| /* |
| * |
| * (C) Copyright 2000-2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <netdev.h> |
| |
| #include <asm/immap.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| volatile rcm_t *rcm = (rcm_t *) (MMAP_RCM); |
| |
| udelay(1000); |
| rcm->rcr |= RCM_RCR_SOFTRST; |
| |
| /* we don't return! */ |
| return 0; |
| }; |
| |
| int checkcpu(void) |
| { |
| volatile ccm_t *ccm = (ccm_t *) MMAP_CCM; |
| u16 msk; |
| u16 id = 0; |
| u8 ver; |
| |
| puts("CPU: "); |
| msk = (ccm->cir >> 6); |
| ver = (ccm->cir & 0x003f); |
| switch (msk) { |
| #ifdef CONFIG_MCF5301x |
| case 0x78: |
| id = 53010; |
| break; |
| case 0x77: |
| id = 53012; |
| break; |
| case 0x76: |
| id = 53015; |
| break; |
| case 0x74: |
| id = 53011; |
| break; |
| case 0x73: |
| id = 53013; |
| break; |
| #endif |
| #ifdef CONFIG_MCF532x |
| case 0x54: |
| id = 5329; |
| break; |
| case 0x59: |
| id = 5328; |
| break; |
| case 0x61: |
| id = 5327; |
| break; |
| case 0x65: |
| id = 5373; |
| break; |
| case 0x68: |
| id = 53721; |
| break; |
| case 0x69: |
| id = 5372; |
| break; |
| case 0x6B: |
| id = 5372; |
| break; |
| #endif |
| } |
| |
| if (id) { |
| char buf1[32], buf2[32]; |
| |
| printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, |
| ver); |
| printf(" CPU CLK %s MHz BUS CLK %s MHz\n", |
| strmhz(buf1, gd->cpu_clk), |
| strmhz(buf2, gd->bus_clk)); |
| } |
| |
| return 0; |
| }; |
| |
| #if defined(CONFIG_WATCHDOG) |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| |
| wdp->sr = 0x5555; /* Count register */ |
| wdp->sr = 0xAAAA; /* Count register */ |
| } |
| |
| int watchdog_disable(void) |
| { |
| volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| |
| /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */ |
| wdp->cr |= WTM_WCR_HALTED; /* halted watchdog timer */ |
| |
| puts("WATCHDOG:disabled\n"); |
| return (0); |
| } |
| |
| int watchdog_init(void) |
| { |
| volatile wdog_t *wdp = (wdog_t *) (MMAP_WDOG); |
| u32 wdog_module = 0; |
| |
| /* set timeout and enable watchdog */ |
| wdog_module = ((CONFIG_SYS_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); |
| #ifdef CONFIG_M5329 |
| wdp->mr = (wdog_module / 8192); |
| #else |
| wdp->mr = (wdog_module / 4096); |
| #endif |
| |
| wdp->cr = WTM_WCR_EN; |
| puts("WATCHDOG:enabled\n"); |
| |
| return (0); |
| } |
| #endif /* CONFIG_WATCHDOG */ |
| |
| #if defined(CONFIG_MCFFEC) |
| /* Default initializations for MCFFEC controllers. To override, |
| * create a board-specific function called: |
| * int board_eth_init(bd_t *bis) |
| */ |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| return mcffec_initialize(bis); |
| } |
| #endif |