| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * Device Tree Include file for Freescale Layerscape-1046A family SoC. |
| * |
| * Copyright (C) 2016, Freescale Semiconductor |
| * |
| * Mingkai Hu <mingkai.hu@nxp.com> |
| */ |
| |
| /include/ "skeleton64.dtsi" |
| |
| / { |
| compatible = "fsl,ls1046a"; |
| interrupt-parent = <&gic>; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| gic: interrupt-controller@1400000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x1410000 0 0x10000>, /* GICD */ |
| <0x0 0x1420000 0 0x10000>, /* GICC */ |
| <0x0 0x1440000 0 0x20000>, /* GICH */ |
| <0x0 0x1460000 0 0x20000>; /* GICV */ |
| interrupts = <1 9 0xf08>; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| clockgen: clocking@1ee1000 { |
| compatible = "fsl,ls1046a-clockgen"; |
| reg = <0x0 0x1ee1000 0x0 0x1000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| dspi0: dspi@2100000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <0 64 0x4>; |
| clock-names = "dspi"; |
| clocks = <&clockgen 4 0>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| dspi1: dspi@2110000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <0 65 0x4>; |
| clock-names = "dspi"; |
| clocks = <&clockgen 4 0>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| esdhc: esdhc@1560000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x1560000 0x0 0x10000>; |
| interrupts = <0 62 0x4>; |
| big-endian; |
| bus-width = <4>; |
| }; |
| |
| gpio0: gpio@2300000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <0 66 4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@2310000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <0 67 4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <0 68 4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2330000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <0 134 4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| ifc: ifc@1530000 { |
| compatible = "fsl,ifc", "simple-bus"; |
| reg = <0x0 0x1530000 0x0 0x10000>; |
| interrupts = <0 43 0x4>; |
| }; |
| |
| i2c0: i2c@2180000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2180000 0x0 0x10000>; |
| interrupts = <0 56 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2190000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2190000 0x0 0x10000>; |
| interrupts = <0 57 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a0000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21a0000 0x0 0x10000>; |
| interrupts = <0 58 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@21b0000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21b0000 0x0 0x10000>; |
| interrupts = <0 59 0x4>; |
| clock-names = "i2c"; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| duart0: serial@21c0500 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x00 0x21c0500 0x0 0x100>; |
| interrupts = <0 54 0x4>; |
| clocks = <&clockgen 4 0>; |
| }; |
| |
| duart1: serial@21c0600 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x00 0x21c0600 0x0 0x100>; |
| interrupts = <0 54 0x4>; |
| clocks = <&clockgen 4 0>; |
| }; |
| |
| duart2: serial@21d0500 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21d0500 0x0 0x100>; |
| interrupts = <0 55 0x4>; |
| clocks = <&clockgen 4 0>; |
| }; |
| |
| duart3: serial@21d0600 { |
| compatible = "fsl,ns16550", "ns16550a"; |
| reg = <0x0 0x21d0600 0x0 0x100>; |
| interrupts = <0 55 0x4>; |
| clocks = <&clockgen 4 0>; |
| }; |
| |
| lpuart0: serial@2950000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2950000 0x0 0x1000>; |
| interrupts = <0 48 0x4>; |
| clocks = <&clockgen 4 0>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@2960000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2960000 0x0 0x1000>; |
| interrupts = <0 49 0x4>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@2970000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2970000 0x0 0x1000>; |
| interrupts = <0 50 0x4>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@2980000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2980000 0x0 0x1000>; |
| interrupts = <0 51 0x4>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@2990000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2990000 0x0 0x1000>; |
| interrupts = <0 52 0x4>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@29a0000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x29a0000 0x0 0x1000>; |
| interrupts = <0 53 0x4>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| qspi: quadspi@1550000 { |
| compatible = "fsl,ls1021a-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x1550000 0x0 0x10000>, |
| <0x0 0x40000000 0x0 0x10000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| status = "disabled"; |
| }; |
| |
| usb0: usb@2f00000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x2f00000 0x0 0x10000>; |
| interrupts = <0 60 4>; |
| dr_mode = "host"; |
| }; |
| |
| usb1: usb@3000000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3000000 0x0 0x10000>; |
| interrupts = <0 61 4>; |
| dr_mode = "host"; |
| }; |
| |
| usb2: usb@3100000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <0 63 4>; |
| dr_mode = "host"; |
| }; |
| |
| pcie1: pcie@3400000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03480000 0x0 0x40000 /* lut registers */ |
| 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ |
| 0x40 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "ctrl", "config"; |
| big-endian; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x40 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie_ep1: pcie_ep@3400000 { |
| compatible = "fsl,ls-pcie-ep"; |
| reg = <0x00 0x03400000 0x0 0x80000 |
| 0x00 0x034c0000 0x0 0x40000 |
| 0x40 0x00000000 0x8 0x00000000>; |
| reg-names = "regs", "ctrl", "addr_space"; |
| num-ib-windows = <6>; |
| num-ob-windows = <8>; |
| big-endian; |
| }; |
| |
| pcie2: pcie@3500000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03580000 0x0 0x40000 /* lut registers */ |
| 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ |
| 0x48 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "ctrl", "config"; |
| big-endian; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <2>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x48 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie_ep2: pcie_ep@3500000 { |
| compatible = "fsl,ls-pcie-ep"; |
| reg = <0x00 0x03500000 0x0 0x80000 |
| 0x00 0x035c0000 0x0 0x40000 |
| 0x48 0x00000000 0x8 0x00000000>; |
| reg-names = "regs", "ctrl", "addr_space"; |
| num-ib-windows = <6>; |
| num-ob-windows = <8>; |
| big-endian; |
| }; |
| |
| pcie3: pcie@3600000 { |
| compatible = "fsl,ls-pcie", "snps,dw-pcie"; |
| reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */ |
| 0x00 0x03680000 0x0 0x40000 /* lut registers */ |
| 0x00 0x036c0000 0x0 0x40000 /* pf controls registers */ |
| 0x50 0x00000000 0x0 0x20000>; /* configuration space */ |
| reg-names = "dbi", "lut", "ctrl", "config"; |
| big-endian; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000 /* downstream I/O */ |
| 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| }; |
| |
| pcie_ep3: pcie_ep@3600000 { |
| compatible = "fsl,ls-pcie-ep"; |
| reg = <0x00 0x03600000 0x0 0x80000 |
| 0x00 0x036c0000 0x0 0x40000 |
| 0x50 0x00000000 0x8 0x00000000>; |
| reg-names = "regs", "ctrl", "addr_space"; |
| num-ib-windows = <6>; |
| num-ob-windows = <8>; |
| big-endian; |
| }; |
| |
| sata: sata@3200000 { |
| compatible = "fsl,ls1046a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ |
| 0x0 0x20140520 0x0 0x4>; /* ecc sata addr*/ |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <0 69 4>; |
| clocks = <&clockgen 4 1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |