| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * 'bootflow' command |
| * |
| * Copyright 2021 Google LLC |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <bootdev.h> |
| #include <bootflow.h> |
| #include <bootm.h> |
| #include <bootstd.h> |
| #include <command.h> |
| #include <console.h> |
| #include <dm.h> |
| #include <mapmem.h> |
| |
| /** |
| * report_bootflow_err() - Report where a bootflow failed |
| * |
| * When a bootflow does not make it to the 'loaded' state, something went wrong. |
| * Print a helpful message if there is an error |
| * |
| * @bflow: Bootflow to process |
| * @err: Error code (0 if none) |
| */ |
| static void report_bootflow_err(struct bootflow *bflow, int err) |
| { |
| if (!err) |
| return; |
| |
| /* Indent out to 'Method' */ |
| printf(" ** "); |
| |
| switch (bflow->state) { |
| case BOOTFLOWST_BASE: |
| printf("No media/partition found"); |
| break; |
| case BOOTFLOWST_MEDIA: |
| printf("No partition found"); |
| break; |
| case BOOTFLOWST_PART: |
| printf("No filesystem found"); |
| break; |
| case BOOTFLOWST_FS: |
| printf("File not found"); |
| break; |
| case BOOTFLOWST_FILE: |
| printf("File cannot be loaded"); |
| break; |
| case BOOTFLOWST_READY: |
| printf("Ready"); |
| break; |
| case BOOTFLOWST_COUNT: |
| break; |
| } |
| |
| printf(", err=%dE\n", err); |
| } |
| |
| /** |
| * show_bootflow() - Show the status of a bootflow |
| * |
| * @seq: Bootflow index |
| * @bflow: Bootflow to show |
| * @errors: True to show the error received, if any |
| */ |
| static void show_bootflow(int index, struct bootflow *bflow, bool errors) |
| { |
| printf("%3x %-11s %-6s %-9.9s %4x %-25.25s %s\n", index, |
| bflow->method->name, bootflow_state_get_name(bflow->state), |
| bflow->dev ? dev_get_uclass_name(dev_get_parent(bflow->dev)) : |
| "(none)", bflow->part, bflow->name, bflow->fname ?: ""); |
| if (errors) |
| report_bootflow_err(bflow, bflow->err); |
| } |
| |
| static void show_header(void) |
| { |
| printf("Seq Method State Uclass Part Name Filename\n"); |
| printf("--- ----------- ------ -------- ---- ------------------------ ----------------\n"); |
| } |
| |
| static void show_footer(int count, int num_valid) |
| { |
| printf("--- ----------- ------ -------- ---- ------------------------ ----------------\n"); |
| printf("(%d bootflow%s, %d valid)\n", count, count != 1 ? "s" : "", |
| num_valid); |
| } |
| |
| static int do_bootflow_scan(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow_iter iter; |
| struct udevice *dev = NULL; |
| struct bootflow bflow; |
| bool all = false, boot = false, errors = false, no_global = false; |
| bool list = false, no_hunter = false; |
| int num_valid = 0; |
| const char *label = NULL; |
| bool has_args; |
| int ret, i; |
| int flags; |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| has_args = argc > 1 && *argv[1] == '-'; |
| if (IS_ENABLED(CONFIG_CMD_BOOTFLOW_FULL)) { |
| if (has_args) { |
| all = strchr(argv[1], 'a'); |
| boot = strchr(argv[1], 'b'); |
| errors = strchr(argv[1], 'e'); |
| no_global = strchr(argv[1], 'G'); |
| list = strchr(argv[1], 'l'); |
| no_hunter = strchr(argv[1], 'H'); |
| argc--; |
| argv++; |
| } |
| if (argc > 1) |
| label = argv[1]; |
| if (!label) |
| dev = std->cur_bootdev; |
| } else { |
| if (has_args) { |
| printf("Flags not supported: enable CONFIG_BOOTSTD_FULL\n"); |
| return CMD_RET_USAGE; |
| } |
| boot = true; |
| } |
| |
| std->cur_bootflow = NULL; |
| |
| flags = 0; |
| if (list) |
| flags |= BOOTFLOWIF_SHOW; |
| if (all) |
| flags |= BOOTFLOWIF_ALL; |
| if (no_global) |
| flags |= BOOTFLOWIF_SKIP_GLOBAL; |
| if (!no_hunter) |
| flags |= BOOTFLOWIF_HUNT; |
| |
| /* |
| * If we have a device, just scan for bootflows attached to that device |
| */ |
| if (list) { |
| printf("Scanning for bootflows "); |
| if (dev) |
| printf("in bootdev '%s'\n", dev->name); |
| else if (label) |
| printf("with label '%s'\n", label); |
| else |
| printf("in all bootdevs\n"); |
| show_header(); |
| } |
| if (dev) |
| bootdev_clear_bootflows(dev); |
| else |
| bootstd_clear_glob(); |
| for (i = 0, |
| ret = bootflow_scan_first(dev, label, &iter, flags, &bflow); |
| i < 1000 && ret != -ENODEV; |
| i++, ret = bootflow_scan_next(&iter, &bflow)) { |
| bflow.err = ret; |
| if (!ret) |
| num_valid++; |
| ret = bootdev_add_bootflow(&bflow); |
| if (ret) { |
| printf("Out of memory\n"); |
| return CMD_RET_FAILURE; |
| } |
| if (list) |
| show_bootflow(i, &bflow, errors); |
| if (boot && !bflow.err) |
| bootflow_run_boot(&iter, &bflow); |
| } |
| bootflow_iter_uninit(&iter); |
| if (list) |
| show_footer(i, num_valid); |
| |
| if (IS_ENABLED(CONFIG_CMD_BOOTFLOW_FULL) && !num_valid && !list) |
| printf("No bootflows found; try again with -l\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_BOOTFLOW_FULL |
| static int do_bootflow_list(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct udevice *dev; |
| struct bootflow *bflow; |
| int num_valid = 0; |
| bool errors = false; |
| int ret, i; |
| |
| if (argc > 1 && *argv[1] == '-') |
| errors = strchr(argv[1], 'e'); |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| dev = std->cur_bootdev; |
| |
| /* If we have a device, just list bootflows attached to that device */ |
| if (dev) { |
| printf("Showing bootflows for bootdev '%s'\n", dev->name); |
| show_header(); |
| for (ret = bootdev_first_bootflow(dev, &bflow), i = 0; |
| !ret; |
| ret = bootdev_next_bootflow(&bflow), i++) { |
| num_valid += bflow->state == BOOTFLOWST_READY; |
| show_bootflow(i, bflow, errors); |
| } |
| } else { |
| printf("Showing all bootflows\n"); |
| show_header(); |
| for (ret = bootflow_first_glob(&bflow), i = 0; |
| !ret; |
| ret = bootflow_next_glob(&bflow), i++) { |
| num_valid += bflow->state == BOOTFLOWST_READY; |
| show_bootflow(i, bflow, errors); |
| } |
| } |
| show_footer(i, num_valid); |
| |
| return 0; |
| } |
| |
| static int do_bootflow_select(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow, *found; |
| struct udevice *dev; |
| const char *name; |
| char *endp; |
| int seq, i; |
| int ret; |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| ; |
| if (argc < 2) { |
| std->cur_bootflow = NULL; |
| return 0; |
| } |
| dev = std->cur_bootdev; |
| |
| name = argv[1]; |
| seq = simple_strtol(name, &endp, 16); |
| found = NULL; |
| |
| /* |
| * If we have a bootdev device, only allow selection of bootflows |
| * attached to that device |
| */ |
| if (dev) { |
| for (ret = bootdev_first_bootflow(dev, &bflow), i = 0; |
| !ret; |
| ret = bootdev_next_bootflow(&bflow), i++) { |
| if (*endp ? !strcmp(bflow->name, name) : i == seq) { |
| found = bflow; |
| break; |
| } |
| } |
| } else { |
| for (ret = bootflow_first_glob(&bflow), i = 0; |
| !ret; |
| ret = bootflow_next_glob(&bflow), i++) { |
| if (*endp ? !strcmp(bflow->name, name) : i == seq) { |
| found = bflow; |
| break; |
| } |
| } |
| } |
| |
| if (!found) { |
| printf("Cannot find bootflow '%s' ", name); |
| if (dev) |
| printf("in bootdev '%s' ", dev->name); |
| printf("(err=%d)\n", ret); |
| return CMD_RET_FAILURE; |
| } |
| std->cur_bootflow = found; |
| if (IS_ENABLED(CONFIG_BOOTSTD_FULL)) { |
| if (env_set("bootargs", found->cmdline)) { |
| printf("Cannot set bootargs\n"); |
| return CMD_RET_FAILURE; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int do_bootflow_info(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow; |
| bool x86_setup = false; |
| bool dump = false; |
| int ret; |
| |
| if (argc > 1 && *argv[1] == '-') { |
| dump = strchr(argv[1], 'd'); |
| x86_setup = strchr(argv[1], 's'); |
| } |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| if (!std->cur_bootflow) { |
| printf("No bootflow selected\n"); |
| return CMD_RET_FAILURE; |
| } |
| bflow = std->cur_bootflow; |
| |
| if (IS_ENABLED(CONFIG_X86) && x86_setup) { |
| zimage_dump(bflow->x86_setup, false); |
| |
| return 0; |
| } |
| |
| printf("Name: %s\n", bflow->name); |
| printf("Device: %s\n", bflow->dev->name); |
| printf("Block dev: %s\n", bflow->blk ? bflow->blk->name : "(none)"); |
| printf("Method: %s\n", bflow->method->name); |
| printf("State: %s\n", bootflow_state_get_name(bflow->state)); |
| printf("Partition: %d\n", bflow->part); |
| printf("Subdir: %s\n", bflow->subdir ? bflow->subdir : "(none)"); |
| printf("Filename: %s\n", bflow->fname); |
| printf("Buffer: %lx\n", (ulong)map_to_sysmem(bflow->buf)); |
| printf("Size: %x (%d bytes)\n", bflow->size, bflow->size); |
| printf("OS: %s\n", bflow->os_name ? bflow->os_name : "(none)"); |
| printf("Cmdline: "); |
| if (bflow->cmdline) |
| puts(bflow->cmdline); |
| else |
| puts("(none)"); |
| putc('\n'); |
| if (bflow->x86_setup) |
| printf("X86 setup: %p\n", bflow->x86_setup); |
| printf("Logo: %s\n", bflow->logo ? |
| simple_xtoa((ulong)map_to_sysmem(bflow->logo)) : "(none)"); |
| if (bflow->logo) { |
| printf("Logo size: %x (%d bytes)\n", bflow->logo_size, |
| bflow->logo_size); |
| } |
| printf("FDT: %s\n", bflow->fdt_fname); |
| if (bflow->fdt_fname) { |
| printf("FDT size: %x (%d bytes)\n", bflow->fdt_size, |
| bflow->fdt_size); |
| printf("FDT addr: %lx\n", bflow->fdt_addr); |
| } |
| printf("Error: %d\n", bflow->err); |
| if (dump && bflow->buf) { |
| /* Set some sort of maximum on the size */ |
| int size = min(bflow->size, 10 << 10); |
| int i; |
| |
| printf("Contents:\n\n"); |
| for (i = 0; i < size; i++) { |
| putc(bflow->buf[i]); |
| if (!(i % 128) && ctrlc()) { |
| printf("...interrupted\n"); |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int do_bootflow_read(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow; |
| int ret; |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| /* |
| * Require a current bootflow. Users can use 'bootflow scan -b' to |
| * automatically scan and boot, if needed. |
| */ |
| if (!std->cur_bootflow) { |
| printf("No bootflow selected\n"); |
| return CMD_RET_FAILURE; |
| } |
| bflow = std->cur_bootflow; |
| ret = bootflow_read_all(bflow); |
| if (ret) { |
| printf("Failed: err=%dE\n", ret); |
| return CMD_RET_FAILURE; |
| } |
| |
| return 0; |
| } |
| |
| static int do_bootflow_boot(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow; |
| int ret; |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| /* |
| * Require a current bootflow. Users can use 'bootflow scan -b' to |
| * automatically scan and boot, if needed. |
| */ |
| if (!std->cur_bootflow) { |
| printf("No bootflow selected\n"); |
| return CMD_RET_FAILURE; |
| } |
| bflow = std->cur_bootflow; |
| ret = bootflow_run_boot(NULL, bflow); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| return 0; |
| } |
| |
| static int do_bootflow_menu(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow; |
| bool text_mode = false; |
| int ret; |
| |
| if (!IS_ENABLED(CONFIG_EXPO)) { |
| printf("Menu not supported\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (argc > 1 && *argv[1] == '-') |
| text_mode = strchr(argv[1], 't'); |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| ret = bootflow_menu_run(std, text_mode, &bflow); |
| if (ret) { |
| if (ret == -EAGAIN) |
| printf("Nothing chosen\n"); |
| else { |
| printf("Menu failed (err=%d)\n", ret); |
| return CMD_RET_FAILURE; |
| } |
| } |
| |
| printf("Selected: %s\n", bflow->os_name ? bflow->os_name : bflow->name); |
| std->cur_bootflow = bflow; |
| |
| return 0; |
| } |
| |
| static int do_bootflow_cmdline(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| struct bootstd_priv *std; |
| struct bootflow *bflow; |
| const char *op, *arg, *val = NULL; |
| int ret; |
| |
| if (argc < 3) |
| return CMD_RET_USAGE; |
| |
| ret = bootstd_get_priv(&std); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| bflow = std->cur_bootflow; |
| if (!bflow) { |
| printf("No bootflow selected\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| op = argv[1]; |
| arg = argv[2]; |
| if (*op == 's') { |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| val = argv[3]; |
| } |
| |
| switch (*op) { |
| case 'c': /* clear */ |
| val = ""; |
| fallthrough; |
| case 's': /* set */ |
| case 'd': /* delete */ |
| ret = bootflow_cmdline_set_arg(bflow, arg, val, true); |
| break; |
| case 'g': /* get */ |
| ret = bootflow_cmdline_get_arg(bflow, arg, &val); |
| if (ret >= 0) |
| printf("%.*s\n", ret, val); |
| break; |
| case 'a': /* auto */ |
| ret = bootflow_cmdline_auto(bflow, arg); |
| break; |
| } |
| switch (ret) { |
| case -E2BIG: |
| printf("Argument too long\n"); |
| break; |
| case -ENOENT: |
| printf("Argument not found\n"); |
| break; |
| case -EINVAL: |
| printf("Mismatched quotes\n"); |
| break; |
| case -EBADF: |
| printf("Value must be quoted\n"); |
| break; |
| default: |
| if (ret < 0) |
| printf("Unknown error: %dE\n", ret); |
| } |
| if (ret < 0) |
| return CMD_RET_FAILURE; |
| |
| return 0; |
| } |
| #endif /* CONFIG_CMD_BOOTFLOW_FULL */ |
| |
| U_BOOT_LONGHELP(bootflow, |
| #ifdef CONFIG_CMD_BOOTFLOW_FULL |
| "scan [-abeGl] [bdev] - scan for valid bootflows (-l list, -a all, -e errors, -b boot, -G no global)\n" |
| "bootflow list [-e] - list scanned bootflows (-e errors)\n" |
| "bootflow select [<num>|<name>] - select a bootflow\n" |
| "bootflow info [-ds] - show info on current bootflow (-d dump bootflow)\n" |
| "bootflow read - read all current-bootflow files\n" |
| "bootflow boot - boot current bootflow\n" |
| "bootflow menu [-t] - show a menu of available bootflows\n" |
| "bootflow cmdline [set|get|clear|delete|auto] <param> [<value>] - update cmdline" |
| #else |
| "scan - boot first available bootflow\n" |
| #endif |
| ); |
| |
| U_BOOT_CMD_WITH_SUBCMDS(bootflow, "Boot flows", bootflow_help_text, |
| U_BOOT_SUBCMD_MKENT(scan, 3, 1, do_bootflow_scan), |
| #ifdef CONFIG_CMD_BOOTFLOW_FULL |
| U_BOOT_SUBCMD_MKENT(list, 2, 1, do_bootflow_list), |
| U_BOOT_SUBCMD_MKENT(select, 2, 1, do_bootflow_select), |
| U_BOOT_SUBCMD_MKENT(info, 2, 1, do_bootflow_info), |
| U_BOOT_SUBCMD_MKENT(read, 1, 1, do_bootflow_read), |
| U_BOOT_SUBCMD_MKENT(boot, 1, 1, do_bootflow_boot), |
| U_BOOT_SUBCMD_MKENT(menu, 2, 1, do_bootflow_menu), |
| U_BOOT_SUBCMD_MKENT(cmdline, 4, 1, do_bootflow_cmdline), |
| #endif |
| ); |