| /* |
| * I2C Driver for Atmel ATSHA204 over I2C |
| * |
| * Copyright (C) 2014 Josh Datko, Cryptotronix, jbd@cryptotronix.com |
| * 2016 Tomas Hlavacek, CZ.NIC, tmshlvck@gmail.com |
| * 2017 Marek Behun, CZ.NIC, marek.behun@nic.cz |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <errno.h> |
| #include <atsha204a-i2c.h> |
| #include <log.h> |
| #include <linux/delay.h> |
| #include <u-boot/crc.h> |
| |
| #define ATSHA204A_TWLO 60 |
| #define ATSHA204A_TRANSACTION_TIMEOUT 100000 |
| #define ATSHA204A_TRANSACTION_RETRY 5 |
| #define ATSHA204A_EXECTIME 5000 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * The ATSHA204A uses an (to me) unknown CRC-16 algorithm. |
| * The Reveng CRC-16 catalogue does not contain it. |
| * |
| * Because in Atmel's documentation only a primitive implementation |
| * can be found, I have implemented this one with lookup table. |
| */ |
| |
| /* |
| * This is the code that computes the table below: |
| * |
| * int i, j; |
| * for (i = 0; i < 256; ++i) { |
| * u8 c = 0; |
| * for (j = 0; j < 8; ++j) { |
| * c = (c << 1) | ((i >> j) & 1); |
| * } |
| * bitreverse_table[i] = c; |
| * } |
| */ |
| |
| static u8 const bitreverse_table[256] = { |
| 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, |
| 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, |
| 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, |
| 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, |
| 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, |
| 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, |
| 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, |
| 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, |
| 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, |
| 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, |
| 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, |
| 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, |
| 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, |
| 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, |
| 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, |
| 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, |
| 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, |
| 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, |
| 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, |
| 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, |
| 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, |
| 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, |
| 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, |
| 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, |
| 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, |
| 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, |
| 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, |
| 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, |
| 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, |
| 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, |
| 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, |
| 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, |
| }; |
| |
| /* |
| * This is the code that computes the table below: |
| * |
| * int i, j; |
| * for (i = 0; i < 256; ++i) { |
| * u16 c = i << 8; |
| * for (j = 0; j < 8; ++j) { |
| * int b = c >> 15; |
| * c <<= 1; |
| * if (b) |
| * c ^= 0x8005; |
| * } |
| * crc16_table[i] = c; |
| * } |
| */ |
| static u16 const crc16_table[256] = { |
| 0x0000, 0x8005, 0x800f, 0x000a, 0x801b, 0x001e, 0x0014, 0x8011, |
| 0x8033, 0x0036, 0x003c, 0x8039, 0x0028, 0x802d, 0x8027, 0x0022, |
| 0x8063, 0x0066, 0x006c, 0x8069, 0x0078, 0x807d, 0x8077, 0x0072, |
| 0x0050, 0x8055, 0x805f, 0x005a, 0x804b, 0x004e, 0x0044, 0x8041, |
| 0x80c3, 0x00c6, 0x00cc, 0x80c9, 0x00d8, 0x80dd, 0x80d7, 0x00d2, |
| 0x00f0, 0x80f5, 0x80ff, 0x00fa, 0x80eb, 0x00ee, 0x00e4, 0x80e1, |
| 0x00a0, 0x80a5, 0x80af, 0x00aa, 0x80bb, 0x00be, 0x00b4, 0x80b1, |
| 0x8093, 0x0096, 0x009c, 0x8099, 0x0088, 0x808d, 0x8087, 0x0082, |
| 0x8183, 0x0186, 0x018c, 0x8189, 0x0198, 0x819d, 0x8197, 0x0192, |
| 0x01b0, 0x81b5, 0x81bf, 0x01ba, 0x81ab, 0x01ae, 0x01a4, 0x81a1, |
| 0x01e0, 0x81e5, 0x81ef, 0x01ea, 0x81fb, 0x01fe, 0x01f4, 0x81f1, |
| 0x81d3, 0x01d6, 0x01dc, 0x81d9, 0x01c8, 0x81cd, 0x81c7, 0x01c2, |
| 0x0140, 0x8145, 0x814f, 0x014a, 0x815b, 0x015e, 0x0154, 0x8151, |
| 0x8173, 0x0176, 0x017c, 0x8179, 0x0168, 0x816d, 0x8167, 0x0162, |
| 0x8123, 0x0126, 0x012c, 0x8129, 0x0138, 0x813d, 0x8137, 0x0132, |
| 0x0110, 0x8115, 0x811f, 0x011a, 0x810b, 0x010e, 0x0104, 0x8101, |
| 0x8303, 0x0306, 0x030c, 0x8309, 0x0318, 0x831d, 0x8317, 0x0312, |
| 0x0330, 0x8335, 0x833f, 0x033a, 0x832b, 0x032e, 0x0324, 0x8321, |
| 0x0360, 0x8365, 0x836f, 0x036a, 0x837b, 0x037e, 0x0374, 0x8371, |
| 0x8353, 0x0356, 0x035c, 0x8359, 0x0348, 0x834d, 0x8347, 0x0342, |
| 0x03c0, 0x83c5, 0x83cf, 0x03ca, 0x83db, 0x03de, 0x03d4, 0x83d1, |
| 0x83f3, 0x03f6, 0x03fc, 0x83f9, 0x03e8, 0x83ed, 0x83e7, 0x03e2, |
| 0x83a3, 0x03a6, 0x03ac, 0x83a9, 0x03b8, 0x83bd, 0x83b7, 0x03b2, |
| 0x0390, 0x8395, 0x839f, 0x039a, 0x838b, 0x038e, 0x0384, 0x8381, |
| 0x0280, 0x8285, 0x828f, 0x028a, 0x829b, 0x029e, 0x0294, 0x8291, |
| 0x82b3, 0x02b6, 0x02bc, 0x82b9, 0x02a8, 0x82ad, 0x82a7, 0x02a2, |
| 0x82e3, 0x02e6, 0x02ec, 0x82e9, 0x02f8, 0x82fd, 0x82f7, 0x02f2, |
| 0x02d0, 0x82d5, 0x82df, 0x02da, 0x82cb, 0x02ce, 0x02c4, 0x82c1, |
| 0x8243, 0x0246, 0x024c, 0x8249, 0x0258, 0x825d, 0x8257, 0x0252, |
| 0x0270, 0x8275, 0x827f, 0x027a, 0x826b, 0x026e, 0x0264, 0x8261, |
| 0x0220, 0x8225, 0x822f, 0x022a, 0x823b, 0x023e, 0x0234, 0x8231, |
| 0x8213, 0x0216, 0x021c, 0x8219, 0x0208, 0x820d, 0x8207, 0x0202, |
| }; |
| |
| static inline u16 crc16_byte(u16 crc, const u8 data) |
| { |
| u16 t = crc16_table[((crc >> 8) ^ bitreverse_table[data]) & 0xff]; |
| return ((crc << 8) ^ t); |
| } |
| |
| static u16 atsha204a_crc16(const u8 *buffer, size_t len) |
| { |
| u16 crc = 0; |
| |
| while (len--) |
| crc = crc16_byte(crc, *buffer++); |
| |
| return cpu_to_le16(crc); |
| } |
| |
| static int atsha204a_send(struct udevice *dev, const u8 *buf, u8 len) |
| { |
| fdt_addr_t *priv = dev_get_priv(dev); |
| struct i2c_msg msg; |
| |
| msg.addr = *priv; |
| msg.flags = I2C_M_STOP; |
| msg.len = len; |
| msg.buf = (u8 *) buf; |
| |
| return dm_i2c_xfer(dev, &msg, 1); |
| } |
| |
| static int atsha204a_recv(struct udevice *dev, u8 *buf, u8 len) |
| { |
| fdt_addr_t *priv = dev_get_priv(dev); |
| struct i2c_msg msg; |
| |
| msg.addr = *priv; |
| msg.flags = I2C_M_RD | I2C_M_STOP; |
| msg.len = len; |
| msg.buf = (u8 *) buf; |
| |
| return dm_i2c_xfer(dev, &msg, 1); |
| } |
| |
| static int atsha204a_recv_resp(struct udevice *dev, |
| struct atsha204a_resp *resp) |
| { |
| int res; |
| u16 resp_crc, computed_crc; |
| u8 *p = (u8 *) resp; |
| |
| res = atsha204a_recv(dev, p, 4); |
| if (res) |
| return res; |
| |
| if (resp->length > 4) { |
| if (resp->length > sizeof(*resp)) |
| return -EMSGSIZE; |
| |
| res = atsha204a_recv(dev, p + 4, resp->length - 4); |
| if (res) |
| return res; |
| } |
| |
| resp_crc = (u16) p[resp->length - 2] |
| | (((u16) p[resp->length - 1]) << 8); |
| computed_crc = atsha204a_crc16(p, resp->length - 2); |
| |
| if (resp_crc != computed_crc) { |
| debug("Invalid checksum in ATSHA204A response\n"); |
| return -EBADMSG; |
| } |
| |
| return 0; |
| } |
| |
| int atsha204a_wakeup(struct udevice *dev) |
| { |
| u8 req[4]; |
| struct atsha204a_resp resp; |
| int try, res; |
| |
| debug("Waking up ATSHA204A\n"); |
| |
| for (try = 1; try <= 10; ++try) { |
| debug("Try %i... ", try); |
| |
| memset(req, 0, 4); |
| res = atsha204a_send(dev, req, 4); |
| if (res) { |
| debug("failed on I2C send, trying again\n"); |
| continue; |
| } |
| |
| udelay(ATSHA204A_TWLO); |
| |
| res = atsha204a_recv_resp(dev, &resp); |
| if (res) { |
| debug("failed on receiving response, ending\n"); |
| return res; |
| } |
| |
| if (resp.code != ATSHA204A_STATUS_AFTER_WAKE) { |
| debug ("failed (responce code = %02x), ending\n", |
| resp.code); |
| return -EBADMSG; |
| } |
| |
| debug("success\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int atsha204a_idle(struct udevice *dev) |
| { |
| int res; |
| u8 req = ATSHA204A_FUNC_IDLE; |
| |
| res = atsha204a_send(dev, &req, 1); |
| if (res) |
| debug("Failed putting ATSHA204A idle\n"); |
| return res; |
| } |
| |
| int atsha204a_sleep(struct udevice *dev) |
| { |
| int res; |
| u8 req = ATSHA204A_FUNC_IDLE; |
| |
| res = atsha204a_send(dev, &req, 1); |
| if (res) |
| debug("Failed putting ATSHA204A to sleep\n"); |
| return res; |
| } |
| |
| static int atsha204a_transaction(struct udevice *dev, struct atsha204a_req *req, |
| struct atsha204a_resp *resp) |
| { |
| int res, timeout = ATSHA204A_TRANSACTION_TIMEOUT; |
| |
| res = atsha204a_send(dev, (u8 *) req, req->length + 1); |
| if (res) { |
| debug("ATSHA204A transaction send failed\n"); |
| return -EBUSY; |
| } |
| |
| do { |
| res = atsha204a_recv_resp(dev, resp); |
| if (!res || res == -EMSGSIZE || res == -EBADMSG) |
| break; |
| |
| debug("ATSHA204A transaction polling for response " |
| "(timeout = %d)\n", timeout); |
| |
| udelay(ATSHA204A_EXECTIME); |
| timeout -= ATSHA204A_EXECTIME; |
| } while (timeout > 0); |
| |
| if (timeout <= 0) { |
| debug("ATSHA204A transaction timed out\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return res; |
| } |
| |
| static void atsha204a_req_crc32(struct atsha204a_req *req) |
| { |
| u8 *p = (u8 *) req; |
| u16 computed_crc; |
| u16 *crc_ptr = (u16 *) &p[req->length - 1]; |
| |
| /* The buffer to crc16 starts at byte 1, not 0 */ |
| computed_crc = atsha204a_crc16(p + 1, req->length - 2); |
| |
| *crc_ptr = cpu_to_le16(computed_crc); |
| } |
| |
| int atsha204a_read(struct udevice *dev, enum atsha204a_zone zone, bool read32, |
| u16 addr, u8 *buffer) |
| { |
| int res, retry = ATSHA204A_TRANSACTION_RETRY; |
| struct atsha204a_req req; |
| struct atsha204a_resp resp; |
| |
| req.function = ATSHA204A_FUNC_COMMAND; |
| req.length = 7; |
| req.command = ATSHA204A_CMD_READ; |
| |
| req.param1 = (u8) zone; |
| if (read32) |
| req.param1 |= 0x80; |
| |
| req.param2 = cpu_to_le16(addr); |
| |
| atsha204a_req_crc32(&req); |
| |
| do { |
| res = atsha204a_transaction(dev, &req, &resp); |
| if (!res) |
| break; |
| |
| debug("ATSHA204A read retry (%d)\n", retry); |
| retry--; |
| atsha204a_wakeup(dev); |
| } while (retry >= 0); |
| |
| if (res) { |
| debug("ATSHA204A read failed\n"); |
| return res; |
| } |
| |
| if (resp.length != (read32 ? 32 : 4) + 3) { |
| debug("ATSHA204A read bad response length (%d)\n", |
| resp.length); |
| return -EBADMSG; |
| } |
| |
| memcpy(buffer, ((u8 *) &resp) + 1, read32 ? 32 : 4); |
| |
| return 0; |
| } |
| |
| int atsha204a_get_random(struct udevice *dev, u8 *buffer, size_t max) |
| { |
| int res; |
| struct atsha204a_req req; |
| struct atsha204a_resp resp; |
| |
| req.function = ATSHA204A_FUNC_COMMAND; |
| req.length = 7; |
| req.command = ATSHA204A_CMD_RANDOM; |
| |
| req.param1 = 1; |
| req.param2 = 0; |
| |
| /* We do not have to compute the checksum dynamically */ |
| req.data[0] = 0x27; |
| req.data[1] = 0x47; |
| |
| res = atsha204a_transaction(dev, &req, &resp); |
| if (res) { |
| debug("ATSHA204A random transaction failed\n"); |
| return res; |
| } |
| |
| memcpy(buffer, ((u8 *) &resp) + 1, max >= 32 ? 32 : max); |
| return 0; |
| } |
| |
| static int atsha204a_of_to_plat(struct udevice *dev) |
| { |
| fdt_addr_t *priv = dev_get_priv(dev); |
| fdt_addr_t addr; |
| |
| addr = fdtdec_get_addr(gd->fdt_blob, dev_of_offset(dev), "reg"); |
| if (addr == FDT_ADDR_T_NONE) { |
| debug("Can't get ATSHA204A I2C base address\n"); |
| return -ENXIO; |
| } |
| |
| *priv = addr; |
| return 0; |
| } |
| |
| static const struct udevice_id atsha204a_ids[] = { |
| { .compatible = "atmel,atsha204a" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(atsha204) = { |
| .name = "atsha204", |
| .id = UCLASS_MISC, |
| .of_match = atsha204a_ids, |
| .of_to_plat = atsha204a_of_to_plat, |
| .priv_auto = sizeof(fdt_addr_t), |
| }; |