
	int ret;

	host = priv->host;

	ret = clk_get_by_index(dev, 0, &clk);
	if (ret < 0) {
	dev_err(dev, "failed to get clock\n");
	return ret;
	}

	clock = clk_get_rate(&clk);
	if (IS_ERR_VALUE(clock)) {
	dev_err(dev, "failed to get rate\n");
	return clock;
	}

	debug("%s: CLK %ld\n", __func__, clock);

	ret = clk_enable(&clk);
	if (ret && ret != -ENOSYS) {
	dev_err(dev, "failed to enable clock\n");
	return ret;
	}

	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD \|
	SDHCI_QUIRK_BROKEN_R1B;

	#ifdef CONFIG_ZYNQ_HISPD_BROKEN
	host->quirks \|= SDHCI_QUIRK_BROKEN_HISPD_MODE;
	#endif

	if (priv->no_1p8)
	host->quirks \|= SDHCI_QUIRK_NO_1_8_V;

	plat->cfg.f_max = CONFIG_ZYNQ_SDHCI_MAX_FREQ;

	ret = mmc_of_parse(dev, &plat->cfg);
	if (ret)
	return ret;

	host->max_clk = clock;

	host->mmc = &plat->mmc;
	host->mmc->dev = dev;
	host->mmc->priv = host;

	ret = sdhci_setup_cfg(&plat->cfg, host, plat->cfg.f_max,
	CONFIG_ZYNQ_SDHCI_MIN_FREQ);
	if (ret)
	return ret;
	upriv->mmc = host->mmc;

	return sdhci_probe(dev);
	}

	static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
	{
	struct arasan_sdhci_priv *priv = dev_get_priv(dev);

	priv->host = calloc(1, sizeof(struct sdhci_host));
	if (!priv->host)
	return -1;

	priv->host->name = dev->name;

	#if defined(CONFIG_ARCH_ZYNQMP) \|\| defined(CONFIG_ARCH_VERSAL)
	priv->host->ops = &arasan_ops;
	arasan_dt_parse_clk_phases(dev);
	#endif

	priv->host->ioaddr = (void *)dev_read_addr(dev);
	if (IS_ERR(priv->host->ioaddr))
	return PTR_ERR(priv->host->ioaddr);

	priv->deviceid = dev_read_u32_default(dev, "xlnx,device_id", -1);
	priv->bank = dev_read_u32_default(dev, "xlnx,mio-bank", 0);
	priv->no_1p8 = dev_read_bool(dev, "no-1-8-v");

	return 0;
	}

	static int arasan_sdhci_bind(struct udevice *dev)
	{
	struct arasan_sdhci_plat *plat = dev_get_platdata(dev);

	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
	}

	static const struct udevice_id arasan_sdhci_ids[] = {
	{ .compatible = "arasan,sdhci-8.9a" },
	{ }
	};

	U_BOOT_DRIVER(arasan_sdhci_drv) = {
	.name = "arasan_sdhci",
	.id = UCLASS_MMC,
	.of_match = arasan_sdhci_ids,
	.ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
	.ops = &sdhci_ops,
	.bind = arasan_sdhci_bind,
	.probe = arasan_sdhci_probe,
	.priv_auto_alloc_size = sizeof(struct arasan_sdhci_priv),
	.platdata_auto_alloc_size = sizeof(struct arasan_sdhci_plat),
	};