blob: af3c755f96311a66657152313a745805daec462b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Texas Instruments' OMAP serial driver
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <dt-structs.h>
#include <ns16550.h>
#include <serial.h>
#include <clk.h>
#ifndef CONFIG_SYS_NS16550_CLK
#define CONFIG_SYS_NS16550_CLK 0
#endif
#ifdef CONFIG_DEBUG_UART_OMAP
#include <debug_uart.h>
static inline void _debug_uart_init(void)
{
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
int baud_divisor;
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
CONFIG_BAUDRATE);
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
serial_dout(&com_port->mdr1, 0x7);
serial_dout(&com_port->mcr, UART_MCRVAL);
serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
serial_dout(&com_port->dll, baud_divisor & 0xff);
serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
serial_dout(&com_port->lcr, UART_LCRVAL);
serial_dout(&com_port->mdr1, 0x0);
}
static inline void _debug_uart_putc(int ch)
{
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
;
serial_dout(&com_port->thr, ch);
}
DEBUG_UART_FUNCS
#endif
#if CONFIG_IS_ENABLED(DM_SERIAL)
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static int omap_serial_ofdata_to_platdata(struct udevice *dev)
{
struct ns16550_platdata *plat = dev->platdata;
fdt_addr_t addr;
struct clk clk;
int err;
/* try Processor Local Bus device first */
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
plat->reg_shift = 2;
err = clk_get_by_index(dev, 0, &clk);
if (!err) {
err = clk_get_rate(&clk);
if (!IS_ERR_VALUE(err))
plat->clock = err;
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
debug("omap serial failed to get clock\n");
return err;
}
if (!plat->clock)
plat->clock = dev_read_u32_default(dev, "clock-frequency",
CONFIG_SYS_NS16550_CLK);
if (!plat->clock) {
debug("omap serial clock not defined\n");
return -EINVAL;
}
plat->fcr = UART_FCR_DEFVAL;
return 0;
}
static const struct udevice_id omap_serial_ids[] = {
{ .compatible = "ti,omap2-uart", },
{ .compatible = "ti,omap3-uart", },
{ .compatible = "ti,omap4-uart", },
{ .compatible = "ti,am3352-uart", },
{ .compatible = "ti,am4372-uart", },
{ .compatible = "ti,dra742-uart", },
{ .compatible = "ti,am654-uart", },
{}
};
#endif /* OF_CONTROL && !OF_PLATDATA */
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
U_BOOT_DRIVER(omap_serial) = {
.name = "omap_serial",
.id = UCLASS_SERIAL,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = omap_serial_ids,
.ofdata_to_platdata = omap_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
#endif
.priv_auto_alloc_size = sizeof(struct NS16550),
.probe = ns16550_serial_probe,
.ops = &ns16550_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
#endif
#endif /* DM_SERIAL */