| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <div64.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <pwm.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/pwm.h> |
| #include <linux/bitops.h> |
| #include <power/regulator.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rockchip_pwm_data { |
| struct rockchip_pwm_regs regs; |
| unsigned int prescaler; |
| bool supports_polarity; |
| bool supports_lock; |
| u32 enable_conf; |
| u32 enable_conf_mask; |
| }; |
| |
| struct rk_pwm_priv { |
| fdt_addr_t base; |
| ulong freq; |
| u32 conf_polarity; |
| const struct rockchip_pwm_data *data; |
| }; |
| |
| static int rk_pwm_set_invert(struct udevice *dev, uint channel, bool polarity) |
| { |
| struct rk_pwm_priv *priv = dev_get_priv(dev); |
| |
| if (!priv->data->supports_polarity) { |
| debug("%s: Do not support polarity\n", __func__); |
| return 0; |
| } |
| |
| debug("%s: polarity=%u\n", __func__, polarity); |
| if (polarity) |
| priv->conf_polarity = PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE; |
| else |
| priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_NEGATIVE; |
| |
| return 0; |
| } |
| |
| static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, |
| uint duty_ns) |
| { |
| struct rk_pwm_priv *priv = dev_get_priv(dev); |
| const struct rockchip_pwm_regs *regs = &priv->data->regs; |
| unsigned long period, duty; |
| u32 ctrl; |
| |
| debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns); |
| |
| ctrl = readl(priv->base + regs->ctrl); |
| /* |
| * Lock the period and duty of previous configuration, then |
| * change the duty and period, that would not be effective. |
| */ |
| if (priv->data->supports_lock) { |
| ctrl |= PWM_LOCK; |
| writel(ctrl, priv->base + regs->ctrl); |
| } |
| |
| period = lldiv((uint64_t)priv->freq * period_ns, |
| priv->data->prescaler * 1000000000); |
| duty = lldiv((uint64_t)priv->freq * duty_ns, |
| priv->data->prescaler * 1000000000); |
| |
| writel(period, priv->base + regs->period); |
| writel(duty, priv->base + regs->duty); |
| |
| if (priv->data->supports_polarity) { |
| ctrl &= ~(PWM_DUTY_MASK | PWM_INACTIVE_MASK); |
| ctrl |= priv->conf_polarity; |
| } |
| |
| /* |
| * Unlock and set polarity at the same time, |
| * the configuration of duty, period and polarity |
| * would be effective together at next period. |
| */ |
| if (priv->data->supports_lock) |
| ctrl &= ~PWM_LOCK; |
| writel(ctrl, priv->base + regs->ctrl); |
| |
| debug("%s: period=%lu, duty=%lu\n", __func__, period, duty); |
| |
| return 0; |
| } |
| |
| static int rk_pwm_set_enable(struct udevice *dev, uint channel, bool enable) |
| { |
| struct rk_pwm_priv *priv = dev_get_priv(dev); |
| const struct rockchip_pwm_regs *regs = &priv->data->regs; |
| u32 ctrl; |
| |
| debug("%s: Enable '%s'\n", __func__, dev->name); |
| |
| ctrl = readl(priv->base + regs->ctrl); |
| ctrl &= ~priv->data->enable_conf_mask; |
| |
| if (enable) |
| ctrl |= priv->data->enable_conf; |
| else |
| ctrl &= ~priv->data->enable_conf; |
| |
| writel(ctrl, priv->base + regs->ctrl); |
| |
| return 0; |
| } |
| |
| static int rk_pwm_of_to_plat(struct udevice *dev) |
| { |
| struct rk_pwm_priv *priv = dev_get_priv(dev); |
| |
| priv->base = dev_read_addr(dev); |
| |
| return 0; |
| } |
| |
| static int rk_pwm_probe(struct udevice *dev) |
| { |
| struct rk_pwm_priv *priv = dev_get_priv(dev); |
| struct clk clk; |
| int ret = 0; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) { |
| debug("%s get clock fail!\n", __func__); |
| return -EINVAL; |
| } |
| |
| priv->freq = clk_get_rate(&clk); |
| priv->data = (struct rockchip_pwm_data *)dev_get_driver_data(dev); |
| |
| if (priv->data->supports_polarity) |
| priv->conf_polarity = PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE; |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops rk_pwm_ops = { |
| .set_invert = rk_pwm_set_invert, |
| .set_config = rk_pwm_set_config, |
| .set_enable = rk_pwm_set_enable, |
| }; |
| |
| static const struct rockchip_pwm_data pwm_data_v1 = { |
| .regs = { |
| .duty = 0x04, |
| .period = 0x08, |
| .cntr = 0x00, |
| .ctrl = 0x0c, |
| }, |
| .prescaler = 2, |
| .supports_polarity = false, |
| .supports_lock = false, |
| .enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN, |
| .enable_conf_mask = BIT(1) | BIT(3), |
| }; |
| |
| static const struct rockchip_pwm_data pwm_data_v2 = { |
| .regs = { |
| .duty = 0x08, |
| .period = 0x04, |
| .cntr = 0x00, |
| .ctrl = 0x0c, |
| }, |
| .prescaler = 1, |
| .supports_polarity = true, |
| .supports_lock = false, |
| .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE | |
| PWM_CONTINUOUS, |
| .enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8), |
| }; |
| |
| static const struct rockchip_pwm_data pwm_data_v3 = { |
| .regs = { |
| .duty = 0x08, |
| .period = 0x04, |
| .cntr = 0x00, |
| .ctrl = 0x0c, |
| }, |
| .prescaler = 1, |
| .supports_polarity = true, |
| .supports_lock = true, |
| .enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | RK_PWM_ENABLE | |
| PWM_CONTINUOUS, |
| .enable_conf_mask = GENMASK(2, 0) | BIT(5) | BIT(8), |
| }; |
| |
| static const struct udevice_id rk_pwm_ids[] = { |
| { .compatible = "rockchip,rk2928-pwm", .data = (ulong)&pwm_data_v1}, |
| { .compatible = "rockchip,rk3288-pwm", .data = (ulong)&pwm_data_v2}, |
| { .compatible = "rockchip,rk3328-pwm", .data = (ulong)&pwm_data_v3}, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rk_pwm) = { |
| .name = "rk_pwm", |
| .id = UCLASS_PWM, |
| .of_match = rk_pwm_ids, |
| .ops = &rk_pwm_ops, |
| .of_to_plat = rk_pwm_of_to_plat, |
| .probe = rk_pwm_probe, |
| .priv_auto = sizeof(struct rk_pwm_priv), |
| }; |