| /* |
| * Copyright 2004,2007 Freescale Semiconductor, Inc. |
| * (C) Copyright 2002, 2003 Motorola Inc. |
| * Xianghua Xiao (X.Xiao@motorola.com) |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <asm/cache.h> |
| |
| #if defined(CONFIG_OF_FLAT_TREE) |
| #include <ft_build.h> |
| #endif |
| |
| |
| int checkcpu (void) |
| { |
| sys_info_t sysinfo; |
| uint lcrr; /* local bus clock ratio register */ |
| uint clkdiv; /* clock divider portion of lcrr */ |
| uint pvr, svr; |
| uint fam; |
| uint ver; |
| uint major, minor; |
| |
| svr = get_svr(); |
| ver = SVR_VER(svr); |
| major = SVR_MAJ(svr); |
| minor = SVR_MIN(svr); |
| |
| puts("CPU: "); |
| switch (ver) { |
| case SVR_8540: |
| puts("8540"); |
| break; |
| case SVR_8541: |
| puts("8541"); |
| break; |
| case SVR_8555: |
| puts("8555"); |
| break; |
| case SVR_8560: |
| puts("8560"); |
| break; |
| case SVR_8548: |
| puts("8548"); |
| break; |
| case SVR_8548_E: |
| puts("8548_E"); |
| break; |
| case SVR_8544: |
| puts("8544"); |
| break; |
| case SVR_8544_E: |
| puts("8544_E"); |
| break; |
| case SVR_8568_E: |
| puts("8568_E"); |
| break; |
| default: |
| puts("Unknown"); |
| break; |
| } |
| printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); |
| |
| pvr = get_pvr(); |
| fam = PVR_FAM(pvr); |
| ver = PVR_VER(pvr); |
| major = PVR_MAJ(pvr); |
| minor = PVR_MIN(pvr); |
| |
| printf("Core: "); |
| switch (fam) { |
| case PVR_FAM(PVR_85xx): |
| puts("E500"); |
| break; |
| default: |
| puts("Unknown"); |
| break; |
| } |
| printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); |
| |
| get_sys_info(&sysinfo); |
| |
| puts("Clock Configuration:\n"); |
| printf(" CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000); |
| printf("CCB:%4lu MHz,\n", sysinfo.freqSystemBus / 1000000); |
| printf(" DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000); |
| |
| #if defined(CFG_LBC_LCRR) |
| lcrr = CFG_LBC_LCRR; |
| #else |
| { |
| volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| volatile ccsr_lbc_t *lbc= &immap->im_lbc; |
| |
| lcrr = lbc->lcrr; |
| } |
| #endif |
| clkdiv = lcrr & 0x0f; |
| if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { |
| #if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) |
| /* |
| * Yes, the entire PQ38 family use the same |
| * bit-representation for twice the clock divider values. |
| */ |
| clkdiv *= 2; |
| #endif |
| printf("LBC:%4lu MHz\n", |
| sysinfo.freqSystemBus / 1000000 / clkdiv); |
| } else { |
| printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr); |
| } |
| |
| if (ver == SVR_8560) { |
| printf("CPM: %lu Mhz\n", |
| sysinfo.freqSystemBus / 1000000); |
| } |
| |
| puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); |
| |
| return 0; |
| } |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) |
| { |
| uint pvr; |
| uint ver; |
| pvr = get_pvr(); |
| ver = PVR_VER(pvr); |
| if (ver & 1){ |
| /* e500 v2 core has reset control register */ |
| volatile unsigned int * rstcr; |
| rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0); |
| *rstcr = 0x2; /* HRESET_REQ */ |
| }else{ |
| /* |
| * Initiate hard reset in debug control register DBCR0 |
| * Make sure MSR[DE] = 1 |
| */ |
| unsigned long val; |
| val = mfspr(DBCR0); |
| val |= 0x70000000; |
| mtspr(DBCR0,val); |
| } |
| return 1; |
| } |
| |
| |
| /* |
| * Get timebase clock frequency |
| */ |
| unsigned long get_tbclk (void) |
| { |
| |
| sys_info_t sys_info; |
| |
| get_sys_info(&sys_info); |
| return ((sys_info.freqSystemBus + 7L) / 8L); |
| } |
| |
| |
| #if defined(CONFIG_WATCHDOG) |
| void |
| watchdog_reset(void) |
| { |
| int re_enable = disable_interrupts(); |
| reset_85xx_watchdog(); |
| if (re_enable) enable_interrupts(); |
| } |
| |
| void |
| reset_85xx_watchdog(void) |
| { |
| /* |
| * Clear TSR(WIS) bit by writing 1 |
| */ |
| unsigned long val; |
| val = mfspr(SPRN_TSR); |
| val |= TSR_WIS; |
| mtspr(SPRN_TSR, val); |
| } |
| #endif /* CONFIG_WATCHDOG */ |
| |
| #if defined(CONFIG_DDR_ECC) |
| void dma_init(void) { |
| volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| |
| dma->satr0 = 0x02c40000; |
| dma->datr0 = 0x02c40000; |
| dma->sr0 = 0xfffffff; /* clear any errors */ |
| asm("sync; isync; msync"); |
| return; |
| } |
| |
| uint dma_check(void) { |
| volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| volatile uint status = dma->sr0; |
| |
| /* While the channel is busy, spin */ |
| while((status & 4) == 4) { |
| status = dma->sr0; |
| } |
| |
| /* clear MR0[CS] channel start bit */ |
| dma->mr0 &= 0x00000001; |
| asm("sync;isync;msync"); |
| |
| if (status != 0) { |
| printf ("DMA Error: status = %x\n", status); |
| } |
| return status; |
| } |
| |
| int dma_xfer(void *dest, uint count, void *src) { |
| volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| volatile ccsr_dma_t *dma = &immap->im_dma; |
| |
| dma->dar0 = (uint) dest; |
| dma->sar0 = (uint) src; |
| dma->bcr0 = count; |
| dma->mr0 = 0xf000004; |
| asm("sync;isync;msync"); |
| dma->mr0 = 0xf000005; |
| asm("sync;isync;msync"); |
| return dma_check(); |
| } |
| #endif |
| |
| |
| #ifdef CONFIG_OF_FLAT_TREE |
| void |
| ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| u32 *p; |
| ulong clock; |
| int len; |
| |
| clock = bd->bi_busfreq; |
| p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len); |
| if (p != NULL) |
| *p = cpu_to_be32(clock); |
| |
| #if defined(CONFIG_MPC85XX_TSEC1) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enetaddr, 6); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enetaddr, 6); |
| #endif |
| |
| #if defined(CONFIG_HAS_ETH1) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet1addr, 6); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet1addr, 6); |
| #endif |
| |
| #if defined(CONFIG_HAS_ETH2) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet2addr, 6); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet2addr, 6); |
| #endif |
| |
| #if defined(CONFIG_HAS_ETH3) |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet3addr, 6); |
| |
| p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len); |
| if (p) |
| memcpy(p, bd->bi_enet3addr, 6); |
| #endif |
| |
| } |
| #endif |