| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Xilinx, Inc. |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <malloc.h> |
| #include <u-boot/md5.h> |
| #include <u-boot/rsa.h> |
| #include <u-boot/rsa-mod-exp.h> |
| #include <u-boot/sha256.h> |
| #include <zynqpl.h> |
| #include <fpga.h> |
| #include <zynq_bootimg.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef CONFIG_CMD_ZYNQ_RSA |
| |
| #define ZYNQ_EFUSE_RSA_ENABLE_MASK 0x400 |
| #define ZYNQ_ATTRIBUTE_PL_IMAGE_MASK 0x20 |
| #define ZYNQ_ATTRIBUTE_CHECKSUM_TYPE_MASK 0x7000 |
| #define ZYNQ_ATTRIBUTE_RSA_PRESENT_MASK 0x8000 |
| #define ZYNQ_ATTRIBUTE_RSA_PART_OWNER_MASK 0x30000 |
| |
| #define ZYNQ_RSA_MODULAR_SIZE 256 |
| #define ZYNQ_RSA_MODULAR_EXT_SIZE 256 |
| #define ZYNQ_RSA_EXPO_SIZE 64 |
| #define ZYNQ_RSA_SPK_SIGNATURE_SIZE 256 |
| #define ZYNQ_RSA_PARTITION_SIGNATURE_SIZE 256 |
| #define ZYNQ_RSA_SIGNATURE_SIZE 0x6C0 |
| #define ZYNQ_RSA_HEADER_SIZE 4 |
| #define ZYNQ_RSA_MAGIC_WORD_SIZE 60 |
| #define ZYNQ_RSA_PART_OWNER_UBOOT 1 |
| #define ZYNQ_RSA_ALIGN_PPK_START 64 |
| |
| #define WORD_LENGTH_SHIFT 2 |
| |
| static u8 *ppkmodular; |
| static u8 *ppkmodularex; |
| |
| struct zynq_rsa_public_key { |
| uint len; /* Length of modulus[] in number of u32 */ |
| u32 n0inv; /* -1 / modulus[0] mod 2^32 */ |
| u32 *modulus; /* modulus as little endian array */ |
| u32 *rr; /* R^2 as little endian array */ |
| }; |
| |
| static struct zynq_rsa_public_key public_key; |
| |
| static struct partition_hdr part_hdr[ZYNQ_MAX_PARTITION_NUMBER]; |
| |
| /* |
| * Extract the primary public key components from already autheticated FSBL |
| */ |
| static void zynq_extract_ppk(u32 fsbl_len) |
| { |
| u32 padsize; |
| u8 *ppkptr; |
| |
| debug("%s\n", __func__); |
| |
| /* |
| * Extract the authenticated PPK from OCM i.e at end of the FSBL |
| */ |
| ppkptr = (u8 *)(fsbl_len + ZYNQ_OCM_BASEADDR); |
| padsize = ((u32)ppkptr % ZYNQ_RSA_ALIGN_PPK_START); |
| if (padsize) |
| ppkptr += (ZYNQ_RSA_ALIGN_PPK_START - padsize); |
| |
| ppkptr += ZYNQ_RSA_HEADER_SIZE; |
| |
| ppkptr += ZYNQ_RSA_MAGIC_WORD_SIZE; |
| |
| ppkmodular = (u8 *)ppkptr; |
| ppkptr += ZYNQ_RSA_MODULAR_SIZE; |
| ppkmodularex = (u8 *)ppkptr; |
| ppkptr += ZYNQ_RSA_MODULAR_EXT_SIZE; |
| } |
| |
| /* |
| * Calculate the inverse(-1 / modulus[0] mod 2^32 ) for the PPK |
| */ |
| static u32 zynq_calc_inv(void) |
| { |
| u32 modulus = public_key.modulus[0]; |
| u32 tmp = BIT(1); |
| u32 inverse; |
| |
| inverse = modulus & BIT(0); |
| |
| while (tmp) { |
| inverse *= 2 - modulus * inverse; |
| tmp *= tmp; |
| } |
| |
| return ~(inverse - 1); |
| } |
| |
| /* |
| * Recreate the signature by padding the bytes and verify with hash value |
| */ |
| static int zynq_pad_and_check(u8 *signature, u8 *hash) |
| { |
| u8 padding[] = {0x30, 0x31, 0x30, 0x0D, 0x06, 0x09, 0x60, 0x86, 0x48, |
| 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, |
| 0x20}; |
| u8 *pad_ptr = signature + 256; |
| u32 pad = 202; |
| u32 ii; |
| |
| /* |
| * Re-Create PKCS#1v1.5 Padding |
| * MSB ----------------------------------------------------LSB |
| * 0x0 || 0x1 || 0xFF(for 202 bytes) || 0x0 || T_padding || SHA256 Hash |
| */ |
| if (*--pad_ptr != 0 || *--pad_ptr != 1) |
| return -1; |
| |
| for (ii = 0; ii < pad; ii++) { |
| if (*--pad_ptr != 0xFF) |
| return -1; |
| } |
| |
| if (*--pad_ptr != 0) |
| return -1; |
| |
| for (ii = 0; ii < sizeof(padding); ii++) { |
| if (*--pad_ptr != padding[ii]) |
| return -1; |
| } |
| |
| for (ii = 0; ii < 32; ii++) { |
| if (*--pad_ptr != hash[ii]) |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Verify and extract the hash value from signature using the public key |
| * and compare it with calculated hash value. |
| */ |
| static int zynq_rsa_verify_key(const struct zynq_rsa_public_key *key, |
| const u8 *sig, const u32 sig_len, const u8 *hash) |
| { |
| int status; |
| void *buf; |
| |
| if (!key || !sig || !hash) |
| return -1; |
| |
| if (sig_len != (key->len * sizeof(u32))) { |
| printf("Signature is of incorrect length %d\n", sig_len); |
| return -1; |
| } |
| |
| /* Sanity check for stack size */ |
| if (sig_len > ZYNQ_RSA_SPK_SIGNATURE_SIZE) { |
| printf("Signature length %u exceeds maximum %d\n", sig_len, |
| ZYNQ_RSA_SPK_SIGNATURE_SIZE); |
| return -1; |
| } |
| |
| buf = malloc(sig_len); |
| if (!buf) |
| return -1; |
| |
| memcpy(buf, sig, sig_len); |
| |
| status = zynq_pow_mod((u32 *)key, (u32 *)buf); |
| if (status == -1) { |
| free(buf); |
| return status; |
| } |
| |
| status = zynq_pad_and_check((u8 *)buf, (u8 *)hash); |
| |
| free(buf); |
| return status; |
| } |
| |
| /* |
| * Authenticate the partition |
| */ |
| static int zynq_authenticate_part(u8 *buffer, u32 size) |
| { |
| u8 hash_signature[32]; |
| u8 *spk_modular; |
| u8 *spk_modular_ex; |
| u8 *signature_ptr; |
| u32 status; |
| |
| debug("%s\n", __func__); |
| |
| signature_ptr = (u8 *)(buffer + size - ZYNQ_RSA_SIGNATURE_SIZE); |
| |
| signature_ptr += ZYNQ_RSA_HEADER_SIZE; |
| |
| signature_ptr += ZYNQ_RSA_MAGIC_WORD_SIZE; |
| |
| ppkmodular = (u8 *)signature_ptr; |
| signature_ptr += ZYNQ_RSA_MODULAR_SIZE; |
| ppkmodularex = signature_ptr; |
| signature_ptr += ZYNQ_RSA_MODULAR_EXT_SIZE; |
| signature_ptr += ZYNQ_RSA_EXPO_SIZE; |
| |
| sha256_csum_wd((const unsigned char *)signature_ptr, |
| (ZYNQ_RSA_MODULAR_EXT_SIZE + ZYNQ_RSA_EXPO_SIZE + |
| ZYNQ_RSA_MODULAR_SIZE), |
| (unsigned char *)hash_signature, 0x1000); |
| |
| spk_modular = (u8 *)signature_ptr; |
| signature_ptr += ZYNQ_RSA_MODULAR_SIZE; |
| spk_modular_ex = (u8 *)signature_ptr; |
| signature_ptr += ZYNQ_RSA_MODULAR_EXT_SIZE; |
| signature_ptr += ZYNQ_RSA_EXPO_SIZE; |
| |
| public_key.len = ZYNQ_RSA_MODULAR_SIZE / sizeof(u32); |
| public_key.modulus = (u32 *)ppkmodular; |
| public_key.rr = (u32 *)ppkmodularex; |
| public_key.n0inv = zynq_calc_inv(); |
| |
| status = zynq_rsa_verify_key(&public_key, signature_ptr, |
| ZYNQ_RSA_SPK_SIGNATURE_SIZE, |
| hash_signature); |
| if (status) |
| return status; |
| |
| signature_ptr += ZYNQ_RSA_SPK_SIGNATURE_SIZE; |
| |
| sha256_csum_wd((const unsigned char *)buffer, |
| (size - ZYNQ_RSA_PARTITION_SIGNATURE_SIZE), |
| (unsigned char *)hash_signature, 0x1000); |
| |
| public_key.len = ZYNQ_RSA_MODULAR_SIZE / sizeof(u32); |
| public_key.modulus = (u32 *)spk_modular; |
| public_key.rr = (u32 *)spk_modular_ex; |
| public_key.n0inv = zynq_calc_inv(); |
| |
| return zynq_rsa_verify_key(&public_key, (u8 *)signature_ptr, |
| ZYNQ_RSA_PARTITION_SIGNATURE_SIZE, |
| (u8 *)hash_signature); |
| } |
| |
| /* |
| * Parses the partition header and verfies the authenticated and |
| * encrypted image. |
| */ |
| static int zynq_verify_image(u32 src_ptr) |
| { |
| u32 silicon_ver, image_base_addr, status; |
| u32 partition_num = 0; |
| u32 efuseval, srcaddr, size, fsbl_len; |
| struct partition_hdr *hdr_ptr; |
| u32 part_data_len, part_img_len, part_attr; |
| u32 part_load_addr, part_dst_addr, part_chksum_offset; |
| u32 part_start_addr, part_total_size, partitioncount; |
| bool encrypt_part_flag = false; |
| bool part_chksum_flag = false; |
| bool signed_part_flag = false; |
| |
| image_base_addr = src_ptr; |
| |
| silicon_ver = zynq_get_silicon_version(); |
| |
| /* RSA not supported in silicon versions 1.0 and 2.0 */ |
| if (silicon_ver == 0 || silicon_ver == 1) |
| return -1; |
| |
| zynq_get_partition_info(image_base_addr, &fsbl_len, |
| &part_hdr[0]); |
| |
| /* Extract ppk if efuse was blown Otherwise return error */ |
| efuseval = readl(&efuse_base->status); |
| if (!(efuseval & ZYNQ_EFUSE_RSA_ENABLE_MASK)) |
| return -1; |
| |
| zynq_extract_ppk(fsbl_len); |
| |
| partitioncount = zynq_get_part_count(&part_hdr[0]); |
| |
| /* |
| * As the first two partitions are related to fsbl, |
| * we can ignore those two in bootimage and the below |
| * code doesn't need to validate it as fsbl is already |
| * done by now |
| */ |
| if (partitioncount <= 2 || |
| partitioncount > ZYNQ_MAX_PARTITION_NUMBER) |
| return -1; |
| |
| while (partition_num < partitioncount) { |
| if (((part_hdr[partition_num].partitionattr & |
| ZYNQ_ATTRIBUTE_RSA_PART_OWNER_MASK) >> 16) != |
| ZYNQ_RSA_PART_OWNER_UBOOT) { |
| printf("UBOOT is not Owner for partition %d\n", |
| partition_num); |
| partition_num++; |
| continue; |
| } |
| hdr_ptr = &part_hdr[partition_num]; |
| status = zynq_validate_hdr(hdr_ptr); |
| if (status) |
| return status; |
| |
| part_data_len = hdr_ptr->datawordlen; |
| part_img_len = hdr_ptr->imagewordlen; |
| part_attr = hdr_ptr->partitionattr; |
| part_load_addr = hdr_ptr->loadaddr; |
| part_chksum_offset = hdr_ptr->checksumoffset; |
| part_start_addr = hdr_ptr->partitionstart; |
| part_total_size = hdr_ptr->partitionwordlen; |
| |
| if (part_data_len != part_img_len) { |
| debug("Encrypted\n"); |
| encrypt_part_flag = true; |
| } |
| |
| if (part_attr & ZYNQ_ATTRIBUTE_CHECKSUM_TYPE_MASK) |
| part_chksum_flag = true; |
| |
| if (part_attr & ZYNQ_ATTRIBUTE_RSA_PRESENT_MASK) { |
| debug("RSA Signed\n"); |
| signed_part_flag = true; |
| size = part_total_size << WORD_LENGTH_SHIFT; |
| } else { |
| size = part_img_len; |
| } |
| |
| if (!signed_part_flag && !part_chksum_flag) { |
| printf("Partition not signed & no chksum\n"); |
| partition_num++; |
| continue; |
| } |
| |
| srcaddr = image_base_addr + |
| (part_start_addr << WORD_LENGTH_SHIFT); |
| |
| /* |
| * This validation is just for PS DDR. |
| * TODO: Update this for PL DDR check as well. |
| */ |
| if (part_load_addr < gd->bd->bi_dram[0].start && |
| ((part_load_addr + part_data_len) > |
| (gd->bd->bi_dram[0].start + |
| gd->bd->bi_dram[0].size))) { |
| printf("INVALID_LOAD_ADDRESS_FAIL\n"); |
| return -1; |
| } |
| |
| if (part_attr & ZYNQ_ATTRIBUTE_PL_IMAGE_MASK) |
| part_load_addr = srcaddr; |
| else |
| memcpy((u32 *)part_load_addr, (u32 *)srcaddr, |
| size); |
| |
| if (part_chksum_flag) { |
| part_chksum_offset = image_base_addr + |
| (part_chksum_offset << |
| WORD_LENGTH_SHIFT); |
| status = zynq_validate_partition(part_load_addr, |
| (part_total_size << |
| WORD_LENGTH_SHIFT), |
| part_chksum_offset); |
| if (status != 0) { |
| printf("PART_CHKSUM_FAIL\n"); |
| return -1; |
| } |
| debug("Partition Validation Done\n"); |
| } |
| |
| if (signed_part_flag) { |
| status = zynq_authenticate_part((u8 *)part_load_addr, |
| size); |
| if (status != 0) { |
| printf("AUTHENTICATION_FAIL\n"); |
| return -1; |
| } |
| debug("Authentication Done\n"); |
| } |
| |
| if (encrypt_part_flag) { |
| debug("DECRYPTION\n"); |
| |
| part_dst_addr = part_load_addr; |
| |
| if (part_attr & ZYNQ_ATTRIBUTE_PL_IMAGE_MASK) { |
| partition_num++; |
| continue; |
| } |
| |
| status = zynq_decrypt_load(part_load_addr, |
| part_img_len, |
| part_dst_addr, |
| part_data_len); |
| if (status != 0) { |
| printf("DECRYPTION_FAIL\n"); |
| return -1; |
| } |
| } |
| partition_num++; |
| } |
| |
| return 0; |
| } |
| |
| static int do_zynq_rsa(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| u32 src_ptr; |
| char *endp; |
| |
| src_ptr = simple_strtoul(argv[2], &endp, 16); |
| if (*argv[2] == 0 || *endp != 0) |
| return CMD_RET_USAGE; |
| if (zynq_verify_image(src_ptr)) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| #endif |
| |
| #ifdef CONFIG_CMD_ZYNQ_AES |
| static int zynq_decrypt_image(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| char *endp; |
| u32 srcaddr, srclen, dstaddr, dstlen; |
| int status; |
| |
| srcaddr = simple_strtoul(argv[2], &endp, 16); |
| if (*argv[2] == 0 || *endp != 0) |
| return CMD_RET_USAGE; |
| srclen = simple_strtoul(argv[3], &endp, 16); |
| if (*argv[3] == 0 || *endp != 0) |
| return CMD_RET_USAGE; |
| dstaddr = simple_strtoul(argv[4], &endp, 16); |
| if (*argv[4] == 0 || *endp != 0) |
| return CMD_RET_USAGE; |
| dstlen = simple_strtoul(argv[5], &endp, 16); |
| if (*argv[5] == 0 || *endp != 0) |
| return CMD_RET_USAGE; |
| |
| /* |
| * Roundup source and destination lengths to |
| * word size |
| */ |
| if (srclen % 4) |
| srclen = roundup(srclen, 4); |
| if (dstlen % 4) |
| dstlen = roundup(dstlen, 4); |
| |
| status = zynq_decrypt_load(srcaddr, srclen >> 2, dstaddr, dstlen >> 2); |
| if (status != 0) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| #endif |
| |
| static cmd_tbl_t zynq_commands[] = { |
| #ifdef CONFIG_CMD_ZYNQ_RSA |
| U_BOOT_CMD_MKENT(rsa, 3, 1, do_zynq_rsa, "", ""), |
| #endif |
| #ifdef CONFIG_CMD_ZYNQ_AES |
| U_BOOT_CMD_MKENT(aes, 6, 1, zynq_decrypt_image, "", ""), |
| #endif |
| }; |
| |
| static int do_zynq(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| cmd_tbl_t *zynq_cmd; |
| int ret; |
| |
| if (!ARRAY_SIZE(zynq_commands)) { |
| puts("No zynq specific command enabled\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| zynq_cmd = find_cmd_tbl(argv[1], zynq_commands, |
| ARRAY_SIZE(zynq_commands)); |
| if (!zynq_cmd || argc != zynq_cmd->maxargs) |
| return CMD_RET_USAGE; |
| |
| ret = zynq_cmd->cmd(zynq_cmd, flag, argc, argv); |
| |
| return cmd_process_error(zynq_cmd, ret); |
| } |
| |
| static char zynq_help_text[] = |
| "" |
| #ifdef CONFIG_CMD_ZYNQ_RSA |
| "rsa <baseaddr> - Verifies the authenticated and encrypted\n" |
| " zynq images and loads them back to load\n" |
| " addresses as specified in BOOT image(BOOT.BIN)\n" |
| #endif |
| #ifdef CONFIG_CMD_ZYNQ_AES |
| "aes <srcaddr> <srclen> <dstaddr> <dstlen>\n" |
| " - Decrypts the encrypted image present in source\n" |
| " address and places the decrypted image at\n" |
| " destination address\n" |
| #endif |
| ; |
| |
| U_BOOT_CMD(zynq, 6, 0, do_zynq, |
| "Zynq specific commands", zynq_help_text |
| ); |