| /* |
| * (C) Copyright 2000-2005 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| |
| long int spd_sdram(void); |
| |
| int board_early_init_f(void) |
| { |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| mtdcr(uicer, 0x00000000); /* disable all ints */ |
| mtdcr(uiccr, 0x00000010); |
| mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */ |
| mtdcr(uictr, 0x00000010); /* set int trigger levels */ |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| |
| /* |
| * Configure CPC0_PCI to enable PerWE as output |
| * and enable the internal PCI arbiter if selected |
| */ |
| if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB) |
| mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); |
| else |
| mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN); |
| |
| return 0; |
| } |
| |
| /* |
| * Check Board Identity: |
| */ |
| int checkboard(void) |
| { |
| char *s = getenv("serial#"); |
| |
| puts("Board: Bubinga - AMCC PPC405EP Evaluation Board"); |
| |
| if (s != NULL) { |
| puts(", serial# "); |
| puts(s); |
| } |
| putc('\n'); |
| |
| return (0); |
| } |
| |
| /* ------------------------------------------------------------------------- |
| initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of |
| the necessary info for SDRAM controller configuration |
| ------------------------------------------------------------------------- */ |
| long int initdram(int board_type) |
| { |
| long int ret; |
| |
| ret = spd_sdram(); |
| return ret; |
| } |