| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <div64.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/pcc.h> |
| #include <asm/arch/sys_proto.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| scg_p scg1_regs = (scg_p)SCG1_RBASE; |
| |
| static u32 scg_src_get_rate(enum scg_clk clksrc) |
| { |
| u32 reg; |
| |
| switch (clksrc) { |
| case SCG_SOSC_CLK: |
| reg = readl(&scg1_regs->sosccsr); |
| if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK)) |
| return 0; |
| |
| return 24000000; |
| case SCG_FIRC_CLK: |
| reg = readl(&scg1_regs->firccsr); |
| if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK)) |
| return 0; |
| |
| return 48000000; |
| case SCG_SIRC_CLK: |
| reg = readl(&scg1_regs->sirccsr); |
| if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK)) |
| return 0; |
| |
| return 16000000; |
| case SCG_ROSC_CLK: |
| reg = readl(&scg1_regs->rtccsr); |
| if (!(reg & SCG_ROSC_CSR_ROSCVLD_MASK)) |
| return 0; |
| |
| return 32768; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static u32 scg_sircdiv_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask; |
| |
| switch (clk) { |
| case SCG_SIRC_DIV1_CLK: |
| mask = SCG_SIRCDIV_DIV1_MASK; |
| shift = SCG_SIRCDIV_DIV1_SHIFT; |
| break; |
| case SCG_SIRC_DIV2_CLK: |
| mask = SCG_SIRCDIV_DIV2_MASK; |
| shift = SCG_SIRCDIV_DIV2_SHIFT; |
| break; |
| case SCG_SIRC_DIV3_CLK: |
| mask = SCG_SIRCDIV_DIV3_MASK; |
| shift = SCG_SIRCDIV_DIV3_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&scg1_regs->sirccsr); |
| if (!(reg & SCG_SIRC_CSR_SIRCVLD_MASK)) |
| return 0; |
| |
| reg = readl(&scg1_regs->sircdiv); |
| val = (reg & mask) >> shift; |
| |
| if (!val) /*clock disabled*/ |
| return 0; |
| |
| rate = scg_src_get_rate(SCG_SIRC_CLK); |
| rate = rate / (1 << (val - 1)); |
| |
| return rate; |
| } |
| |
| static u32 scg_fircdiv_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask; |
| |
| switch (clk) { |
| case SCG_FIRC_DIV1_CLK: |
| mask = SCG_FIRCDIV_DIV1_MASK; |
| shift = SCG_FIRCDIV_DIV1_SHIFT; |
| break; |
| case SCG_FIRC_DIV2_CLK: |
| mask = SCG_FIRCDIV_DIV2_MASK; |
| shift = SCG_FIRCDIV_DIV2_SHIFT; |
| break; |
| case SCG_FIRC_DIV3_CLK: |
| mask = SCG_FIRCDIV_DIV3_MASK; |
| shift = SCG_FIRCDIV_DIV3_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&scg1_regs->firccsr); |
| if (!(reg & SCG_FIRC_CSR_FIRCVLD_MASK)) |
| return 0; |
| |
| reg = readl(&scg1_regs->fircdiv); |
| val = (reg & mask) >> shift; |
| |
| if (!val) /*clock disabled*/ |
| return 0; |
| |
| rate = scg_src_get_rate(SCG_FIRC_CLK); |
| rate = rate / (1 << (val - 1)); |
| |
| return rate; |
| } |
| |
| static u32 scg_soscdiv_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask; |
| |
| switch (clk) { |
| case SCG_SOSC_DIV1_CLK: |
| mask = SCG_SOSCDIV_DIV1_MASK; |
| shift = SCG_SOSCDIV_DIV1_SHIFT; |
| break; |
| case SCG_SOSC_DIV2_CLK: |
| mask = SCG_SOSCDIV_DIV2_MASK; |
| shift = SCG_SOSCDIV_DIV2_SHIFT; |
| break; |
| case SCG_SOSC_DIV3_CLK: |
| mask = SCG_SOSCDIV_DIV3_MASK; |
| shift = SCG_SOSCDIV_DIV3_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&scg1_regs->sosccsr); |
| if (!(reg & SCG_SOSC_CSR_SOSCVLD_MASK)) |
| return 0; |
| |
| reg = readl(&scg1_regs->soscdiv); |
| val = (reg & mask) >> shift; |
| |
| if (!val) /*clock disabled*/ |
| return 0; |
| |
| rate = scg_src_get_rate(SCG_SOSC_CLK); |
| rate = rate / (1 << (val - 1)); |
| |
| return rate; |
| } |
| |
| static u32 scg_apll_pfd_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask, gate, valid; |
| |
| switch (clk) { |
| case SCG_APLL_PFD0_CLK: |
| gate = SCG_PLL_PFD0_GATE_MASK; |
| valid = SCG_PLL_PFD0_VALID_MASK; |
| mask = SCG_PLL_PFD0_FRAC_MASK; |
| shift = SCG_PLL_PFD0_FRAC_SHIFT; |
| break; |
| case SCG_APLL_PFD1_CLK: |
| gate = SCG_PLL_PFD1_GATE_MASK; |
| valid = SCG_PLL_PFD1_VALID_MASK; |
| mask = SCG_PLL_PFD1_FRAC_MASK; |
| shift = SCG_PLL_PFD1_FRAC_SHIFT; |
| break; |
| case SCG_APLL_PFD2_CLK: |
| gate = SCG_PLL_PFD2_GATE_MASK; |
| valid = SCG_PLL_PFD2_VALID_MASK; |
| mask = SCG_PLL_PFD2_FRAC_MASK; |
| shift = SCG_PLL_PFD2_FRAC_SHIFT; |
| break; |
| case SCG_APLL_PFD3_CLK: |
| gate = SCG_PLL_PFD3_GATE_MASK; |
| valid = SCG_PLL_PFD3_VALID_MASK; |
| mask = SCG_PLL_PFD3_FRAC_MASK; |
| shift = SCG_PLL_PFD3_FRAC_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&scg1_regs->apllpfd); |
| if (reg & gate || !(reg & valid)) |
| return 0; |
| |
| clk_debug("scg_apll_pfd_get_rate reg 0x%x\n", reg); |
| |
| val = (reg & mask) >> shift; |
| rate = decode_pll(PLL_A7_APLL); |
| |
| rate = rate / val * 18; |
| |
| clk_debug("scg_apll_pfd_get_rate rate %u\n", rate); |
| |
| return rate; |
| } |
| |
| static u32 scg_spll_pfd_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask, gate, valid; |
| |
| switch (clk) { |
| case SCG_SPLL_PFD0_CLK: |
| gate = SCG_PLL_PFD0_GATE_MASK; |
| valid = SCG_PLL_PFD0_VALID_MASK; |
| mask = SCG_PLL_PFD0_FRAC_MASK; |
| shift = SCG_PLL_PFD0_FRAC_SHIFT; |
| break; |
| case SCG_SPLL_PFD1_CLK: |
| gate = SCG_PLL_PFD1_GATE_MASK; |
| valid = SCG_PLL_PFD1_VALID_MASK; |
| mask = SCG_PLL_PFD1_FRAC_MASK; |
| shift = SCG_PLL_PFD1_FRAC_SHIFT; |
| break; |
| case SCG_SPLL_PFD2_CLK: |
| gate = SCG_PLL_PFD2_GATE_MASK; |
| valid = SCG_PLL_PFD2_VALID_MASK; |
| mask = SCG_PLL_PFD2_FRAC_MASK; |
| shift = SCG_PLL_PFD2_FRAC_SHIFT; |
| break; |
| case SCG_SPLL_PFD3_CLK: |
| gate = SCG_PLL_PFD3_GATE_MASK; |
| valid = SCG_PLL_PFD3_VALID_MASK; |
| mask = SCG_PLL_PFD3_FRAC_MASK; |
| shift = SCG_PLL_PFD3_FRAC_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| reg = readl(&scg1_regs->spllpfd); |
| if (reg & gate || !(reg & valid)) |
| return 0; |
| |
| clk_debug("scg_spll_pfd_get_rate reg 0x%x\n", reg); |
| |
| val = (reg & mask) >> shift; |
| rate = decode_pll(PLL_A7_SPLL); |
| |
| rate = rate / val * 18; |
| |
| clk_debug("scg_spll_pfd_get_rate rate %u\n", rate); |
| |
| return rate; |
| } |
| |
| static u32 scg_apll_get_rate(void) |
| { |
| u32 reg, val, rate; |
| |
| reg = readl(&scg1_regs->apllcfg); |
| val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT; |
| |
| if (!val) { |
| /* APLL clock after two dividers */ |
| rate = decode_pll(PLL_A7_APLL); |
| |
| val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >> |
| SCG_PLL_CFG_POSTDIV1_SHIFT; |
| rate = rate / (val + 1); |
| |
| val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >> |
| SCG_PLL_CFG_POSTDIV2_SHIFT; |
| rate = rate / (val + 1); |
| } else { |
| /* APLL PFD clock */ |
| val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >> |
| SCG_PLL_CFG_PFDSEL_SHIFT; |
| rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val); |
| } |
| |
| return rate; |
| } |
| |
| static u32 scg_spll_get_rate(void) |
| { |
| u32 reg, val, rate; |
| |
| reg = readl(&scg1_regs->spllcfg); |
| val = (reg & SCG_PLL_CFG_PLLSEL_MASK) >> SCG_PLL_CFG_PLLSEL_SHIFT; |
| |
| clk_debug("scg_spll_get_rate reg 0x%x\n", reg); |
| |
| if (!val) { |
| /* APLL clock after two dividers */ |
| rate = decode_pll(PLL_A7_SPLL); |
| |
| val = (reg & SCG_PLL_CFG_POSTDIV1_MASK) >> |
| SCG_PLL_CFG_POSTDIV1_SHIFT; |
| rate = rate / (val + 1); |
| |
| val = (reg & SCG_PLL_CFG_POSTDIV2_MASK) >> |
| SCG_PLL_CFG_POSTDIV2_SHIFT; |
| rate = rate / (val + 1); |
| |
| clk_debug("scg_spll_get_rate SPLL %u\n", rate); |
| |
| } else { |
| /* APLL PFD clock */ |
| val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >> |
| SCG_PLL_CFG_PFDSEL_SHIFT; |
| rate = scg_spll_pfd_get_rate(SCG_SPLL_PFD0_CLK + val); |
| |
| clk_debug("scg_spll_get_rate PFD %u\n", rate); |
| } |
| |
| return rate; |
| } |
| |
| static u32 scg_ddr_get_rate(void) |
| { |
| u32 reg, val, rate, div; |
| |
| reg = readl(&scg1_regs->ddrccr); |
| val = (reg & SCG_DDRCCR_DDRCS_MASK) >> SCG_DDRCCR_DDRCS_SHIFT; |
| div = (reg & SCG_DDRCCR_DDRDIV_MASK) >> SCG_DDRCCR_DDRDIV_SHIFT; |
| |
| if (!div) |
| return 0; |
| |
| if (!val) { |
| reg = readl(&scg1_regs->apllcfg); |
| val = (reg & SCG_PLL_CFG_PFDSEL_MASK) >> |
| SCG_PLL_CFG_PFDSEL_SHIFT; |
| rate = scg_apll_pfd_get_rate(SCG_APLL_PFD0_CLK + val); |
| } else { |
| rate = decode_pll(PLL_USB); |
| } |
| |
| rate = rate / (1 << (div - 1)); |
| return rate; |
| } |
| |
| static u32 scg_nic_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| u32 shift, mask; |
| |
| reg = readl(&scg1_regs->niccsr); |
| val = (reg & SCG_NICCSR_NICCS_MASK) >> SCG_NICCSR_NICCS_SHIFT; |
| |
| clk_debug("scg_nic_get_rate niccsr 0x%x\n", reg); |
| |
| if (!val) |
| rate = scg_src_get_rate(SCG_FIRC_CLK); |
| else |
| rate = scg_ddr_get_rate(); |
| |
| clk_debug("scg_nic_get_rate parent rate %u\n", rate); |
| |
| val = (reg & SCG_NICCSR_NIC0DIV_MASK) >> SCG_NICCSR_NIC0DIV_SHIFT; |
| |
| rate = rate / (val + 1); |
| |
| clk_debug("scg_nic_get_rate NIC0 rate %u\n", rate); |
| |
| switch (clk) { |
| case SCG_NIC0_CLK: |
| return rate; |
| case SCG_GPU_CLK: |
| mask = SCG_NICCSR_GPUDIV_MASK; |
| shift = SCG_NICCSR_GPUDIV_SHIFT; |
| break; |
| case SCG_NIC1_EXT_CLK: |
| case SCG_NIC1_BUS_CLK: |
| case SCG_NIC1_CLK: |
| mask = SCG_NICCSR_NIC1DIV_MASK; |
| shift = SCG_NICCSR_NIC1DIV_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| val = (reg & mask) >> shift; |
| rate = rate / (val + 1); |
| |
| clk_debug("scg_nic_get_rate NIC1 rate %u\n", rate); |
| |
| switch (clk) { |
| case SCG_GPU_CLK: |
| case SCG_NIC1_CLK: |
| return rate; |
| case SCG_NIC1_EXT_CLK: |
| mask = SCG_NICCSR_NIC1EXTDIV_MASK; |
| shift = SCG_NICCSR_NIC1EXTDIV_SHIFT; |
| break; |
| case SCG_NIC1_BUS_CLK: |
| mask = SCG_NICCSR_NIC1BUSDIV_MASK; |
| shift = SCG_NICCSR_NIC1BUSDIV_SHIFT; |
| break; |
| default: |
| return 0; |
| } |
| |
| val = (reg & mask) >> shift; |
| rate = rate / (val + 1); |
| |
| clk_debug("scg_nic_get_rate NIC1 bus rate %u\n", rate); |
| return rate; |
| } |
| |
| |
| static enum scg_clk scg_scs_array[4] = { |
| SCG_SOSC_CLK, SCG_SIRC_CLK, SCG_FIRC_CLK, SCG_ROSC_CLK, |
| }; |
| |
| static u32 scg_sys_get_rate(enum scg_clk clk) |
| { |
| u32 reg, val, rate; |
| |
| if (clk != SCG_CORE_CLK && clk != SCG_BUS_CLK) |
| return 0; |
| |
| reg = readl(&scg1_regs->csr); |
| val = (reg & SCG_CCR_SCS_MASK) >> SCG_CCR_SCS_SHIFT; |
| |
| clk_debug("scg_sys_get_rate reg 0x%x\n", reg); |
| |
| switch (val) { |
| case SCG_SCS_SYS_OSC: |
| case SCG_SCS_SLOW_IRC: |
| case SCG_SCS_FAST_IRC: |
| case SCG_SCS_RTC_OSC: |
| rate = scg_src_get_rate(scg_scs_array[val]); |
| break; |
| case 5: |
| rate = scg_apll_get_rate(); |
| break; |
| case 6: |
| rate = scg_spll_get_rate(); |
| break; |
| default: |
| return 0; |
| } |
| |
| clk_debug("scg_sys_get_rate parent rate %u\n", rate); |
| |
| val = (reg & SCG_CCR_DIVCORE_MASK) >> SCG_CCR_DIVCORE_SHIFT; |
| |
| rate = rate / (val + 1); |
| |
| if (clk == SCG_BUS_CLK) { |
| val = (reg & SCG_CCR_DIVBUS_MASK) >> SCG_CCR_DIVBUS_SHIFT; |
| rate = rate / (val + 1); |
| } |
| |
| return rate; |
| } |
| |
| u32 decode_pll(enum pll_clocks pll) |
| { |
| u32 reg, pre_div, infreq, mult; |
| u32 num, denom; |
| |
| /* |
| * Alought there are four choices for the bypass src, |
| * we choose OSC_24M which is the default set in ROM. |
| */ |
| switch (pll) { |
| case PLL_A7_SPLL: |
| reg = readl(&scg1_regs->spllcsr); |
| |
| if (!(reg & SCG_SPLL_CSR_SPLLVLD_MASK)) |
| return 0; |
| |
| reg = readl(&scg1_regs->spllcfg); |
| |
| pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >> |
| SCG_PLL_CFG_PREDIV_SHIFT; |
| pre_div += 1; |
| |
| mult = (reg & SCG1_SPLL_CFG_MULT_MASK) >> |
| SCG_PLL_CFG_MULT_SHIFT; |
| |
| infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >> |
| SCG_PLL_CFG_CLKSRC_SHIFT; |
| if (!infreq) |
| infreq = scg_src_get_rate(SCG_SOSC_CLK); |
| else |
| infreq = scg_src_get_rate(SCG_FIRC_CLK); |
| |
| num = readl(&scg1_regs->spllnum); |
| denom = readl(&scg1_regs->splldenom); |
| |
| infreq = infreq / pre_div; |
| |
| return infreq * mult + infreq * num / denom; |
| |
| case PLL_A7_APLL: |
| reg = readl(&scg1_regs->apllcsr); |
| |
| if (!(reg & SCG_APLL_CSR_APLLVLD_MASK)) |
| return 0; |
| |
| reg = readl(&scg1_regs->apllcfg); |
| |
| pre_div = (reg & SCG_PLL_CFG_PREDIV_MASK) >> |
| SCG_PLL_CFG_PREDIV_SHIFT; |
| pre_div += 1; |
| |
| mult = (reg & SCG_APLL_CFG_MULT_MASK) >> |
| SCG_PLL_CFG_MULT_SHIFT; |
| |
| infreq = (reg & SCG_PLL_CFG_CLKSRC_MASK) >> |
| SCG_PLL_CFG_CLKSRC_SHIFT; |
| if (!infreq) |
| infreq = scg_src_get_rate(SCG_SOSC_CLK); |
| else |
| infreq = scg_src_get_rate(SCG_FIRC_CLK); |
| |
| num = readl(&scg1_regs->apllnum); |
| denom = readl(&scg1_regs->aplldenom); |
| |
| infreq = infreq / pre_div; |
| |
| return infreq * mult + infreq * num / denom; |
| |
| case PLL_USB: |
| reg = readl(&scg1_regs->upllcsr); |
| |
| if (!(reg & SCG_UPLL_CSR_UPLLVLD_MASK)) |
| return 0; |
| |
| return 480000000u; |
| |
| case PLL_MIPI: |
| return 480000000u; |
| default: |
| printf("Unsupported pll clocks %d\n", pll); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| u32 scg_clk_get_rate(enum scg_clk clk) |
| { |
| switch (clk) { |
| case SCG_SIRC_DIV1_CLK: |
| case SCG_SIRC_DIV2_CLK: |
| case SCG_SIRC_DIV3_CLK: |
| return scg_sircdiv_get_rate(clk); |
| |
| case SCG_FIRC_DIV1_CLK: |
| case SCG_FIRC_DIV2_CLK: |
| case SCG_FIRC_DIV3_CLK: |
| return scg_fircdiv_get_rate(clk); |
| |
| case SCG_SOSC_DIV1_CLK: |
| case SCG_SOSC_DIV2_CLK: |
| case SCG_SOSC_DIV3_CLK: |
| return scg_soscdiv_get_rate(clk); |
| |
| case SCG_CORE_CLK: |
| case SCG_BUS_CLK: |
| return scg_sys_get_rate(clk); |
| |
| case SCG_SPLL_PFD0_CLK: |
| case SCG_SPLL_PFD1_CLK: |
| case SCG_SPLL_PFD2_CLK: |
| case SCG_SPLL_PFD3_CLK: |
| return scg_spll_pfd_get_rate(clk); |
| |
| case SCG_APLL_PFD0_CLK: |
| case SCG_APLL_PFD1_CLK: |
| case SCG_APLL_PFD2_CLK: |
| case SCG_APLL_PFD3_CLK: |
| return scg_apll_pfd_get_rate(clk); |
| |
| case SCG_DDR_CLK: |
| return scg_ddr_get_rate(); |
| |
| case SCG_NIC0_CLK: |
| case SCG_GPU_CLK: |
| case SCG_NIC1_CLK: |
| case SCG_NIC1_BUS_CLK: |
| case SCG_NIC1_EXT_CLK: |
| return scg_nic_get_rate(clk); |
| |
| case USB_PLL_OUT: |
| return decode_pll(PLL_USB); |
| |
| case MIPI_PLL_OUT: |
| return decode_pll(PLL_MIPI); |
| |
| case SCG_SOSC_CLK: |
| case SCG_FIRC_CLK: |
| case SCG_SIRC_CLK: |
| case SCG_ROSC_CLK: |
| return scg_src_get_rate(clk); |
| default: |
| return 0; |
| } |
| } |
| |
| int scg_enable_pll_pfd(enum scg_clk clk, u32 frac) |
| { |
| u32 reg; |
| u32 shift, mask, gate, valid; |
| u32 addr; |
| |
| if (frac < 12 || frac > 35) |
| return -EINVAL; |
| |
| switch (clk) { |
| case SCG_SPLL_PFD0_CLK: |
| case SCG_APLL_PFD0_CLK: |
| gate = SCG_PLL_PFD0_GATE_MASK; |
| valid = SCG_PLL_PFD0_VALID_MASK; |
| mask = SCG_PLL_PFD0_FRAC_MASK; |
| shift = SCG_PLL_PFD0_FRAC_SHIFT; |
| |
| if (clk == SCG_SPLL_PFD0_CLK) |
| addr = (u32)(&scg1_regs->spllpfd); |
| else |
| addr = (u32)(&scg1_regs->apllpfd); |
| break; |
| case SCG_SPLL_PFD1_CLK: |
| case SCG_APLL_PFD1_CLK: |
| gate = SCG_PLL_PFD1_GATE_MASK; |
| valid = SCG_PLL_PFD1_VALID_MASK; |
| mask = SCG_PLL_PFD1_FRAC_MASK; |
| shift = SCG_PLL_PFD1_FRAC_SHIFT; |
| |
| if (clk == SCG_SPLL_PFD1_CLK) |
| addr = (u32)(&scg1_regs->spllpfd); |
| else |
| addr = (u32)(&scg1_regs->apllpfd); |
| break; |
| case SCG_SPLL_PFD2_CLK: |
| case SCG_APLL_PFD2_CLK: |
| gate = SCG_PLL_PFD2_GATE_MASK; |
| valid = SCG_PLL_PFD2_VALID_MASK; |
| mask = SCG_PLL_PFD2_FRAC_MASK; |
| shift = SCG_PLL_PFD2_FRAC_SHIFT; |
| |
| if (clk == SCG_SPLL_PFD2_CLK) |
| addr = (u32)(&scg1_regs->spllpfd); |
| else |
| addr = (u32)(&scg1_regs->apllpfd); |
| break; |
| case SCG_SPLL_PFD3_CLK: |
| case SCG_APLL_PFD3_CLK: |
| gate = SCG_PLL_PFD3_GATE_MASK; |
| valid = SCG_PLL_PFD3_VALID_MASK; |
| mask = SCG_PLL_PFD3_FRAC_MASK; |
| shift = SCG_PLL_PFD3_FRAC_SHIFT; |
| |
| if (clk == SCG_SPLL_PFD3_CLK) |
| addr = (u32)(&scg1_regs->spllpfd); |
| else |
| addr = (u32)(&scg1_regs->apllpfd); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Gate the PFD */ |
| reg = readl(addr); |
| reg |= gate; |
| writel(reg, addr); |
| |
| /* Write Frac divider */ |
| reg &= ~mask; |
| reg |= (frac << shift) & mask; |
| writel(reg, addr); |
| |
| /* |
| * Un-gate the PFD |
| * (Need un-gate before checking valid, not align with RM) |
| */ |
| reg &= ~gate; |
| writel(reg, addr); |
| |
| /* Wait for PFD clock being valid */ |
| do { |
| reg = readl(addr); |
| } while (!(reg & valid)); |
| |
| return 0; |
| } |
| |
| #define SIM_MISC_CTRL0_USB_PLL_EN_MASK (0x1 << 2) |
| int scg_enable_usb_pll(bool usb_control) |
| { |
| u32 sosc_rate; |
| s32 timeout = 1000000; |
| u32 reg; |
| |
| struct usbphy_regs *usbphy = |
| (struct usbphy_regs *)USBPHY_RBASE; |
| |
| sosc_rate = scg_src_get_rate(SCG_SOSC_CLK); |
| if (!sosc_rate) |
| return -EPERM; |
| |
| reg = readl(SIM0_RBASE + 0x3C); |
| if (usb_control) |
| reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK; |
| else |
| reg |= SIM_MISC_CTRL0_USB_PLL_EN_MASK; |
| writel(reg, SIM0_RBASE + 0x3C); |
| |
| if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) { |
| writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr); |
| |
| switch (sosc_rate) { |
| case 24000000: |
| writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set); |
| break; |
| |
| case 30000000: |
| writel(0x800000, &usbphy->usb1_pll_480_ctrl_set); |
| break; |
| |
| case 19200000: |
| writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set); |
| break; |
| |
| default: |
| writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set); |
| break; |
| } |
| |
| /* Enable the regulator first */ |
| writel(PLL_USB_REG_ENABLE_MASK, |
| &usbphy->usb1_pll_480_ctrl_set); |
| |
| /* Wait at least 15us */ |
| udelay(15); |
| |
| /* Enable the power */ |
| writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set); |
| |
| /* Wait lock */ |
| while (timeout--) { |
| if (readl(&usbphy->usb1_pll_480_ctrl) & |
| PLL_USB_LOCK_MASK) |
| break; |
| } |
| |
| if (timeout <= 0) { |
| /* If timeout, we power down the pll */ |
| writel(PLL_USB_PWR_MASK, |
| &usbphy->usb1_pll_480_ctrl_clr); |
| return -ETIME; |
| } |
| } |
| |
| /* Clear the bypass */ |
| writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr); |
| |
| /* Enable the PLL clock out to USB */ |
| writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK), |
| &usbphy->usb1_pll_480_ctrl_set); |
| |
| if (!usb_control) { |
| while (timeout--) { |
| if (readl(&scg1_regs->upllcsr) & |
| SCG_UPLL_CSR_UPLLVLD_MASK) |
| break; |
| } |
| |
| if (timeout <= 0) { |
| reg = readl(SIM0_RBASE + 0x3C); |
| reg &= ~SIM_MISC_CTRL0_USB_PLL_EN_MASK; |
| writel(reg, SIM0_RBASE + 0x3C); |
| return -ETIME; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| /* A7 domain system clock source is SPLL */ |
| #define SCG1_RCCR_SCS_NUM ((SCG_SCS_SYS_PLL) << SCG_CCR_SCS_SHIFT) |
| |
| /* A7 Core clck = SPLL PFD0 / 1 = 500MHz / 1 = 500MHz */ |
| #define SCG1_RCCR_DIVCORE_NUM ((0x0) << SCG_CCR_DIVCORE_SHIFT) |
| #define SCG1_RCCR_CFG_MASK (SCG_CCR_SCS_MASK | SCG_CCR_DIVBUS_MASK) |
| |
| /* A7 Plat clck = A7 Core Clock / 2 = 250MHz / 1 = 250MHz */ |
| #define SCG1_RCCR_DIVBUS_NUM ((0x1) << SCG_CCR_DIVBUS_SHIFT) |
| #define SCG1_RCCR_CFG_NUM (SCG1_RCCR_SCS_NUM | SCG1_RCCR_DIVBUS_NUM) |
| |
| void scg_a7_rccr_init(void) |
| { |
| u32 rccr_reg_val = 0; |
| |
| rccr_reg_val = readl(&scg1_regs->rccr); |
| |
| rccr_reg_val &= (~SCG1_RCCR_CFG_MASK); |
| rccr_reg_val |= (SCG1_RCCR_CFG_NUM); |
| |
| writel(rccr_reg_val, &scg1_regs->rccr); |
| } |
| |
| /* POSTDIV2 = 1 */ |
| #define SCG1_SPLL_CFG_POSTDIV2_NUM ((0x0) << SCG_PLL_CFG_POSTDIV2_SHIFT) |
| /* POSTDIV1 = 1 */ |
| #define SCG1_SPLL_CFG_POSTDIV1_NUM ((0x0) << SCG_PLL_CFG_POSTDIV1_SHIFT) |
| |
| /* MULT = 22 */ |
| #define SCG1_SPLL_CFG_MULT_NUM ((22) << SCG_PLL_CFG_MULT_SHIFT) |
| |
| /* PFD0 output clock selected */ |
| #define SCG1_SPLL_CFG_PFDSEL_NUM ((0) << SCG_PLL_CFG_PFDSEL_SHIFT) |
| /* PREDIV = 1 */ |
| #define SCG1_SPLL_CFG_PREDIV_NUM ((0x0) << SCG_PLL_CFG_PREDIV_SHIFT) |
| /* SPLL output clocks (including PFD outputs) selected */ |
| #define SCG1_SPLL_CFG_BYPASS_NUM ((0x0) << SCG_PLL_CFG_BYPASS_SHIFT) |
| /* SPLL PFD output clock selected */ |
| #define SCG1_SPLL_CFG_PLLSEL_NUM ((0x1) << SCG_PLL_CFG_PLLSEL_SHIFT) |
| /* Clock source is System OSC */ |
| #define SCG1_SPLL_CFG_CLKSRC_NUM ((0x0) << SCG_PLL_CFG_CLKSRC_SHIFT) |
| #define SCG1_SPLL_CFG_NUM_24M_OSC (SCG1_SPLL_CFG_POSTDIV2_NUM | \ |
| SCG1_SPLL_CFG_POSTDIV1_NUM | \ |
| (22 << SCG_PLL_CFG_MULT_SHIFT) | \ |
| SCG1_SPLL_CFG_PFDSEL_NUM | \ |
| SCG1_SPLL_CFG_PREDIV_NUM | \ |
| SCG1_SPLL_CFG_BYPASS_NUM | \ |
| SCG1_SPLL_CFG_PLLSEL_NUM | \ |
| SCG1_SPLL_CFG_CLKSRC_NUM) |
| /*413Mhz = A7 SPLL(528MHz) * 18/23 */ |
| #define SCG1_SPLL_PFD0_FRAC_NUM ((23) << SCG_PLL_PFD0_FRAC_SHIFT) |
| |
| void scg_a7_spll_init(void) |
| { |
| u32 val = 0; |
| |
| /* Disable A7 System PLL */ |
| val = readl(&scg1_regs->spllcsr); |
| val &= ~SCG_SPLL_CSR_SPLLEN_MASK; |
| writel(val, &scg1_regs->spllcsr); |
| |
| /* |
| * Per block guide, |
| * "When changing PFD values, it is recommneded PFDx clock |
| * gets gated first by writing a value of 1 to PFDx_CLKGATE register, |
| * then program the new PFD value, then poll the PFDx_VALID |
| * flag to set before writing a value of 0 to PFDx_CLKGATE |
| * to ungate the PFDx clock and allow PFDx clock to run" |
| */ |
| |
| /* Gate off A7 SPLL PFD0 ~ PDF4 */ |
| val = readl(&scg1_regs->spllpfd); |
| val |= (SCG_PLL_PFD3_GATE_MASK | |
| SCG_PLL_PFD2_GATE_MASK | |
| SCG_PLL_PFD1_GATE_MASK | |
| SCG_PLL_PFD0_GATE_MASK); |
| writel(val, &scg1_regs->spllpfd); |
| |
| /* ================ A7 SPLL Configuration Start ============== */ |
| |
| /* Configure A7 System PLL */ |
| writel(SCG1_SPLL_CFG_NUM_24M_OSC, &scg1_regs->spllcfg); |
| |
| /* Enable A7 System PLL */ |
| val = readl(&scg1_regs->spllcsr); |
| val |= SCG_SPLL_CSR_SPLLEN_MASK; |
| writel(val, &scg1_regs->spllcsr); |
| |
| /* Wait for A7 SPLL clock ready */ |
| while (!(readl(&scg1_regs->spllcsr) & SCG_SPLL_CSR_SPLLVLD_MASK)) |
| ; |
| |
| /* Configure A7 SPLL PFD0 */ |
| val = readl(&scg1_regs->spllpfd); |
| val &= ~SCG_PLL_PFD0_FRAC_MASK; |
| val |= SCG1_SPLL_PFD0_FRAC_NUM; |
| writel(val, &scg1_regs->spllpfd); |
| |
| /* Un-gate A7 SPLL PFD0 */ |
| val = readl(&scg1_regs->spllpfd); |
| val &= ~SCG_PLL_PFD0_GATE_MASK; |
| writel(val, &scg1_regs->spllpfd); |
| |
| /* Wait for A7 SPLL PFD0 clock being valid */ |
| while (!(readl(&scg1_regs->spllpfd) & SCG_PLL_PFD0_VALID_MASK)) |
| ; |
| |
| /* ================ A7 SPLL Configuration End ============== */ |
| } |
| |
| /* DDR clock source is APLL PFD0 (396MHz) */ |
| #define SCG1_DDRCCR_DDRCS_NUM ((0x0) << SCG_DDRCCR_DDRCS_SHIFT) |
| /* DDR clock = APLL PFD0 / 1 = 396MHz / 1 = 396MHz */ |
| #define SCG1_DDRCCR_DDRDIV_NUM ((0x1) << SCG_DDRCCR_DDRDIV_SHIFT) |
| /* DDR clock = APLL PFD0 / 2 = 396MHz / 2 = 198MHz */ |
| #define SCG1_DDRCCR_DDRDIV_LF_NUM ((0x2) << SCG_DDRCCR_DDRDIV_SHIFT) |
| #define SCG1_DDRCCR_CFG_NUM (SCG1_DDRCCR_DDRCS_NUM | \ |
| SCG1_DDRCCR_DDRDIV_NUM) |
| #define SCG1_DDRCCR_CFG_LF_NUM (SCG1_DDRCCR_DDRCS_NUM | \ |
| SCG1_DDRCCR_DDRDIV_LF_NUM) |
| void scg_a7_ddrclk_init(void) |
| { |
| writel(SCG1_DDRCCR_CFG_NUM, &scg1_regs->ddrccr); |
| } |
| |
| /* SCG1(A7) APLLCFG configurations */ |
| /* divide by 1 <<28 */ |
| #define SCG1_APLL_CFG_POSTDIV2_NUM ((0x0) << SCG_PLL_CFG_POSTDIV2_SHIFT) |
| /* divide by 1 <<24 */ |
| #define SCG1_APLL_CFG_POSTDIV1_NUM ((0x0) << SCG_PLL_CFG_POSTDIV1_SHIFT) |
| /* MULT is 22 <<16 */ |
| #define SCG1_APLL_CFG_MULT_NUM ((22) << SCG_PLL_CFG_MULT_SHIFT) |
| /* PFD0 output clock selected <<14 */ |
| #define SCG1_APLL_CFG_PFDSEL_NUM ((0) << SCG_PLL_CFG_PFDSEL_SHIFT) |
| /* PREDIV = 1 <<8 */ |
| #define SCG1_APLL_CFG_PREDIV_NUM ((0x0) << SCG_PLL_CFG_PREDIV_SHIFT) |
| /* APLL output clocks (including PFD outputs) selected <<2 */ |
| #define SCG1_APLL_CFG_BYPASS_NUM ((0x0) << SCG_PLL_CFG_BYPASS_SHIFT) |
| /* APLL PFD output clock selected <<1 */ |
| #define SCG1_APLL_CFG_PLLSEL_NUM ((0x0) << SCG_PLL_CFG_PLLSEL_SHIFT) |
| /* Clock source is System OSC <<0 */ |
| #define SCG1_APLL_CFG_CLKSRC_NUM ((0x0) << SCG_PLL_CFG_CLKSRC_SHIFT) |
| |
| /* |
| * A7 APLL = 24MHz / 1 * 22 / 1 / 1 = 528MHz, |
| * system PLL is sourced from APLL, |
| * APLL clock source is system OSC (24MHz) |
| */ |
| #define SCG1_APLL_CFG_NUM_24M_OSC (SCG1_APLL_CFG_POSTDIV2_NUM | \ |
| SCG1_APLL_CFG_POSTDIV1_NUM | \ |
| (22 << SCG_PLL_CFG_MULT_SHIFT) | \ |
| SCG1_APLL_CFG_PFDSEL_NUM | \ |
| SCG1_APLL_CFG_PREDIV_NUM | \ |
| SCG1_APLL_CFG_BYPASS_NUM | \ |
| SCG1_APLL_CFG_PLLSEL_NUM | \ |
| SCG1_APLL_CFG_CLKSRC_NUM) |
| |
| /* PFD0 Freq = A7 APLL(528MHz) * 18 / 27 = 352MHz */ |
| #define SCG1_APLL_PFD0_FRAC_NUM (27) |
| |
| |
| void scg_a7_apll_init(void) |
| { |
| u32 val = 0; |
| |
| /* Disable A7 Auxiliary PLL */ |
| val = readl(&scg1_regs->apllcsr); |
| val &= ~SCG_APLL_CSR_APLLEN_MASK; |
| writel(val, &scg1_regs->apllcsr); |
| |
| /* Gate off A7 APLL PFD0 ~ PDF4 */ |
| val = readl(&scg1_regs->apllpfd); |
| val |= 0x80808080; |
| writel(val, &scg1_regs->apllpfd); |
| |
| /* ================ A7 APLL Configuration Start ============== */ |
| /* Configure A7 Auxiliary PLL */ |
| writel(SCG1_APLL_CFG_NUM_24M_OSC, &scg1_regs->apllcfg); |
| |
| /* Enable A7 Auxiliary PLL */ |
| val = readl(&scg1_regs->apllcsr); |
| val |= SCG_APLL_CSR_APLLEN_MASK; |
| writel(val, &scg1_regs->apllcsr); |
| |
| /* Wait for A7 APLL clock ready */ |
| while (!(readl(&scg1_regs->apllcsr) & SCG_APLL_CSR_APLLVLD_MASK)) |
| ; |
| |
| /* Configure A7 APLL PFD0 */ |
| val = readl(&scg1_regs->apllpfd); |
| val &= ~SCG_PLL_PFD0_FRAC_MASK; |
| val |= SCG1_APLL_PFD0_FRAC_NUM; |
| writel(val, &scg1_regs->apllpfd); |
| |
| /* Un-gate A7 APLL PFD0 */ |
| val = readl(&scg1_regs->apllpfd); |
| val &= ~SCG_PLL_PFD0_GATE_MASK; |
| writel(val, &scg1_regs->apllpfd); |
| |
| /* Wait for A7 APLL PFD0 clock being valid */ |
| while (!(readl(&scg1_regs->apllpfd) & SCG_PLL_PFD0_VALID_MASK)) |
| ; |
| } |
| |
| /* SCG1(A7) FIRC DIV configurations */ |
| /* Disable FIRC DIV3 */ |
| #define SCG1_FIRCDIV_DIV3_NUM ((0x0) << SCG_FIRCDIV_DIV3_SHIFT) |
| /* FIRC DIV2 = 48MHz / 1 = 48MHz */ |
| #define SCG1_FIRCDIV_DIV2_NUM ((0x1) << SCG_FIRCDIV_DIV2_SHIFT) |
| /* Disable FIRC DIV1 */ |
| #define SCG1_FIRCDIV_DIV1_NUM ((0x0) << SCG_FIRCDIV_DIV1_SHIFT) |
| |
| void scg_a7_firc_init(void) |
| { |
| /* Wait for FIRC clock ready */ |
| while (!(readl(&scg1_regs->firccsr) & SCG_FIRC_CSR_FIRCVLD_MASK)) |
| ; |
| |
| /* Configure A7 FIRC DIV1 ~ DIV3 */ |
| writel((SCG1_FIRCDIV_DIV3_NUM | |
| SCG1_FIRCDIV_DIV2_NUM | |
| SCG1_FIRCDIV_DIV1_NUM), &scg1_regs->fircdiv); |
| } |
| |
| /* SCG1(A7) NICCCR configurations */ |
| /* NIC clock source is DDR clock (396/198MHz) */ |
| #define SCG1_NICCCR_NICCS_NUM ((0x1) << SCG_NICCCR_NICCS_SHIFT) |
| |
| /* NIC0 clock = DDR Clock / 2 = 396MHz / 2 = 198MHz */ |
| #define SCG1_NICCCR_NIC0_DIV_NUM ((0x1) << SCG_NICCCR_NIC0_DIV_SHIFT) |
| /* NIC0 clock = DDR Clock / 1 = 198MHz / 1 = 198MHz */ |
| #define SCG1_NICCCR_NIC0_DIV_LF_NUM ((0x0) << SCG_NICCCR_NIC0_DIV_SHIFT) |
| /* NIC1 clock = NIC0 Clock / 1 = 198MHz / 2 = 198MHz */ |
| #define SCG1_NICCCR_NIC1_DIV_NUM ((0x0) << SCG_NICCCR_NIC1_DIV_SHIFT) |
| /* NIC1 bus clock = NIC1 Clock / 3 = 198MHz / 3 = 66MHz */ |
| #define SCG1_NICCCR_NIC1_DIVBUS_NUM ((0x2) << SCG_NICCCR_NIC1_DIVBUS_SHIFT) |
| #define SCG1_NICCCR_CFG_NUM (SCG1_NICCCR_NICCS_NUM | \ |
| SCG1_NICCCR_NIC0_DIV_NUM | \ |
| SCG1_NICCCR_NIC1_DIV_NUM | \ |
| SCG1_NICCCR_NIC1_DIVBUS_NUM) |
| |
| void scg_a7_nicclk_init(void) |
| { |
| writel(SCG1_NICCCR_CFG_NUM, &scg1_regs->nicccr); |
| } |
| |
| /* SCG1(A7) FIRC DIV configurations */ |
| /* Enable FIRC DIV3 */ |
| #define SCG1_SOSCDIV_DIV3_NUM ((0x1) << SCG_SOSCDIV_DIV3_SHIFT) |
| /* FIRC DIV2 = 48MHz / 1 = 48MHz */ |
| #define SCG1_SOSCDIV_DIV2_NUM ((0x1) << SCG_SOSCDIV_DIV2_SHIFT) |
| /* Enable FIRC DIV1 */ |
| #define SCG1_SOSCDIV_DIV1_NUM ((0x1) << SCG_SOSCDIV_DIV1_SHIFT) |
| |
| void scg_a7_soscdiv_init(void) |
| { |
| /* Wait for FIRC clock ready */ |
| while (!(readl(&scg1_regs->sosccsr) & SCG_SOSC_CSR_SOSCVLD_MASK)) |
| ; |
| |
| /* Configure A7 FIRC DIV1 ~ DIV3 */ |
| writel((SCG1_SOSCDIV_DIV3_NUM | SCG1_SOSCDIV_DIV2_NUM | |
| SCG1_SOSCDIV_DIV1_NUM), &scg1_regs->soscdiv); |
| } |
| |
| void scg_a7_sys_clk_sel(enum scg_sys_src clk) |
| { |
| u32 rccr_reg_val = 0; |
| |
| clk_debug("%s: system clock selected as %s\n", "[SCG]", |
| clk == SCG_SCS_SYS_OSC ? "SYS_OSC" : |
| clk == SCG_SCS_SLOW_IRC ? "SLOW_IRC" : |
| clk == SCG_SCS_FAST_IRC ? "FAST_IRC" : |
| clk == SCG_SCS_RTC_OSC ? "RTC_OSC" : |
| clk == SCG_SCS_AUX_PLL ? "AUX_PLL" : |
| clk == SCG_SCS_SYS_PLL ? "SYS_PLL" : |
| clk == SCG_SCS_USBPHY_PLL ? "USBPHY_PLL" : |
| "Invalid source" |
| ); |
| |
| rccr_reg_val = readl(&scg1_regs->rccr); |
| rccr_reg_val &= ~SCG_CCR_SCS_MASK; |
| rccr_reg_val |= (clk << SCG_CCR_SCS_SHIFT); |
| writel(rccr_reg_val, &scg1_regs->rccr); |
| } |
| |
| void scg_a7_info(void) |
| { |
| debug("SCG Version: 0x%x\n", readl(&scg1_regs->verid)); |
| debug("SCG Parameter: 0x%x\n", readl(&scg1_regs->param)); |
| debug("SCG RCCR Value: 0x%x\n", readl(&scg1_regs->rccr)); |
| debug("SCG Clock Status: 0x%x\n", readl(&scg1_regs->csr)); |
| } |