| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Freescale SerDes initialization routine |
| * |
| * Copyright 2007,2011 Freescale Semiconductor, Inc. |
| * Copyright (C) 2008 MontaVista Software, Inc. |
| * |
| * Author: Li Yang <leoli@freescale.com> |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/fsl_mpc83xx_serdes.h> |
| |
| /* SerDes registers */ |
| #define FSL_SRDSCR0_OFFS 0x0 |
| #define FSL_SRDSCR0_DPP_1V2 0x00008800 |
| #define FSL_SRDSCR0_TXEQA_MASK 0x00007000 |
| #define FSL_SRDSCR0_TXEQA_SATA 0x00001000 |
| #define FSL_SRDSCR0_TXEQE_MASK 0x00000700 |
| #define FSL_SRDSCR0_TXEQE_SATA 0x00000100 |
| #define FSL_SRDSCR1_OFFS 0x4 |
| #define FSL_SRDSCR1_PLLBW 0x00000040 |
| #define FSL_SRDSCR2_OFFS 0x8 |
| #define FSL_SRDSCR2_VDD_1V2 0x00800000 |
| #define FSL_SRDSCR2_SEIC_MASK 0x00001c1c |
| #define FSL_SRDSCR2_SEIC_SATA 0x00001414 |
| #define FSL_SRDSCR2_SEIC_PEX 0x00001010 |
| #define FSL_SRDSCR2_SEIC_SGMII 0x00000101 |
| #define FSL_SRDSCR3_OFFS 0xc |
| #define FSL_SRDSCR3_KFR_SATA 0x10100000 |
| #define FSL_SRDSCR3_KPH_SATA 0x04040000 |
| #define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000 |
| #define FSL_SRDSCR3_SDTXL_SATA 0x00000505 |
| #define FSL_SRDSCR4_OFFS 0x10 |
| #define FSL_SRDSCR4_PROT_SATA 0x00000808 |
| #define FSL_SRDSCR4_PROT_PEX 0x00000101 |
| #define FSL_SRDSCR4_PROT_SGMII 0x00000505 |
| #define FSL_SRDSCR4_PLANE_X2 0x01000000 |
| #define FSL_SRDSRSTCTL_OFFS 0x20 |
| #define FSL_SRDSRSTCTL_RST 0x80000000 |
| #define FSL_SRDSRSTCTL_SATA_RESET 0xf |
| |
| void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd) |
| { |
| void *regs = (void *)CONFIG_SYS_IMMR + offset; |
| u32 tmp; |
| |
| /* 1.0V corevdd */ |
| if (vdd) { |
| /* DPPE/DPPA = 0 */ |
| tmp = in_be32(regs + FSL_SRDSCR0_OFFS); |
| tmp &= ~FSL_SRDSCR0_DPP_1V2; |
| out_be32(regs + FSL_SRDSCR0_OFFS, tmp); |
| |
| /* VDD = 0 */ |
| tmp = in_be32(regs + FSL_SRDSCR2_OFFS); |
| tmp &= ~FSL_SRDSCR2_VDD_1V2; |
| out_be32(regs + FSL_SRDSCR2_OFFS, tmp); |
| } |
| |
| /* protocol specific configuration */ |
| switch (proto) { |
| case FSL_SERDES_PROTO_SATA: |
| /* Set and clear reset bits */ |
| tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS); |
| tmp |= FSL_SRDSRSTCTL_SATA_RESET; |
| out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); |
| udelay(1000); |
| tmp &= ~FSL_SRDSRSTCTL_SATA_RESET; |
| out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); |
| |
| /* Configure SRDSCR0 */ |
| clrsetbits_be32(regs + FSL_SRDSCR0_OFFS, |
| FSL_SRDSCR0_TXEQA_MASK | FSL_SRDSCR0_TXEQE_MASK, |
| FSL_SRDSCR0_TXEQA_SATA | FSL_SRDSCR0_TXEQE_SATA); |
| |
| /* Configure SRDSCR1 */ |
| tmp = in_be32(regs + FSL_SRDSCR1_OFFS); |
| tmp &= ~FSL_SRDSCR1_PLLBW; |
| out_be32(regs + FSL_SRDSCR1_OFFS, tmp); |
| |
| /* Configure SRDSCR2 */ |
| tmp = in_be32(regs + FSL_SRDSCR2_OFFS); |
| tmp &= ~FSL_SRDSCR2_SEIC_MASK; |
| tmp |= FSL_SRDSCR2_SEIC_SATA; |
| out_be32(regs + FSL_SRDSCR2_OFFS, tmp); |
| |
| /* Configure SRDSCR3 */ |
| tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA | |
| FSL_SRDSCR3_SDFM_SATA_PEX | |
| FSL_SRDSCR3_SDTXL_SATA; |
| out_be32(regs + FSL_SRDSCR3_OFFS, tmp); |
| |
| /* Configure SRDSCR4 */ |
| tmp = rfcks | FSL_SRDSCR4_PROT_SATA; |
| out_be32(regs + FSL_SRDSCR4_OFFS, tmp); |
| break; |
| case FSL_SERDES_PROTO_PEX: |
| case FSL_SERDES_PROTO_PEX_X2: |
| /* Configure SRDSCR1 */ |
| tmp = in_be32(regs + FSL_SRDSCR1_OFFS); |
| tmp |= FSL_SRDSCR1_PLLBW; |
| out_be32(regs + FSL_SRDSCR1_OFFS, tmp); |
| |
| /* Configure SRDSCR2 */ |
| tmp = in_be32(regs + FSL_SRDSCR2_OFFS); |
| tmp &= ~FSL_SRDSCR2_SEIC_MASK; |
| tmp |= FSL_SRDSCR2_SEIC_PEX; |
| out_be32(regs + FSL_SRDSCR2_OFFS, tmp); |
| |
| /* Configure SRDSCR3 */ |
| tmp = FSL_SRDSCR3_SDFM_SATA_PEX; |
| out_be32(regs + FSL_SRDSCR3_OFFS, tmp); |
| |
| /* Configure SRDSCR4 */ |
| tmp = rfcks | FSL_SRDSCR4_PROT_PEX; |
| if (proto == FSL_SERDES_PROTO_PEX_X2) |
| tmp |= FSL_SRDSCR4_PLANE_X2; |
| out_be32(regs + FSL_SRDSCR4_OFFS, tmp); |
| break; |
| case FSL_SERDES_PROTO_SGMII: |
| /* Configure SRDSCR1 */ |
| tmp = in_be32(regs + FSL_SRDSCR1_OFFS); |
| tmp &= ~FSL_SRDSCR1_PLLBW; |
| out_be32(regs + FSL_SRDSCR1_OFFS, tmp); |
| |
| /* Configure SRDSCR2 */ |
| tmp = in_be32(regs + FSL_SRDSCR2_OFFS); |
| tmp &= ~FSL_SRDSCR2_SEIC_MASK; |
| tmp |= FSL_SRDSCR2_SEIC_SGMII; |
| out_be32(regs + FSL_SRDSCR2_OFFS, tmp); |
| |
| /* Configure SRDSCR3 */ |
| out_be32(regs + FSL_SRDSCR3_OFFS, 0); |
| |
| /* Configure SRDSCR4 */ |
| tmp = rfcks | FSL_SRDSCR4_PROT_SGMII; |
| out_be32(regs + FSL_SRDSCR4_OFFS, tmp); |
| break; |
| default: |
| return; |
| } |
| |
| /* Do a software reset */ |
| tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS); |
| tmp |= FSL_SRDSRSTCTL_RST; |
| out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); |
| } |