| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Xilinx ZynqMP ZCU1285 RevA |
| * |
| * (C) Copyright 2018 - 2020, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@xilinx.com> |
| * Siva Durga Prasad Paladugu <sivadur@xilinx.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| |
| / { |
| model = "ZynqMP ZCU1285 RevA"; |
| compatible = "xlnx,zynqmp-zcu1285-revA", "xlnx,zynqmp-zcu1285", |
| "xlnx,zynqmp"; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &dcc; |
| spi0 = &qspi; |
| mmc0 = &sdhci1; |
| i2c = &i2c0; /* EMIO */ |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| ina226-u60 { |
| compatible = "iio-hwmon"; |
| io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; |
| }; |
| ina226-u61 { |
| compatible = "iio-hwmon"; |
| io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; |
| }; |
| ina226-u63 { |
| compatible = "iio-hwmon"; |
| io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; |
| }; |
| ina226-u65 { |
| compatible = "iio-hwmon"; |
| io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; |
| }; |
| ina226-u64 { |
| compatible = "iio-hwmon"; |
| io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; |
| }; |
| }; |
| |
| &dcc { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| i2c-mux@75 { |
| compatible = "nxp,pca9548"; /* u22 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x75>; |
| |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* PMBUS */ |
| max20751@74 { /* u23 */ |
| compatible = "maxim,max20751"; |
| reg = <0x74>; |
| }; |
| max20751@70 { /* u89 */ |
| compatible = "maxim,max20751"; |
| reg = <0x70>; |
| }; |
| max15301@a { /* u28 */ |
| compatible = "maxim,max15301"; |
| reg = <0xa>; |
| }; |
| max15303@b { /* u48 */ |
| compatible = "maxim,max15303"; |
| reg = <0xb>; |
| }; |
| max15303@d { /* u27 */ |
| compatible = "maxim,max15303"; |
| reg = <0xd>; |
| }; |
| max15303@e { /* u11 */ |
| compatible = "maxim,max15303"; |
| reg = <0xe>; |
| }; |
| max15303@f { /* u96 */ |
| compatible = "maxim,max15303"; |
| reg = <0xf>; |
| }; |
| max15303@11 { /* u47 */ |
| compatible = "maxim,max15303"; |
| reg = <0x11>; |
| }; |
| max15303@12 { /* u24 */ |
| compatible = "maxim,max15303"; |
| reg = <0x12>; |
| }; |
| max15301@13 { /* u29 */ |
| compatible = "maxim,max15301"; |
| reg = <0x13>; |
| }; |
| max15303@14 { /* u51 */ |
| compatible = "maxim,max15303"; |
| reg = <0x14>; |
| }; |
| max15303@15 { /* u30 */ |
| compatible = "maxim,max15303"; |
| reg = <0x15>; |
| }; |
| max15303@16 { /* u102 */ |
| compatible = "maxim,max15303"; |
| reg = <0x16>; |
| }; |
| max15301@17 { /* u50 */ |
| compatible = "maxim,max15301"; |
| reg = <0x17>; |
| }; |
| max15301@18 { /* u31 */ |
| compatible = "maxim,max15301"; |
| reg = <0x18>; |
| }; |
| }; |
| i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| /* CM_I2C */ |
| }; |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| /* SYS_EEPROM */ |
| eeprom: eeprom@54 { /* u101 */ |
| compatible = "atmel,24c32"; /* 24LC32A */ |
| reg = <0x54>; |
| }; |
| }; |
| i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| /* FMC1 */ |
| }; |
| i2c@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| /* FMC2 */ |
| }; |
| i2c@5 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| /* ANALOG_PMBUS */ |
| u60: ina226@40 { /* u60 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-u60"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| u61: ina226@41 { /* u61 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-u61"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| u63: ina226@42 { /* u63 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-u63"; |
| reg = <0x42>; |
| shunt-resistor = <1000>; |
| }; |
| u65: ina226@43 { /* u65 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-u65"; |
| reg = <0x43>; |
| shunt-resistor = <1000>; |
| }; |
| u64: ina226@44 { /* u64 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-u64"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| }; |
| i2c@6 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| /* ANALOG_CM_I2C */ |
| }; |
| i2c@7 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <7>; |
| /* FMC3 */ |
| }; |
| }; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| flash@0 { |
| compatible = "m25p80", "jedec,spi-nor"; /* 32MB */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x0>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| spi-max-frequency = <108000000>; /* Based on DC1 spec */ |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &sdhci1 { |
| status = "okay"; |
| /* |
| * This property should be removed for supporting UHS mode |
| */ |
| no-1-8-v; |
| xlnx,mio-bank = <1>; |
| }; |