| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * NXP lx2160a SOC common device tree source |
| * |
| * Copyright 2018 NXP |
| * |
| */ |
| |
| / { |
| compatible = "fsl,lx2160a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x80000000 0 0x80000000>; |
| /* DRAM space - 1, size : 2 GB DRAM */ |
| }; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| clockgen: clocking@1300000 { |
| compatible = "fsl,ls2080a-clockgen"; |
| reg = <0 0x1300000 0 0xa0000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| gic: interrupt-controller@6000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ |
| <0x0 0x06200000 0 0x100000>; /* GICR */ |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <1 9 0x4>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ |
| <1 14 0x8>, /* Physical NS PPI, active-low */ |
| <1 11 0x8>, /* Virtual PPI, active-low */ |
| <1 10 0x8>; /* Hypervisor PPI, active-low */ |
| }; |
| |
| i2c0: i2c@2000000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2000000 0x0 0x10000>; |
| interrupts = <0 34 4>; |
| scl-gpio = <&gpio2 15 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2010000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2010000 0x0 0x10000>; |
| interrupts = <0 34 4>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2020000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2020000 0x0 0x10000>; |
| interrupts = <0 35 4>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@2030000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2030000 0x0 0x10000>; |
| interrupts = <0 35 4>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@2040000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2040000 0x0 0x10000>; |
| interrupts = <0 74 4>; |
| scl-gpio = <&gpio2 16 0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@2050000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2050000 0x0 0x10000>; |
| interrupts = <0 74 4>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@2060000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2060000 0x0 0x10000>; |
| interrupts = <0 75 4>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@2070000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2070000 0x0 0x10000>; |
| interrupts = <0 75 4>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21c0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21d0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21d0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21e0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21e0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21f0000 { |
| compatible = "arm,pl011"; |
| reg = <0x0 0x21f0000 0x0 0x1000>; |
| clocks = <&clockgen 4 0>; |
| status = "disabled"; |
| }; |
| |
| dspi0: dspi@2100000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <0 26 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| dspi1: dspi@2110000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <0 26 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| dspi2: dspi@2120000 { |
| compatible = "fsl,vf610-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2120000 0x0 0x10000>; |
| interrupts = <0 241 0x4>; /* Level high type */ |
| num-cs = <6>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <0 37 4>; |
| gpio-controller; |
| little-endian; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| usb0: usb3@3100000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <0 80 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| usb1: usb3@3110000 { |
| compatible = "fsl,layerscape-dwc3"; |
| reg = <0x0 0x3110000 0x0 0x10000>; |
| interrupts = <0 81 0x4>; /* Level high type */ |
| dr_mode = "host"; |
| }; |
| |
| esdhc0: esdhc@2140000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2140000 0x0 0x10000>; |
| interrupts = <0 28 0x4>; /* Level high type */ |
| clocks = <&clockgen 4 1>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc1: esdhc@2150000 { |
| compatible = "fsl,esdhc"; |
| reg = <0x0 0x2150000 0x0 0x10000>; |
| interrupts = <0 63 0x4>; /* Level high type */ |
| clocks = <&clockgen 4 1>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| non-removable; |
| little-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sata0: sata@3200000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>; |
| interrupts = <0 133 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata1: sata@3210000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3210000 0x0 0x10000>; |
| interrupts = <0 136 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata2: sata@3220000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3220000 0x0 0x10000>; |
| interrupts = <0 97 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| sata3: sata@3230000 { |
| compatible = "fsl,ls2080a-ahci"; |
| reg = <0x0 0x3230000 0x0 0x10000>; |
| interrupts = <0 100 4>; |
| clocks = <&clockgen 4 3>; |
| status = "disabled"; |
| |
| }; |
| |
| pcie@3400000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03480000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x034c0000 0x0 0x40000 /* PF control registers */ |
| 0x80 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; |
| }; |
| |
| pcie@3500000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03500000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03580000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x035c0000 0x0 0x40000 /* PF control registers */ |
| 0x88 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-lanes = <2>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; |
| }; |
| |
| pcie@3600000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03600000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03680000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x036c0000 0x0 0x40000 /* PF control registers */ |
| 0x90 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; |
| }; |
| |
| pcie@3700000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03700000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03780000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x037c0000 0x0 0x40000 /* PF control registers */ |
| 0x98 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; |
| }; |
| |
| pcie@3800000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03800000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03880000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x038c0000 0x0 0x40000 /* PF control registers */ |
| 0xa0 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; |
| }; |
| |
| pcie@3900000 { |
| compatible = "fsl,lx2160a-pcie"; |
| reg = <0x00 0x03900000 0x0 0x80000 /* PAB registers */ |
| 0x00 0x03980000 0x0 0x40000 /* LUT registers */ |
| 0x00 0x039c0000 0x0 0x40000 /* PF control registers */ |
| 0xa8 0x00000000 0x0 0x1000>; /* configuration space */ |
| reg-names = "ccsr", "lut", "pf_ctrl", "config"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; |
| }; |
| }; |