| /* |
| * Altera SPI driver |
| * |
| * based on bfin_spi.c |
| * Copyright (c) 2005-2008 Analog Devices Inc. |
| * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| #include <common.h> |
| #include <asm/io.h> |
| #include <malloc.h> |
| #include <spi.h> |
| |
| #define ALTERA_SPI_RXDATA 0 |
| #define ALTERA_SPI_TXDATA 4 |
| #define ALTERA_SPI_STATUS 8 |
| #define ALTERA_SPI_CONTROL 12 |
| #define ALTERA_SPI_SLAVE_SEL 20 |
| |
| #define ALTERA_SPI_STATUS_ROE_MSK (0x8) |
| #define ALTERA_SPI_STATUS_TOE_MSK (0x10) |
| #define ALTERA_SPI_STATUS_TMT_MSK (0x20) |
| #define ALTERA_SPI_STATUS_TRDY_MSK (0x40) |
| #define ALTERA_SPI_STATUS_RRDY_MSK (0x80) |
| #define ALTERA_SPI_STATUS_E_MSK (0x100) |
| |
| #define ALTERA_SPI_CONTROL_IROE_MSK (0x8) |
| #define ALTERA_SPI_CONTROL_ITOE_MSK (0x10) |
| #define ALTERA_SPI_CONTROL_ITRDY_MSK (0x40) |
| #define ALTERA_SPI_CONTROL_IRRDY_MSK (0x80) |
| #define ALTERA_SPI_CONTROL_IE_MSK (0x100) |
| #define ALTERA_SPI_CONTROL_SSO_MSK (0x400) |
| |
| #ifndef CONFIG_SYS_ALTERA_SPI_LIST |
| #define CONFIG_SYS_ALTERA_SPI_LIST { CONFIG_SYS_SPI_BASE } |
| #endif |
| |
| static ulong altera_spi_base_list[] = CONFIG_SYS_ALTERA_SPI_LIST; |
| |
| struct altera_spi_slave { |
| struct spi_slave slave; |
| ulong base; |
| }; |
| #define to_altera_spi_slave(s) container_of(s, struct altera_spi_slave, slave) |
| |
| __attribute__((weak)) |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| { |
| return bus < ARRAY_SIZE(altera_spi_base_list) && cs < 32; |
| } |
| |
| __attribute__((weak)) |
| void spi_cs_activate(struct spi_slave *slave) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| writel(1 << slave->cs, altspi->base + ALTERA_SPI_SLAVE_SEL); |
| writel(ALTERA_SPI_CONTROL_SSO_MSK, altspi->base + ALTERA_SPI_CONTROL); |
| } |
| |
| __attribute__((weak)) |
| void spi_cs_deactivate(struct spi_slave *slave) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| writel(0, altspi->base + ALTERA_SPI_CONTROL); |
| writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); |
| } |
| |
| void spi_init(void) |
| { |
| } |
| |
| void spi_set_speed(struct spi_slave *slave, uint hz) |
| { |
| /* altera spi core does not support programmable speed */ |
| } |
| |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int mode) |
| { |
| struct altera_spi_slave *altspi; |
| |
| if (!spi_cs_is_valid(bus, cs)) |
| return NULL; |
| |
| altspi = spi_alloc_slave(struct altera_spi_slave, bus, cs); |
| if (!altspi) |
| return NULL; |
| |
| altspi->base = altera_spi_base_list[bus]; |
| debug("%s: bus:%i cs:%i base:%lx\n", __func__, |
| bus, cs, altspi->base); |
| |
| return &altspi->slave; |
| } |
| |
| void spi_free_slave(struct spi_slave *slave) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| free(altspi); |
| } |
| |
| int spi_claim_bus(struct spi_slave *slave) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); |
| writel(0, altspi->base + ALTERA_SPI_CONTROL); |
| writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); |
| return 0; |
| } |
| |
| void spi_release_bus(struct spi_slave *slave) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| |
| debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); |
| writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); |
| } |
| |
| #ifndef CONFIG_ALTERA_SPI_IDLE_VAL |
| # define CONFIG_ALTERA_SPI_IDLE_VAL 0xff |
| #endif |
| |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, |
| void *din, unsigned long flags) |
| { |
| struct altera_spi_slave *altspi = to_altera_spi_slave(slave); |
| /* assume spi core configured to do 8 bit transfers */ |
| uint bytes = bitlen / 8; |
| const uchar *txp = dout; |
| uchar *rxp = din; |
| |
| debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, |
| slave->bus, slave->cs, bitlen, bytes, flags); |
| if (bitlen == 0) |
| goto done; |
| |
| if (bitlen % 8) { |
| flags |= SPI_XFER_END; |
| goto done; |
| } |
| |
| /* empty read buffer */ |
| if (readl(altspi->base + ALTERA_SPI_STATUS) & |
| ALTERA_SPI_STATUS_RRDY_MSK) |
| readl(altspi->base + ALTERA_SPI_RXDATA); |
| if (flags & SPI_XFER_BEGIN) |
| spi_cs_activate(slave); |
| |
| while (bytes--) { |
| uchar d = txp ? *txp++ : CONFIG_ALTERA_SPI_IDLE_VAL; |
| debug("%s: tx:%x ", __func__, d); |
| writel(d, altspi->base + ALTERA_SPI_TXDATA); |
| while (!(readl(altspi->base + ALTERA_SPI_STATUS) & |
| ALTERA_SPI_STATUS_RRDY_MSK)) |
| ; |
| d = readl(altspi->base + ALTERA_SPI_RXDATA); |
| if (rxp) |
| *rxp++ = d; |
| debug("rx:%x\n", d); |
| } |
| done: |
| if (flags & SPI_XFER_END) |
| spi_cs_deactivate(slave); |
| |
| return 0; |
| } |