| /* |
| * (C) Copyright 2007 Czech Technical University. |
| * |
| * Michal SIMEK <monstr@monstr.eu> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include "../board/xilinx/xupv2p/xparameters.h" |
| |
| #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ |
| #define CONFIG_XUPV2P 1 |
| |
| /* uart */ |
| #define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR |
| #define CONFIG_BAUDRATE XILINX_UART_BAUDRATE |
| #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } |
| |
| /* ethernet */ |
| #define CONFIG_EMAC 1 |
| #define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES |
| |
| /* |
| * setting reset address |
| * |
| * TEXT_BASE is set to place, where the U-BOOT run in RAM, but |
| * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS |
| * to FLASH memory and after loading bitstream jump to FLASH. |
| * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze |
| * jump to CFG_RESET_ADDRESS where is the original U-BOOT code. |
| */ |
| #define CFG_RESET_ADDRESS 0x36000000 |
| |
| /* gpio */ |
| #define CFG_GPIO_0 1 |
| #define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR |
| |
| /* interrupt controller */ |
| #define CFG_INTC_0 1 |
| #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR |
| #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS |
| |
| /* timer */ |
| #define CFG_TIMER_0 1 |
| #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR |
| #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ |
| #define FREQUENCE XILINX_CLOCK_FREQ |
| #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) |
| |
| /* |
| * memory layout - Example |
| * TEXT_BASE = 0x3600_0000; |
| * CFG_SRAM_BASE = 0x3000_0000; |
| * CFG_SRAM_SIZE = 0x1000_0000; |
| * |
| * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000 |
| * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000 |
| * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000 |
| * |
| * 0x3000_0000 CFG_SDRAM_BASE |
| * FREE |
| * 0x3600_0000 TEXT_BASE |
| * U-BOOT code |
| * 0x3602_0000 |
| * FREE |
| * |
| * STACK |
| * 0x3FF7_F000 CFG_MALLOC_BASE |
| * MALLOC_AREA 256kB Alloc |
| * 0x3FFB_F000 CFG_MONITOR_BASE |
| * MONITOR_CODE 256kB Env |
| * 0x3FFF_F000 CFG_GBL_DATA_OFFSET |
| * GLOBAL_DATA 4kB bd, gd |
| * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE |
| */ |
| |
| /* ddr sdram - main memory */ |
| #define CFG_SDRAM_BASE XILINX_RAM_START |
| #define CFG_SDRAM_SIZE XILINX_RAM_SIZE |
| #define CFG_MEMTEST_START CFG_SDRAM_BASE |
| #define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000) |
| |
| /* global pointer */ |
| #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ |
| #define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ |
| |
| /* monitor code */ |
| #define SIZE 0x40000 |
| #define CFG_MONITOR_LEN SIZE |
| #define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN) |
| #define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| #define CFG_MALLOC_LEN SIZE |
| #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) |
| |
| /* stack */ |
| #define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE |
| |
| #define CFG_NO_FLASH 1 |
| #define CFG_ENV_IS_NOWHERE 1 |
| #define CFG_ENV_SIZE 0x1000 |
| #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) |
| #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ |
| CFG_CMD_MEMORY |\ |
| CFG_CMD_IRQ |\ |
| CFG_CMD_BDI |\ |
| CFG_CMD_NET |\ |
| CFG_CMD_IMI |\ |
| CFG_CMD_ECHO |\ |
| CFG_CMD_CACHE |\ |
| CFG_CMD_RUN |\ |
| CFG_CMD_AUTOSCRIPT |\ |
| CFG_CMD_ASKENV |\ |
| CFG_CMD_LOADS |\ |
| CFG_CMD_LOADB |\ |
| CFG_CMD_MISC |\ |
| CFG_CMD_PING \ |
| ) |
| |
| /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
| #include <cmd_confdefs.h> |
| |
| /* Miscellaneous configurable options */ |
| #define CFG_PROMPT "U-Boot-mONStR> " |
| #define CFG_CBSIZE 512 /* size of console buffer */ |
| #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */ |
| #define CFG_MAXARGS 15 /* max number of command args */ |
| #define CFG_LONGHELP |
| #define CFG_LOAD_ADDR 0x12000000 /* default load address */ |
| |
| #define CONFIG_BOOTDELAY 30 |
| #define CONFIG_BOOTARGS "root=romfs" |
| #define CONFIG_HOSTNAME "ml401" |
| #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" |
| #define CONFIG_IPADDR 192.168.0.3 |
| #define CONFIG_SERVERIP 192.168.0.5 |
| #define CONFIG_GATEWAYIP 192.168.0.1 |
| #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
| |
| /* architecture dependent code */ |
| #define CFG_USR_EXCEP /* user exception */ |
| #define CFG_HZ 1000 |
| |
| #define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \ |
| "base 0;" \ |
| "echo" |
| |
| |
| /* system ace */ |
| /*#define CONFIG_SYSTEMACE |
| #define DEBUG_SYSTEMACE |
| #define CFG_SYSTEMACE_BASE 0xCF000000 |
| #define CFG_SYSTEMACE_WIDTH 16 |
| #define CONFIG_DOS_PARTITION*/ |
| |
| #endif /* __CONFIG_H */ |