blob: d29ea700b2ea74c7b9a39fb59e6e88475f8e7929 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* (C) Copyright 2010,2012
* NVIDIA Corporation <www.nvidia.com>
*
* (C) Copyright 2022
* Svyatoslav Ryhel <clamor95@gmail.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/sizes.h>
#include "tegra30-common.h"
#define CFG_TEGRA_BOARD_STRING "LG X3 Board"
#ifdef CONFIG_DEVICE_P880
/* High-level configuration options */
#undef CFG_TEGRA_BOARD_STRING
#define CFG_TEGRA_BOARD_STRING "LG Optimus 4X HD"
#endif
#ifdef CONFIG_DEVICE_P895
/* High-level configuration options */
#undef CFG_TEGRA_BOARD_STRING
#define CFG_TEGRA_BOARD_STRING "LG Optimus Vu"
#endif
#define X3_FLASH_UBOOT \
"flash_uboot=echo Preparing RAM;" \
"mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
"mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
"echo Reading BCT;" \
"mmc dev 0 1;" \
"mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
"echo Reading bootloader;" \
"if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
"then echo Calculating bootloader size;" \
"size mmc 0:1 ${bootloader_file};" \
"ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
"echo Writing bootloader to eMMC;" \
"mmc dev 0 1;" \
"mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
"mmc dev 0 2;" \
"mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
"echo Bootloader written successfully;" \
"pause 'Press ANY key to reboot device...'; reset;" \
"else echo Reading bootloader failed;" \
"pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
#define X3_BOOTMENU \
X3_FLASH_UBOOT \
"bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
"bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
"bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
"bootmenu_3=update bootloader=run flash_uboot\0" \
"bootmenu_4=reboot RCM=enterrcm\0" \
"bootmenu_5=reboot=reset\0" \
"bootmenu_6=power off=poweroff\0" \
"bootmenu_delay=-1\0"
#define BOARD_EXTRA_ENV_SETTINGS \
"boot_block_size_r=0x200000\0" \
"boot_block_size=0x1000\0" \
"bootloader_file=u-boot-dtb-tegra.bin\0" \
"check_button=gpio input 116; test $? -eq 0\0" \
"partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
X3_BOOTMENU
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#include "tegra-common-post.h"
#endif /* __CONFIG_H */