blob: db47baba6d1ae8377cbe51bafa325d4dd4f950bc [file] [log] [blame]
if ARCH_STM32MP
config SPL
select SPL_BOARD_INIT
select SPL_CLK
select SPL_DM
select SPL_DM_SEQ_ALIAS
select SPL_DRIVERS_MISC
select SPL_FRAMEWORK
select SPL_GPIO
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBGENERIC_SUPPORT
select SPL_OF_CONTROL
select SPL_OF_TRANSLATE
select SPL_PINCTRL
select SPL_REGMAP
select SPL_DM_RESET
select SPL_SERIAL
select SPL_SYSCON
select SPL_WATCHDOG if WATCHDOG
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
imply SPL_LIBDISK_SUPPORT
imply SPL_SPI_LOAD if SPL_SPI
config SYS_SOC
default "stm32mp"
config SYS_MALLOC_LEN
default 0x2000000
config ENV_SIZE
default 0x2000
choice
prompt "Select STMicroelectronics STM32MPxxx Soc"
default STM32MP15x
config STM32MP13x
bool "Support STMicroelectronics STM32MP13x Soc"
select ARM_SMCCC
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select OF_BOARD
select OF_BOARD_SETUP
select PINCTRL_STM32
select STM32_RCC
select STM32_RESET
select STM32_SERIAL
select SYS_ARCH_TIMER
imply CMD_NVEDIT_INFO
help
support of STMicroelectronics SOC STM32MP13x family
STMicroelectronics MPU with core ARMv7
config STM32MP15x
bool "Support STMicroelectronics STM32MP15x Soc"
select ARCH_SUPPORT_PSCI
select BINMAN
select CPU_V7A
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select OF_BOARD if TFABOOT
select OF_BOARD_SETUP
select PINCTRL_STM32
select STM32_RCC
select STM32_RESET
select STM32_SERIAL
select SUPPORT_SPL
select SYS_ARCH_TIMER
imply CMD_NVEDIT_INFO
help
support of STMicroelectronics SOC STM32MP15x family
STM32MP157, STM32MP153 or STM32MP151
STMicroelectronics MPU with core ARMv7
dual core A7 for STM32MP157/3, monocore for STM32MP151
endchoice
config NR_DRAM_BANKS
default 1
config DDR_CACHEABLE_SIZE
hex "Size of the DDR marked cacheable in pre-reloc stage"
default 0x40000000
help
Define the size of the DDR marked as cacheable in U-Boot
pre-reloc stage.
This option can be useful to avoid speculatif access
to secured area of DDR used by TF-A or OP-TEE before U-Boot
initialization.
The areas marked "no-map" in device tree should be located
before this limit: STM32_DDR_BASE + DDR_CACHEABLE_SIZE.
config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
hex "Partition on MMC2 to use to load U-Boot from"
depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
default 1
help
Partition on the second MMC to load U-Boot from when the MMC is being
used in raw mode
config STM32_ETZPC
bool "STM32 Extended TrustZone Protection"
depends on STM32MP15x || STM32MP13x
default y
imply BOOTP_SERVERIP
help
Say y to enable STM32 Extended TrustZone Protection
config STM32_ECDSA_VERIFY
bool "STM32 ECDSA verification via the ROM API"
depends on SPL_ECDSA_VERIFY
default y
help
Say y to enable the uclass driver for ECDSA verification using the
ROM API provided on STM32MP.
The ROM API is only available during SPL for now.
config CMD_STM32KEY
bool "command stm32key to fuse public key hash"
help
fuse public key hash in corresponding fuse used to authenticate
binary.
This command is used to evaluate the secure boot on stm32mp SOC,
it is deactivated by default in real products.
source "arch/arm/mach-stm32mp/Kconfig.13x"
source "arch/arm/mach-stm32mp/Kconfig.15x"
source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
endif