| /* |
| * (C) Copyright 2000-2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Andreas Heppel <aheppel@sysgo.de> |
| |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /************************************************************************** |
| * |
| * Support for persistent environment data |
| * |
| * The "environment" is stored as a list of '\0' terminated |
| * "name=value" strings. The end of the list is marked by a double |
| * '\0'. New entries are always added at the end. Deleting an entry |
| * shifts the remaining entries to the front. Replacing an entry is a |
| * combination of deleting the old value and adding the new one. |
| * |
| * The environment is preceeded by a 32 bit CRC over the data part. |
| * |
| ************************************************************************** |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <environment.h> |
| #if defined(CONFIG_CMD_EDITENV) |
| #include <malloc.h> |
| #endif |
| #include <watchdog.h> |
| #include <serial.h> |
| #include <linux/stddef.h> |
| #include <asm/byteorder.h> |
| #if defined(CONFIG_CMD_NET) |
| #include <net.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if !defined(CONFIG_ENV_IS_IN_EEPROM) && \ |
| !defined(CONFIG_ENV_IS_IN_FLASH) && \ |
| !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \ |
| !defined(CONFIG_ENV_IS_IN_MG_DISK) && \ |
| !defined(CONFIG_ENV_IS_IN_NAND) && \ |
| !defined(CONFIG_ENV_IS_IN_NVRAM) && \ |
| !defined(CONFIG_ENV_IS_IN_ONENAND) && \ |
| !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ |
| !defined(CONFIG_ENV_IS_NOWHERE) |
| # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\ |
| SPI_FLASH|MG_DISK|NVRAM|NOWHERE} |
| #endif |
| |
| #define XMK_STR(x) #x |
| #define MK_STR(x) XMK_STR(x) |
| |
| /************************************************************************ |
| ************************************************************************/ |
| |
| /* |
| * Table with supported baudrates (defined in config_xyz.h) |
| */ |
| static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; |
| #define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) |
| |
| /* |
| * This variable is incremented on each do_setenv (), so it can |
| * be used via get_env_id() as an indication, if the environment |
| * has changed or not. So it is possible to reread an environment |
| * variable only if the environment was changed ... done so for |
| * example in NetInitLoop() |
| */ |
| static int env_id = 1; |
| |
| int get_env_id (void) |
| { |
| return env_id; |
| } |
| /************************************************************************ |
| * Command interface: print one or all environment variables |
| */ |
| |
| /* |
| * state 0: finish printing this string and return (matched!) |
| * state 1: no matching to be done; print everything |
| * state 2: continue searching for matched name |
| */ |
| static int printenv(char *name, int state) |
| { |
| int i, j; |
| char c, buf[17]; |
| |
| i = 0; |
| buf[16] = '\0'; |
| |
| while (state && env_get_char(i) != '\0') { |
| if (state == 2 && envmatch((uchar *)name, i) >= 0) |
| state = 0; |
| |
| j = 0; |
| do { |
| buf[j++] = c = env_get_char(i++); |
| if (j == sizeof(buf) - 1) { |
| if (state <= 1) |
| puts(buf); |
| j = 0; |
| } |
| } while (c != '\0'); |
| |
| if (state <= 1) { |
| if (j) |
| puts(buf); |
| putc('\n'); |
| } |
| |
| if (ctrlc()) |
| return -1; |
| } |
| |
| if (state == 0) |
| i = 0; |
| return i; |
| } |
| |
| int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int i; |
| int rcode = 0; |
| |
| if (argc == 1) { |
| /* print all env vars */ |
| rcode = printenv(NULL, 1); |
| if (rcode < 0) |
| return 1; |
| printf("\nEnvironment size: %d/%ld bytes\n", |
| rcode, (ulong)ENV_SIZE); |
| return 0; |
| } |
| |
| /* print selected env vars */ |
| for (i = 1; i < argc; ++i) { |
| char *name = argv[i]; |
| if (printenv(name, 2)) { |
| printf("## Error: \"%s\" not defined\n", name); |
| ++rcode; |
| } |
| } |
| |
| return rcode; |
| } |
| |
| /************************************************************************ |
| * Set a new environment variable, |
| * or replace or delete an existing one. |
| * |
| * This function will ONLY work with a in-RAM copy of the environment |
| */ |
| |
| int _do_setenv (int flag, int argc, char * const argv[]) |
| { |
| int i, len, oldval; |
| int console = -1; |
| uchar *env, *nxt = NULL; |
| char *name; |
| bd_t *bd = gd->bd; |
| |
| uchar *env_data = env_get_addr(0); |
| |
| if (!env_data) /* need copy in RAM */ |
| return 1; |
| |
| name = argv[1]; |
| |
| if (strchr(name, '=')) { |
| printf ("## Error: illegal character '=' in variable name \"%s\"\n", name); |
| return 1; |
| } |
| |
| env_id++; |
| /* |
| * search if variable with this name already exists |
| */ |
| oldval = -1; |
| for (env=env_data; *env; env=nxt+1) { |
| for (nxt=env; *nxt; ++nxt) |
| ; |
| if ((oldval = envmatch((uchar *)name, env-env_data)) >= 0) |
| break; |
| } |
| |
| /* Check for console redirection */ |
| if (strcmp(name,"stdin") == 0) { |
| console = stdin; |
| } else if (strcmp(name,"stdout") == 0) { |
| console = stdout; |
| } else if (strcmp(name,"stderr") == 0) { |
| console = stderr; |
| } |
| |
| if (console != -1) { |
| if (argc < 3) { /* Cannot delete it! */ |
| printf("Can't delete \"%s\"\n", name); |
| return 1; |
| } |
| |
| #ifdef CONFIG_CONSOLE_MUX |
| i = iomux_doenv(console, argv[2]); |
| if (i) |
| return i; |
| #else |
| /* Try assigning specified device */ |
| if (console_assign (console, argv[2]) < 0) |
| return 1; |
| |
| #ifdef CONFIG_SERIAL_MULTI |
| if (serial_assign (argv[2]) < 0) |
| return 1; |
| #endif |
| #endif /* CONFIG_CONSOLE_MUX */ |
| } |
| |
| /* |
| * Delete any existing definition |
| */ |
| if (oldval >= 0) { |
| #ifndef CONFIG_ENV_OVERWRITE |
| |
| /* |
| * Ethernet Address and serial# can be set only once, |
| * ver is readonly. |
| */ |
| if ( |
| #ifdef CONFIG_HAS_UID |
| /* Allow serial# forced overwrite with 0xdeaf4add flag */ |
| ((strcmp (name, "serial#") == 0) && (flag != 0xdeaf4add)) || |
| #else |
| (strcmp (name, "serial#") == 0) || |
| #endif |
| ((strcmp (name, "ethaddr") == 0) |
| #if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR) |
| && (strcmp ((char *)env_get_addr(oldval),MK_STR(CONFIG_ETHADDR)) != 0) |
| #endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */ |
| ) ) { |
| printf ("Can't overwrite \"%s\"\n", name); |
| return 1; |
| } |
| #endif |
| |
| /* |
| * Switch to new baudrate if new baudrate is supported |
| */ |
| if (strcmp(argv[1],"baudrate") == 0) { |
| int baudrate = simple_strtoul(argv[2], NULL, 10); |
| int i; |
| for (i=0; i<N_BAUDRATES; ++i) { |
| if (baudrate == baudrate_table[i]) |
| break; |
| } |
| if (i == N_BAUDRATES) { |
| printf ("## Baudrate %d bps not supported\n", |
| baudrate); |
| return 1; |
| } |
| printf ("## Switch baudrate to %d bps and press ENTER ...\n", |
| baudrate); |
| udelay(50000); |
| gd->baudrate = baudrate; |
| #if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2) |
| gd->bd->bi_baudrate = baudrate; |
| #endif |
| |
| serial_setbrg (); |
| udelay(50000); |
| for (;;) { |
| if (getc() == '\r') |
| break; |
| } |
| } |
| |
| if (*++nxt == '\0') { |
| if (env > env_data) { |
| env--; |
| } else { |
| *env = '\0'; |
| } |
| } else { |
| for (;;) { |
| *env = *nxt++; |
| if ((*env == '\0') && (*nxt == '\0')) |
| break; |
| ++env; |
| } |
| } |
| *++env = '\0'; |
| } |
| |
| /* Delete only ? */ |
| if ((argc < 3) || argv[2] == NULL) { |
| env_crc_update (); |
| return 0; |
| } |
| |
| /* |
| * Append new definition at the end |
| */ |
| for (env=env_data; *env || *(env+1); ++env) |
| ; |
| if (env > env_data) |
| ++env; |
| /* |
| * Overflow when: |
| * "name" + "=" + "val" +"\0\0" > ENV_SIZE - (env-env_data) |
| */ |
| len = strlen(name) + 2; |
| /* add '=' for first arg, ' ' for all others */ |
| for (i=2; i<argc; ++i) { |
| len += strlen(argv[i]) + 1; |
| } |
| if (len > (&env_data[ENV_SIZE]-env)) { |
| printf ("## Error: environment overflow, \"%s\" deleted\n", name); |
| return 1; |
| } |
| while ((*env = *name++) != '\0') |
| env++; |
| for (i=2; i<argc; ++i) { |
| char *val = argv[i]; |
| |
| *env = (i==2) ? '=' : ' '; |
| while ((*++env = *val++) != '\0') |
| ; |
| } |
| |
| /* end is marked with double '\0' */ |
| *++env = '\0'; |
| |
| /* Update CRC */ |
| env_crc_update (); |
| |
| /* |
| * Some variables should be updated when the corresponding |
| * entry in the enviornment is changed |
| */ |
| |
| if (strcmp(argv[1],"ethaddr") == 0) |
| return 0; |
| |
| if (strcmp(argv[1],"ipaddr") == 0) { |
| char *s = argv[2]; /* always use only one arg */ |
| char *e; |
| unsigned long addr; |
| bd->bi_ip_addr = 0; |
| for (addr=0, i=0; i<4; ++i) { |
| ulong val = s ? simple_strtoul(s, &e, 10) : 0; |
| addr <<= 8; |
| addr |= (val & 0xFF); |
| if (s) s = (*e) ? e+1 : e; |
| } |
| bd->bi_ip_addr = htonl(addr); |
| return 0; |
| } |
| if (strcmp(argv[1],"loadaddr") == 0) { |
| load_addr = simple_strtoul(argv[2], NULL, 16); |
| return 0; |
| } |
| #if defined(CONFIG_CMD_NET) |
| if (strcmp(argv[1],"bootfile") == 0) { |
| copy_filename (BootFile, argv[2], sizeof(BootFile)); |
| return 0; |
| } |
| #endif |
| return 0; |
| } |
| |
| int setenv (char *varname, char *varvalue) |
| { |
| char * const argv[4] = { "setenv", varname, varvalue, NULL }; |
| if ((varvalue == NULL) || (varvalue[0] == '\0')) |
| return _do_setenv (0, 2, argv); |
| else |
| return _do_setenv (0, 3, argv); |
| } |
| |
| #ifdef CONFIG_HAS_UID |
| void forceenv (char *varname, char *varvalue) |
| { |
| char * const argv[4] = { "forceenv", varname, varvalue, NULL }; |
| _do_setenv (0xdeaf4add, 3, argv); |
| } |
| #endif |
| |
| int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| return _do_setenv (flag, argc, argv); |
| } |
| |
| /************************************************************************ |
| * Prompt for environment variable |
| */ |
| |
| #if defined(CONFIG_CMD_ASKENV) |
| int do_askenv ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| extern char console_buffer[CONFIG_SYS_CBSIZE]; |
| char message[CONFIG_SYS_CBSIZE]; |
| int size = CONFIG_SYS_CBSIZE - 1; |
| int len; |
| char *local_args[4]; |
| |
| local_args[0] = argv[0]; |
| local_args[1] = argv[1]; |
| local_args[2] = NULL; |
| local_args[3] = NULL; |
| |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| /* Check the syntax */ |
| switch (argc) { |
| case 1: |
| return cmd_usage(cmdtp); |
| |
| case 2: /* askenv envname */ |
| sprintf (message, "Please enter '%s':", argv[1]); |
| break; |
| |
| case 3: /* askenv envname size */ |
| sprintf (message, "Please enter '%s':", argv[1]); |
| size = simple_strtoul (argv[2], NULL, 10); |
| break; |
| |
| default: /* askenv envname message1 ... messagen size */ |
| { |
| int i; |
| int pos = 0; |
| |
| for (i = 2; i < argc - 1; i++) { |
| if (pos) { |
| message[pos++] = ' '; |
| } |
| strcpy (message+pos, argv[i]); |
| pos += strlen(argv[i]); |
| } |
| message[pos] = '\0'; |
| size = simple_strtoul (argv[argc - 1], NULL, 10); |
| } |
| break; |
| } |
| |
| if (size >= CONFIG_SYS_CBSIZE) |
| size = CONFIG_SYS_CBSIZE - 1; |
| |
| if (size <= 0) |
| return 1; |
| |
| /* prompt for input */ |
| len = readline (message); |
| |
| if (size < len) |
| console_buffer[size] = '\0'; |
| |
| len = 2; |
| if (console_buffer[0] != '\0') { |
| local_args[2] = console_buffer; |
| len = 3; |
| } |
| |
| /* Continue calling setenv code */ |
| return _do_setenv (flag, len, local_args); |
| } |
| #endif |
| |
| /************************************************************************ |
| * Interactively edit an environment variable |
| */ |
| #if defined(CONFIG_CMD_EDITENV) |
| int do_editenv(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| char buffer[CONFIG_SYS_CBSIZE]; |
| char *init_val; |
| int len; |
| |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| /* Set read buffer to initial value or empty sting */ |
| init_val = getenv(argv[1]); |
| if (init_val) |
| len = sprintf(buffer, "%s", init_val); |
| else |
| buffer[0] = '\0'; |
| |
| readline_into_buffer("edit: ", buffer); |
| |
| return setenv(argv[1], buffer); |
| } |
| #endif /* CONFIG_CMD_EDITENV */ |
| |
| /************************************************************************ |
| * Look up variable from environment, |
| * return address of storage for that variable, |
| * or NULL if not found |
| */ |
| |
| char *getenv (char *name) |
| { |
| int i, nxt; |
| |
| WATCHDOG_RESET(); |
| |
| for (i=0; env_get_char(i) != '\0'; i=nxt+1) { |
| int val; |
| |
| for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) { |
| if (nxt >= CONFIG_ENV_SIZE) { |
| return (NULL); |
| } |
| } |
| if ((val=envmatch((uchar *)name, i)) < 0) |
| continue; |
| return ((char *)env_get_addr(val)); |
| } |
| |
| return (NULL); |
| } |
| |
| int getenv_f(char *name, char *buf, unsigned len) |
| { |
| int i, nxt; |
| |
| for (i=0; env_get_char(i) != '\0'; i=nxt+1) { |
| int val, n; |
| |
| for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) { |
| if (nxt >= CONFIG_ENV_SIZE) { |
| return (-1); |
| } |
| } |
| if ((val=envmatch((uchar *)name, i)) < 0) |
| continue; |
| |
| /* found; copy out */ |
| for (n=0; n<len; ++n, ++buf) { |
| if ((*buf = env_get_char(val++)) == '\0') |
| return n; |
| } |
| |
| if (n) |
| *--buf = '\0'; |
| |
| printf("env_buf too small [%d]\n", len); |
| |
| return n; |
| } |
| return (-1); |
| } |
| |
| #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) |
| |
| int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| extern char * env_name_spec; |
| |
| printf ("Saving Environment to %s...\n", env_name_spec); |
| |
| return (saveenv() ? 1 : 0); |
| } |
| |
| U_BOOT_CMD( |
| saveenv, 1, 0, do_saveenv, |
| "save environment variables to persistent storage", |
| "" |
| ); |
| |
| #endif |
| |
| |
| /************************************************************************ |
| * Match a name / name=value pair |
| * |
| * s1 is either a simple 'name', or a 'name=value' pair. |
| * i2 is the environment index for a 'name2=value2' pair. |
| * If the names match, return the index for the value2, else NULL. |
| */ |
| |
| int envmatch (uchar *s1, int i2) |
| { |
| |
| while (*s1 == env_get_char(i2++)) |
| if (*s1++ == '=') |
| return(i2); |
| if (*s1 == '\0' && env_get_char(i2-1) == '=') |
| return(i2); |
| return(-1); |
| } |
| |
| |
| /**************************************************/ |
| |
| #if defined(CONFIG_CMD_EDITENV) |
| U_BOOT_CMD( |
| editenv, 2, 0, do_editenv, |
| "edit environment variable", |
| "name\n" |
| " - edit environment variable 'name'" |
| ); |
| #endif |
| |
| U_BOOT_CMD( |
| printenv, CONFIG_SYS_MAXARGS, 1, do_printenv, |
| "print environment variables", |
| "\n - print values of all environment variables\n" |
| "printenv name ...\n" |
| " - print value of environment variable 'name'" |
| ); |
| |
| U_BOOT_CMD( |
| setenv, CONFIG_SYS_MAXARGS, 0, do_setenv, |
| "set environment variables", |
| "name value ...\n" |
| " - set environment variable 'name' to 'value ...'\n" |
| "setenv name\n" |
| " - delete environment variable 'name'" |
| ); |
| |
| #if defined(CONFIG_CMD_ASKENV) |
| |
| U_BOOT_CMD( |
| askenv, CONFIG_SYS_MAXARGS, 1, do_askenv, |
| "get environment variables from stdin", |
| "name [message] [size]\n" |
| " - get environment variable 'name' from stdin (max 'size' chars)\n" |
| "askenv name\n" |
| " - get environment variable 'name' from stdin\n" |
| "askenv name size\n" |
| " - get environment variable 'name' from stdin (max 'size' chars)\n" |
| "askenv name [message] size\n" |
| " - display 'message' string and get environment variable 'name'" |
| "from stdin (max 'size' chars)" |
| ); |
| #endif |
| |
| #if defined(CONFIG_CMD_RUN) |
| int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); |
| U_BOOT_CMD( |
| run, CONFIG_SYS_MAXARGS, 1, do_run, |
| "run commands in an environment variable", |
| "var [...]\n" |
| " - run the commands in the environment variable(s) 'var'" |
| ); |
| #endif |