include/fsl_nfc.h - platform/external/u-boot - Gitiles

 /*
  * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __FSL_NFC_H
 #define __FSL_NFC_H

 /*
  * Register map and bit definitions for the Freescale NAND Flash Controller
  * present in various i.MX devices.
  *
  * MX31 and MX27 have version 1, which has:
  *	4 512-byte main buffers and
  *	4 16-byte spare buffers
  *	to support up to 2K byte pagesize nand.
  *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
  *
  * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
  * have:
  *	8 512-byte main buffers and
  *	8 64-byte spare buffers
  *	to support up to 4K byte pagesize nand.
  *	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
  *	Also some of registers are moved and/or changed meaning as seen below.
  */
 #if defined(CONFIG_MX27) || defined(CONFIG_MX31)
 #define MXC_NFC_V1
 #define is_mxc_nfc_1()		1
 #define is_mxc_nfc_21()		0
 #define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
 #define MXC_NFC_V2_1
 #define is_mxc_nfc_1()		0
 #define is_mxc_nfc_21()		1
 #define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #define MXC_NFC_V3
 #define MXC_NFC_V3_2
 #define is_mxc_nfc_1()		0
 #define is_mxc_nfc_21()		0
 #define is_mxc_nfc_32()		1
 #else
 #error "MXC NFC implementation not supported"
 #endif
 #define is_mxc_nfc_3()		is_mxc_nfc_32()

 #if defined(MXC_NFC_V1)
 #define NAND_MXC_NR_BUFS		4
 #define NAND_MXC_SPARE_BUF_SIZE		16
 #define NAND_MXC_REG_OFFSET		0xe00
 #define NAND_MXC_2K_MULTI_CYCLE
 #elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 #define NAND_MXC_NR_BUFS		8
 #define NAND_MXC_SPARE_BUF_SIZE		64
 #define NAND_MXC_REG_OFFSET		0x1e00
 #endif

 struct fsl_nfc_regs {
 	u8 main_area[NAND_MXC_NR_BUFS][0x200];
 	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
 	/*
 	 * reserved size is offset of nfc registers
 	 * minus total main and spare sizes
 	 */
 	u8 reserved1[NAND_MXC_REG_OFFSET
 		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
 #if defined(MXC_NFC_V1)
 	u16 buf_size;
 	u16 reserved2;
 	u16 buf_addr;
 	u16 flash_addr;
 	u16 flash_cmd;
 	u16 config;
 	u16 ecc_status_result;
 	u16 rsltmain_area;
 	u16 rsltspare_area;
 	u16 wrprot;
 	u16 unlockstart_blkaddr;
 	u16 unlockend_blkaddr;
 	u16 nf_wrprst;
 	u16 config1;
 	u16 config2;
 #elif defined(MXC_NFC_V2_1)
 	u16 reserved2[2];
 	u16 buf_addr;
 	u16 flash_addr;
 	u16 flash_cmd;
 	u16 config;
 	u32 ecc_status_result;
 	u16 spare_area_size;
 	u16 wrprot;
 	u16 reserved3[2];
 	u16 nf_wrprst;
 	u16 config1;
 	u16 config2;
 	u16 reserved4;
 	u16 unlockstart_blkaddr;
 	u16 unlockend_blkaddr;
 	u16 unlockstart_blkaddr1;
 	u16 unlockend_blkaddr1;
 	u16 unlockstart_blkaddr2;
 	u16 unlockend_blkaddr2;
 	u16 unlockstart_blkaddr3;
 	u16 unlockend_blkaddr3;
 #elif defined(MXC_NFC_V3_2)
 	u32 flash_cmd;
 	u32 flash_addr[12];
 	u32 config1;
 	u32 ecc_status_result;
 	u32 status_sum;
 	u32 launch;
 #endif
 };

 #ifdef MXC_NFC_V3_2
 struct fsl_nfc_ip_regs {
 	u32 wrprot;
 	u32 wrprot_unlock_blkaddr[8];
 	u32 config2;
 	u32 config3;
 	u32 ipc;
 	u32 err_addr;
 	u32 delay_line;
 };
 #endif

 /* Set FCMD to 1, rest to 0 for Command operation */
 #define NFC_CMD				0x1

 /* Set FADD to 1, rest to 0 for Address operation */
 #define NFC_ADDR			0x2

 /* Set FDI to 1, rest to 0 for Input operation */
 #define NFC_INPUT			0x4

 /* Set FDO to 001, rest to 0 for Data Output operation */
 #define NFC_OUTPUT			0x8

 /* Set FDO to 010, rest to 0 for Read ID operation */
 #define NFC_ID				0x10

 /* Set FDO to 100, rest to 0 for Read Status operation */
 #define NFC_STATUS			0x20

 #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #define NFC_CONFIG1_SP_EN		(1 << 2)
 #define NFC_CONFIG1_RST			(1 << 6)
 #define NFC_CONFIG1_CE			(1 << 7)
 #elif defined(MXC_NFC_V3_2)
 #define NFC_CONFIG1_SP_EN		(1 << 0)
 #define NFC_CONFIG1_CE			(1 << 1)
 #define NFC_CONFIG1_RST			(1 << 2)
 #endif
 #define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
 #define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
 #define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
 #define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
 #define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
 #define NFC_V2_CONFIG1_FP_INT		(1 << 11)
 #define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
 #define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)

 #define NFC_V1_V2_CONFIG2_INT		(1 << 15)
 #define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
 #define NFC_V3_CONFIG2_PS_512		(0 << 0)
 #define NFC_V3_CONFIG2_PS_2048		(1 << 0)
 #define NFC_V3_CONFIG2_PS_4096		(2 << 0)
 #define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
 #define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
 #define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
 #define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
 #define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
 #define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
 #define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
 #define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
 #define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
 #define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
 #define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
 #define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
 #define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
 #define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
 #define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)

 #define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
 #define NFC_V3_CONFIG3_FW8		(1 << 3)
 #define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
 #define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
 #define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
 #define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)

 #define NFC_V3_WRPROT_UNLOCK		(1 << 2)
 #define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)

 #define NFC_V3_IPC_CREQ			(1 << 0)
 #define NFC_V3_IPC_INT			(1 << 31)

 #if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #define operation	config2
 #define readnfc		readw
 #define writenfc	writew
 #elif defined(MXC_NFC_V3_2)
 #define operation	launch
 #define readnfc		readl
 #define writenfc	writel
 #endif

 #endif /* __FSL_NFC_H */
	/*
	* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __FSL_NFC_H
	#define __FSL_NFC_H

	/*
	* Register map and bit definitions for the Freescale NAND Flash Controller
	* present in various i.MX devices.
	*
	* MX31 and MX27 have version 1, which has:
	* 4 512-byte main buffers and
	* 4 16-byte spare buffers
	* to support up to 2K byte pagesize nand.
	* Reading or writing a 2K page requires 4 FDI/FDO cycles.
	*
	* MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
	* have:
	* 8 512-byte main buffers and
	* 8 64-byte spare buffers
	* to support up to 4K byte pagesize nand.
	* Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
	* Also some of registers are moved and/or changed meaning as seen below.
	*/
	#if defined(CONFIG_MX27) \|\| defined(CONFIG_MX31)
	#define MXC_NFC_V1
	#define is_mxc_nfc_1() 1
	#define is_mxc_nfc_21() 0
	#define is_mxc_nfc_32() 0
	#elif defined(CONFIG_MX25) \|\| defined(CONFIG_MX35)
	#define MXC_NFC_V2_1
	#define is_mxc_nfc_1() 0
	#define is_mxc_nfc_21() 1
	#define is_mxc_nfc_32() 0
	#elif defined(CONFIG_MX51) \|\| defined(CONFIG_MX53)
	#define MXC_NFC_V3
	#define MXC_NFC_V3_2
	#define is_mxc_nfc_1() 0
	#define is_mxc_nfc_21() 0
	#define is_mxc_nfc_32() 1
	#else
	#error "MXC NFC implementation not supported"
	#endif
	#define is_mxc_nfc_3() is_mxc_nfc_32()

	#if defined(MXC_NFC_V1)
	#define NAND_MXC_NR_BUFS 4
	#define NAND_MXC_SPARE_BUF_SIZE 16
	#define NAND_MXC_REG_OFFSET 0xe00
	#define NAND_MXC_2K_MULTI_CYCLE
	#elif defined(MXC_NFC_V2_1) \|\| defined(MXC_NFC_V3_2)
	#define NAND_MXC_NR_BUFS 8
	#define NAND_MXC_SPARE_BUF_SIZE 64
	#define NAND_MXC_REG_OFFSET 0x1e00
	#endif

	struct fsl_nfc_regs {
	u8 main_area[NAND_MXC_NR_BUFS][0x200];
	u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
	/*
	* reserved size is offset of nfc registers
	* minus total main and spare sizes
	*/
	u8 reserved1[NAND_MXC_REG_OFFSET
	- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
	#if defined(MXC_NFC_V1)
	u16 buf_size;
	u16 reserved2;
	u16 buf_addr;
	u16 flash_addr;
	u16 flash_cmd;
	u16 config;
	u16 ecc_status_result;
	u16 rsltmain_area;
	u16 rsltspare_area;
	u16 wrprot;
	u16 unlockstart_blkaddr;
	u16 unlockend_blkaddr;
	u16 nf_wrprst;
	u16 config1;
	u16 config2;
	#elif defined(MXC_NFC_V2_1)
	u16 reserved2[2];
	u16 buf_addr;
	u16 flash_addr;
	u16 flash_cmd;
	u16 config;
	u32 ecc_status_result;
	u16 spare_area_size;
	u16 wrprot;
	u16 reserved3[2];
	u16 nf_wrprst;
	u16 config1;
	u16 config2;
	u16 reserved4;
	u16 unlockstart_blkaddr;
	u16 unlockend_blkaddr;
	u16 unlockstart_blkaddr1;
	u16 unlockend_blkaddr1;
	u16 unlockstart_blkaddr2;
	u16 unlockend_blkaddr2;
	u16 unlockstart_blkaddr3;
	u16 unlockend_blkaddr3;
	#elif defined(MXC_NFC_V3_2)
	u32 flash_cmd;
	u32 flash_addr[12];
	u32 config1;
	u32 ecc_status_result;
	u32 status_sum;
	u32 launch;
	#endif
	};

	#ifdef MXC_NFC_V3_2
	struct fsl_nfc_ip_regs {
	u32 wrprot;
	u32 wrprot_unlock_blkaddr[8];
	u32 config2;
	u32 config3;
	u32 ipc;
	u32 err_addr;
	u32 delay_line;
	};
	#endif

	/* Set FCMD to 1, rest to 0 for Command operation */
	#define NFC_CMD 0x1

	/* Set FADD to 1, rest to 0 for Address operation */
	#define NFC_ADDR 0x2

	/* Set FDI to 1, rest to 0 for Input operation */
	#define NFC_INPUT 0x4

	/* Set FDO to 001, rest to 0 for Data Output operation */
	#define NFC_OUTPUT 0x8

	/* Set FDO to 010, rest to 0 for Read ID operation */
	#define NFC_ID 0x10

	/* Set FDO to 100, rest to 0 for Read Status operation */
	#define NFC_STATUS 0x20

	#if defined(MXC_NFC_V1) \|\| defined(MXC_NFC_V2_1)
	#define NFC_CONFIG1_SP_EN (1 << 2)
	#define NFC_CONFIG1_RST (1 << 6)
	#define NFC_CONFIG1_CE (1 << 7)
	#elif defined(MXC_NFC_V3_2)
	#define NFC_CONFIG1_SP_EN (1 << 0)
	#define NFC_CONFIG1_CE (1 << 1)
	#define NFC_CONFIG1_RST (1 << 2)
	#endif
	#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
	#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
	#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
	#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
	#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
	#define NFC_V2_CONFIG1_FP_INT (1 << 11)
	#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4)
	#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4)

	#define NFC_V1_V2_CONFIG2_INT (1 << 15)
	#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0)
	#define NFC_V3_CONFIG2_PS_512 (0 << 0)
	#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
	#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
	#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
	#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
	#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
	#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5)
	#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
	#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7)
	#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
	#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9)
	#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9)
	#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12)
	#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
	#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16)
	#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
	#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24)
	#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)

	#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
	#define NFC_V3_CONFIG3_FW8 (1 << 3)
	#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
	#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12)
	#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
	#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)

	#define NFC_V3_WRPROT_UNLOCK (1 << 2)
	#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)

	#define NFC_V3_IPC_CREQ (1 << 0)
	#define NFC_V3_IPC_INT (1 << 31)

	#if defined(MXC_NFC_V1) \|\| defined(MXC_NFC_V2_1)
	#define operation config2
	#define readnfc readw
	#define writenfc writew
	#elif defined(MXC_NFC_V3_2)
	#define operation launch
	#define readnfc readl
	#define writenfc writel
	#endif

	#endif /* __FSL_NFC_H */