| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2016 Rockchip Electronics Co., Ltd |
| * Author: Andy Yan <andy.yan@rock-chips.com> |
| */ |
| |
| #include <common.h> |
| #include <bitfield.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru_rv1108.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <dm/lists.h> |
| #include <dt-bindings/clock/rv1108-cru.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| enum { |
| VCO_MAX_HZ = 2400U * 1000000, |
| VCO_MIN_HZ = 600 * 1000000, |
| OUTPUT_MAX_HZ = 2400U * 1000000, |
| OUTPUT_MIN_HZ = 24 * 1000000, |
| }; |
| |
| #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) |
| |
| #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ |
| .refdiv = _refdiv,\ |
| .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ |
| .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\ |
| _Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) *\ |
| OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz,\ |
| #hz "Hz cannot be hit with PLL "\ |
| "divisors on line " __stringify(__LINE__)); |
| |
| static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1); |
| static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); |
| |
| /* use integer mode */ |
| static inline int rv1108_pll_id(enum rk_clk_id clk_id) |
| { |
| int id = 0; |
| |
| switch (clk_id) { |
| case CLK_ARM: |
| case CLK_DDR: |
| id = clk_id - 1; |
| break; |
| case CLK_GENERAL: |
| id = 2; |
| break; |
| default: |
| printf("invalid pll id:%d\n", clk_id); |
| id = -1; |
| break; |
| } |
| |
| return id; |
| } |
| |
| static int rkclk_set_pll(struct rv1108_cru *cru, enum rk_clk_id clk_id, |
| const struct pll_div *div) |
| { |
| int pll_id = rv1108_pll_id(clk_id); |
| struct rv1108_pll *pll = &cru->pll[pll_id]; |
| |
| /* All PLLs have same VCO and output frequency range restrictions. */ |
| uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000; |
| uint output_hz = vco_hz / div->postdiv1 / div->postdiv2; |
| |
| debug("PLL at %p: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n", |
| pll, div->fbdiv, div->refdiv, div->postdiv1, |
| div->postdiv2, vco_hz, output_hz); |
| assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ && |
| output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ); |
| |
| /* |
| * When power on or changing PLL setting, |
| * we must force PLL into slow mode to ensure output stable clock. |
| */ |
| rk_clrsetreg(&pll->con3, WORK_MODE_MASK, |
| WORK_MODE_SLOW << WORK_MODE_SHIFT); |
| |
| /* use integer mode */ |
| rk_setreg(&pll->con3, 1 << DSMPD_SHIFT); |
| /* Power down */ |
| rk_setreg(&pll->con3, 1 << GLOBAL_POWER_DOWN_SHIFT); |
| |
| rk_clrsetreg(&pll->con0, FBDIV_MASK, div->fbdiv << FBDIV_SHIFT); |
| rk_clrsetreg(&pll->con1, POSTDIV1_MASK | POSTDIV2_MASK | REFDIV_MASK, |
| (div->postdiv1 << POSTDIV1_SHIFT | |
| div->postdiv2 << POSTDIV2_SHIFT | |
| div->refdiv << REFDIV_SHIFT)); |
| rk_clrsetreg(&pll->con2, FRACDIV_MASK, |
| (div->refdiv << REFDIV_SHIFT)); |
| |
| /* Power Up */ |
| rk_clrreg(&pll->con3, 1 << GLOBAL_POWER_DOWN_SHIFT); |
| |
| /* waiting for pll lock */ |
| while (readl(&pll->con2) & (1 << LOCK_STA_SHIFT)) |
| udelay(1); |
| |
| /* |
| * set PLL into normal mode. |
| */ |
| rk_clrsetreg(&pll->con3, WORK_MODE_MASK, |
| WORK_MODE_NORMAL << WORK_MODE_SHIFT); |
| |
| return 0; |
| } |
| |
| static uint32_t rkclk_pll_get_rate(struct rv1108_cru *cru, |
| enum rk_clk_id clk_id) |
| { |
| uint32_t refdiv, fbdiv, postdiv1, postdiv2; |
| uint32_t con0, con1, con3; |
| int pll_id = rv1108_pll_id(clk_id); |
| struct rv1108_pll *pll = &cru->pll[pll_id]; |
| uint32_t freq; |
| |
| con3 = readl(&pll->con3); |
| |
| if (con3 & WORK_MODE_MASK) { |
| con0 = readl(&pll->con0); |
| con1 = readl(&pll->con1); |
| fbdiv = (con0 >> FBDIV_SHIFT) & FBDIV_MASK; |
| postdiv1 = (con1 & POSTDIV1_MASK) >> POSTDIV1_SHIFT; |
| postdiv2 = (con1 & POSTDIV2_MASK) >> POSTDIV2_SHIFT; |
| refdiv = (con1 >> REFDIV_SHIFT) & REFDIV_MASK; |
| freq = (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000; |
| } else { |
| freq = OSC_HZ; |
| } |
| |
| return freq; |
| } |
| |
| static int rv1108_mac_set_clk(struct rv1108_cru *cru, ulong rate) |
| { |
| uint32_t con = readl(&cru->clksel_con[24]); |
| ulong pll_rate; |
| uint8_t div; |
| |
| if ((con >> MAC_PLL_SEL_SHIFT) & MAC_PLL_SEL_GPLL) |
| pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| else |
| pll_rate = rkclk_pll_get_rate(cru, CLK_ARM); |
| |
| /*default set 50MHZ for gmac*/ |
| if (!rate) |
| rate = 50000000; |
| |
| div = DIV_ROUND_UP(pll_rate, rate) - 1; |
| if (div <= 0x1f) |
| rk_clrsetreg(&cru->clksel_con[24], MAC_CLK_DIV_MASK, |
| div << MAC_CLK_DIV_SHIFT); |
| else |
| debug("Unsupported div for gmac:%d\n", div); |
| |
| return DIV_TO_RATE(pll_rate, div); |
| } |
| |
| static int rv1108_sfc_set_clk(struct rv1108_cru *cru, uint rate) |
| { |
| u32 con = readl(&cru->clksel_con[27]); |
| u32 pll_rate; |
| u32 div; |
| |
| if ((con >> SFC_PLL_SEL_SHIFT) && SFC_PLL_SEL_GPLL) |
| pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| else |
| pll_rate = rkclk_pll_get_rate(cru, CLK_DDR); |
| |
| div = DIV_ROUND_UP(pll_rate, rate) - 1; |
| if (div <= 0x3f) |
| rk_clrsetreg(&cru->clksel_con[27], SFC_CLK_DIV_MASK, |
| div << SFC_CLK_DIV_SHIFT); |
| else |
| debug("Unsupported sfc clk rate:%d\n", rate); |
| |
| return DIV_TO_RATE(pll_rate, div); |
| } |
| |
| static ulong rv1108_saradc_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[22]); |
| div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT, |
| CLK_SARADC_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(OSC_HZ, div); |
| } |
| |
| static ulong rv1108_saradc_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1; |
| assert(src_clk_div < 128); |
| |
| rk_clrsetreg(&cru->clksel_con[22], |
| CLK_SARADC_DIV_CON_MASK, |
| src_clk_div << CLK_SARADC_DIV_CON_SHIFT); |
| |
| return rv1108_saradc_get_clk(cru); |
| } |
| |
| static ulong rv1108_aclk_vio1_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[28]); |
| div = bitfield_extract(val, ACLK_VIO1_CLK_DIV_SHIFT, |
| CLK_VIO_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rv1108_aclk_vio1_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[28], |
| ACLK_VIO1_CLK_DIV_MASK | ACLK_VIO1_PLL_SEL_MASK, |
| (src_clk_div << ACLK_VIO1_CLK_DIV_SHIFT) | |
| (VIO_PLL_SEL_GPLL << ACLK_VIO1_PLL_SEL_SHIFT)); |
| |
| return rv1108_aclk_vio1_get_clk(cru); |
| } |
| |
| static ulong rv1108_aclk_vio0_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[28]); |
| div = bitfield_extract(val, ACLK_VIO0_CLK_DIV_SHIFT, |
| CLK_VIO_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rv1108_aclk_vio0_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[28], |
| ACLK_VIO0_CLK_DIV_MASK | ACLK_VIO0_PLL_SEL_MASK, |
| (src_clk_div << ACLK_VIO0_CLK_DIV_SHIFT) | |
| (VIO_PLL_SEL_GPLL << ACLK_VIO0_PLL_SEL_SHIFT)); |
| |
| /*HCLK_VIO default div = 4*/ |
| rk_clrsetreg(&cru->clksel_con[29], |
| HCLK_VIO_CLK_DIV_MASK, |
| 3 << HCLK_VIO_CLK_DIV_SHIFT); |
| /*PCLK_VIO default div = 4*/ |
| rk_clrsetreg(&cru->clksel_con[29], |
| PCLK_VIO_CLK_DIV_MASK, |
| 3 << PCLK_VIO_CLK_DIV_SHIFT); |
| |
| return rv1108_aclk_vio0_get_clk(cru); |
| } |
| |
| static ulong rv1108_dclk_vop_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| |
| val = readl(&cru->clksel_con[32]); |
| div = bitfield_extract(val, DCLK_VOP_CLK_DIV_SHIFT, |
| DCLK_VOP_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rv1108_dclk_vop_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| |
| src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; |
| assert(src_clk_div < 64); |
| |
| rk_clrsetreg(&cru->clksel_con[32], |
| DCLK_VOP_CLK_DIV_MASK | DCLK_VOP_PLL_SEL_MASK | |
| DCLK_VOP_SEL_SHIFT, |
| (src_clk_div << DCLK_VOP_CLK_DIV_SHIFT) | |
| (DCLK_VOP_PLL_SEL_GPLL << DCLK_VOP_PLL_SEL_SHIFT) | |
| (DCLK_VOP_SEL_PLL << DCLK_VOP_SEL_SHIFT)); |
| |
| return rv1108_dclk_vop_get_clk(cru); |
| } |
| |
| static ulong rv1108_aclk_bus_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| val = readl(&cru->clksel_con[2]); |
| div = bitfield_extract(val, ACLK_BUS_DIV_CON_SHIFT, |
| ACLK_BUS_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(parent_rate, div); |
| } |
| |
| static ulong rv1108_aclk_bus_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| src_clk_div = DIV_ROUND_UP(parent_rate, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[2], |
| ACLK_BUS_DIV_CON_MASK | ACLK_BUS_PLL_SEL_MASK, |
| (src_clk_div << ACLK_BUS_DIV_CON_SHIFT) | |
| (ACLK_BUS_PLL_SEL_GPLL << ACLK_BUS_PLL_SEL_SHIFT)); |
| |
| return rv1108_aclk_bus_get_clk(cru); |
| } |
| |
| static ulong rv1108_aclk_peri_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| val = readl(&cru->clksel_con[23]); |
| div = bitfield_extract(val, ACLK_PERI_DIV_CON_SHIFT, |
| PERI_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(parent_rate, div); |
| } |
| |
| static ulong rv1108_hclk_peri_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| val = readl(&cru->clksel_con[23]); |
| div = bitfield_extract(val, HCLK_PERI_DIV_CON_SHIFT, |
| PERI_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(parent_rate, div); |
| } |
| |
| static ulong rv1108_pclk_peri_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, val; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| val = readl(&cru->clksel_con[23]); |
| div = bitfield_extract(val, PCLK_PERI_DIV_CON_SHIFT, |
| PERI_DIV_CON_WIDTH); |
| |
| return DIV_TO_RATE(parent_rate, div); |
| } |
| |
| static ulong rv1108_aclk_peri_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| src_clk_div = DIV_ROUND_UP(parent_rate, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[23], |
| ACLK_PERI_DIV_CON_MASK | ACLK_PERI_PLL_SEL_MASK, |
| (src_clk_div << ACLK_PERI_DIV_CON_SHIFT) | |
| (ACLK_PERI_PLL_SEL_GPLL << ACLK_PERI_PLL_SEL_SHIFT)); |
| |
| return rv1108_aclk_peri_get_clk(cru); |
| } |
| |
| static ulong rv1108_hclk_peri_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| src_clk_div = DIV_ROUND_UP(parent_rate, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[23], |
| HCLK_PERI_DIV_CON_MASK, |
| (src_clk_div << HCLK_PERI_DIV_CON_SHIFT)); |
| |
| return rv1108_hclk_peri_get_clk(cru); |
| } |
| |
| static ulong rv1108_pclk_peri_set_clk(struct rv1108_cru *cru, uint hz) |
| { |
| int src_clk_div; |
| ulong parent_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| src_clk_div = DIV_ROUND_UP(parent_rate, hz) - 1; |
| assert(src_clk_div < 32); |
| |
| rk_clrsetreg(&cru->clksel_con[23], |
| PCLK_PERI_DIV_CON_MASK, |
| (src_clk_div << PCLK_PERI_DIV_CON_SHIFT)); |
| |
| return rv1108_pclk_peri_get_clk(cru); |
| } |
| |
| static ulong rv1108_i2c_get_clk(struct rv1108_cru *cru, ulong clk_id) |
| { |
| u32 div, con; |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| con = readl(&cru->clksel_con[19]); |
| div = bitfield_extract(con, CLK_I2C0_DIV_CON_SHIFT, |
| I2C_DIV_CON_WIDTH); |
| break; |
| case SCLK_I2C1: |
| con = readl(&cru->clksel_con[19]); |
| div = bitfield_extract(con, CLK_I2C1_DIV_CON_SHIFT, |
| I2C_DIV_CON_WIDTH); |
| break; |
| case SCLK_I2C2: |
| con = readl(&cru->clksel_con[20]); |
| div = bitfield_extract(con, CLK_I2C2_DIV_CON_SHIFT, |
| I2C_DIV_CON_WIDTH); |
| break; |
| case SCLK_I2C3: |
| con = readl(&cru->clksel_con[20]); |
| div = bitfield_extract(con, CLK_I2C3_DIV_CON_SHIFT, |
| I2C_DIV_CON_WIDTH); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return DIV_TO_RATE(GPLL_HZ, div); |
| } |
| |
| static ulong rv1108_i2c_set_clk(struct rv1108_cru *cru, ulong clk_id, uint hz) |
| { |
| int src_clk_div; |
| |
| /* i2c0,4,8 src clock from ppll, i2c1,2,3,5,6,7 src clock from gpll*/ |
| src_clk_div = GPLL_HZ / hz; |
| assert(src_clk_div - 1 <= 127); |
| |
| switch (clk_id) { |
| case SCLK_I2C0_PMU: |
| rk_clrsetreg(&cru->clksel_con[19], |
| CLK_I2C0_DIV_CON_MASK | CLK_I2C1_PLL_SEL_MASK, |
| (src_clk_div << CLK_I2C0_DIV_CON_SHIFT) | |
| (CLK_I2C1_PLL_SEL_GPLL << CLK_I2C1_PLL_SEL_SHIFT)); |
| break; |
| case SCLK_I2C1: |
| rk_clrsetreg(&cru->clksel_con[19], |
| CLK_I2C1_DIV_CON_MASK | CLK_I2C1_PLL_SEL_MASK, |
| (src_clk_div << CLK_I2C1_DIV_CON_SHIFT) | |
| (CLK_I2C1_PLL_SEL_GPLL << CLK_I2C1_PLL_SEL_SHIFT)); |
| break; |
| case SCLK_I2C2: |
| rk_clrsetreg(&cru->clksel_con[20], |
| CLK_I2C2_DIV_CON_MASK | CLK_I2C3_PLL_SEL_MASK, |
| (src_clk_div << CLK_I2C2_DIV_CON_SHIFT) | |
| (CLK_I2C3_PLL_SEL_GPLL << CLK_I2C3_PLL_SEL_SHIFT)); |
| break; |
| case SCLK_I2C3: |
| rk_clrsetreg(&cru->clksel_con[20], |
| CLK_I2C3_DIV_CON_MASK | CLK_I2C3_PLL_SEL_MASK, |
| (src_clk_div << CLK_I2C3_DIV_CON_SHIFT) | |
| (CLK_I2C3_PLL_SEL_GPLL << CLK_I2C3_PLL_SEL_SHIFT)); |
| break; |
| default: |
| printf("do not support this i2c bus\n"); |
| return -EINVAL; |
| } |
| |
| return rv1108_i2c_get_clk(cru, clk_id); |
| } |
| |
| static ulong rv1108_mmc_get_clk(struct rv1108_cru *cru) |
| { |
| u32 div, con; |
| ulong mmc_clk; |
| |
| con = readl(&cru->clksel_con[26]); |
| div = bitfield_extract(con, EMMC_CLK_DIV_SHIFT, 8); |
| |
| con = readl(&cru->clksel_con[25]); |
| |
| if ((con & EMMC_PLL_SEL_MASK) >> EMMC_PLL_SEL_SHIFT == EMMC_PLL_SEL_OSC) |
| mmc_clk = DIV_TO_RATE(OSC_HZ, div) / 2; |
| else |
| mmc_clk = DIV_TO_RATE(GPLL_HZ, div) / 2; |
| |
| debug("%s div %d get_clk %ld\n", __func__, div, mmc_clk); |
| return mmc_clk; |
| } |
| |
| static ulong rv1108_mmc_set_clk(struct rv1108_cru *cru, ulong rate) |
| { |
| int div; |
| u32 pll_rate; |
| |
| div = DIV_ROUND_UP(rkclk_pll_get_rate(cru, CLK_GENERAL), rate); |
| |
| if (div < 127) { |
| debug("%s source gpll\n", __func__); |
| rk_clrsetreg(&cru->clksel_con[25], EMMC_PLL_SEL_MASK, |
| (EMMC_PLL_SEL_GPLL << EMMC_PLL_SEL_SHIFT)); |
| pll_rate = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| } else { |
| debug("%s source 24m\n", __func__); |
| rk_clrsetreg(&cru->clksel_con[25], EMMC_PLL_SEL_MASK, |
| (EMMC_PLL_SEL_OSC << EMMC_PLL_SEL_SHIFT)); |
| pll_rate = OSC_HZ; |
| } |
| |
| div = DIV_ROUND_UP(pll_rate / 2, rate); |
| rk_clrsetreg(&cru->clksel_con[26], EMMC_CLK_DIV_MASK, |
| ((div - 1) << EMMC_CLK_DIV_SHIFT)); |
| |
| debug("%s set_rate %ld div %d\n", __func__, rate, div); |
| |
| return DIV_TO_RATE(pll_rate, div); |
| } |
| |
| static ulong rv1108_clk_get_rate(struct clk *clk) |
| { |
| struct rv1108_clk_priv *priv = dev_get_priv(clk->dev); |
| |
| switch (clk->id) { |
| case 0 ... 63: |
| return rkclk_pll_get_rate(priv->cru, clk->id); |
| case SCLK_SARADC: |
| return rv1108_saradc_get_clk(priv->cru); |
| case ACLK_VIO0: |
| return rv1108_aclk_vio0_get_clk(priv->cru); |
| case ACLK_VIO1: |
| return rv1108_aclk_vio1_get_clk(priv->cru); |
| case DCLK_VOP: |
| return rv1108_dclk_vop_get_clk(priv->cru); |
| case ACLK_PRE: |
| return rv1108_aclk_bus_get_clk(priv->cru); |
| case ACLK_PERI: |
| return rv1108_aclk_peri_get_clk(priv->cru); |
| case HCLK_PERI: |
| return rv1108_hclk_peri_get_clk(priv->cru); |
| case PCLK_PERI: |
| return rv1108_pclk_peri_get_clk(priv->cru); |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| return rv1108_i2c_get_clk(priv->cru, clk->id); |
| case HCLK_EMMC: |
| case SCLK_EMMC: |
| case SCLK_EMMC_SAMPLE: |
| return rv1108_mmc_get_clk(priv->cru); |
| default: |
| return -ENOENT; |
| } |
| } |
| |
| static ulong rv1108_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct rv1108_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong new_rate; |
| |
| switch (clk->id) { |
| case SCLK_MAC: |
| new_rate = rv1108_mac_set_clk(priv->cru, rate); |
| break; |
| case SCLK_SFC: |
| new_rate = rv1108_sfc_set_clk(priv->cru, rate); |
| break; |
| case SCLK_SARADC: |
| new_rate = rv1108_saradc_set_clk(priv->cru, rate); |
| break; |
| case ACLK_VIO0: |
| new_rate = rv1108_aclk_vio0_set_clk(priv->cru, rate); |
| break; |
| case ACLK_VIO1: |
| new_rate = rv1108_aclk_vio1_set_clk(priv->cru, rate); |
| break; |
| case DCLK_VOP: |
| new_rate = rv1108_dclk_vop_set_clk(priv->cru, rate); |
| break; |
| case ACLK_PRE: |
| new_rate = rv1108_aclk_bus_set_clk(priv->cru, rate); |
| break; |
| case ACLK_PERI: |
| new_rate = rv1108_aclk_peri_set_clk(priv->cru, rate); |
| break; |
| case HCLK_PERI: |
| new_rate = rv1108_hclk_peri_set_clk(priv->cru, rate); |
| break; |
| case PCLK_PERI: |
| new_rate = rv1108_pclk_peri_set_clk(priv->cru, rate); |
| break; |
| case SCLK_I2C0_PMU: |
| case SCLK_I2C1: |
| case SCLK_I2C2: |
| case SCLK_I2C3: |
| new_rate = rv1108_i2c_set_clk(priv->cru, clk->id, rate); |
| break; |
| case HCLK_EMMC: |
| case SCLK_EMMC: |
| new_rate = rv1108_mmc_set_clk(priv->cru, rate); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return new_rate; |
| } |
| |
| static const struct clk_ops rv1108_clk_ops = { |
| .get_rate = rv1108_clk_get_rate, |
| .set_rate = rv1108_clk_set_rate, |
| }; |
| |
| static void rkclk_init(struct rv1108_cru *cru) |
| { |
| unsigned int apll, dpll, gpll; |
| unsigned int aclk_bus, aclk_peri, hclk_peri, pclk_peri; |
| |
| aclk_bus = rv1108_aclk_bus_set_clk(cru, ACLK_BUS_HZ / 2); |
| aclk_peri = rv1108_aclk_peri_set_clk(cru, ACLK_PERI_HZ / 2); |
| hclk_peri = rv1108_hclk_peri_set_clk(cru, HCLK_PERI_HZ / 2); |
| pclk_peri = rv1108_pclk_peri_set_clk(cru, PCLK_PERI_HZ / 2); |
| rv1108_aclk_vio0_set_clk(cru, 297000000); |
| rv1108_aclk_vio1_set_clk(cru, 297000000); |
| |
| /* configure apll */ |
| rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg); |
| rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg); |
| aclk_bus = rv1108_aclk_bus_set_clk(cru, ACLK_BUS_HZ); |
| aclk_peri = rv1108_aclk_peri_set_clk(cru, ACLK_PERI_HZ); |
| hclk_peri = rv1108_hclk_peri_set_clk(cru, HCLK_PERI_HZ); |
| pclk_peri = rv1108_pclk_peri_set_clk(cru, PCLK_PERI_HZ); |
| |
| apll = rkclk_pll_get_rate(cru, CLK_ARM); |
| dpll = rkclk_pll_get_rate(cru, CLK_DDR); |
| gpll = rkclk_pll_get_rate(cru, CLK_GENERAL); |
| |
| rk_clrsetreg(&cru->clksel_con[0], CORE_CLK_DIV_MASK, |
| 0 << MAC_CLK_DIV_SHIFT); |
| |
| printf("APLL: %d DPLL:%d GPLL:%d\n", apll, dpll, gpll); |
| printf("ACLK_BUS: %d ACLK_PERI:%d HCLK_PERI:%d PCLK_PERI:%d\n", |
| aclk_bus, aclk_peri, hclk_peri, pclk_peri); |
| } |
| |
| static int rv1108_clk_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct rv1108_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->cru = dev_read_addr_ptr(dev); |
| |
| return 0; |
| } |
| |
| static int rv1108_clk_probe(struct udevice *dev) |
| { |
| struct rv1108_clk_priv *priv = dev_get_priv(dev); |
| |
| rkclk_init(priv->cru); |
| |
| return 0; |
| } |
| |
| static int rv1108_clk_bind(struct udevice *dev) |
| { |
| int ret; |
| struct udevice *sys_child; |
| struct sysreset_reg *priv; |
| |
| /* The reset driver does not have a device node, so bind it here */ |
| ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset", |
| &sys_child); |
| if (ret) { |
| debug("Warning: No sysreset driver: ret=%d\n", ret); |
| } else { |
| priv = malloc(sizeof(struct sysreset_reg)); |
| priv->glb_srst_fst_value = offsetof(struct rv1108_cru, |
| glb_srst_fst_val); |
| priv->glb_srst_snd_value = offsetof(struct rv1108_cru, |
| glb_srst_snd_val); |
| sys_child->priv = priv; |
| } |
| |
| #if CONFIG_IS_ENABLED(RESET_ROCKCHIP) |
| ret = offsetof(struct rv1108_cru, softrst_con[0]); |
| ret = rockchip_reset_bind(dev, ret, 13); |
| if (ret) |
| debug("Warning: software reset driver bind faile\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id rv1108_clk_ids[] = { |
| { .compatible = "rockchip,rv1108-cru" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(clk_rv1108) = { |
| .name = "clk_rv1108", |
| .id = UCLASS_CLK, |
| .of_match = rv1108_clk_ids, |
| .priv_auto_alloc_size = sizeof(struct rv1108_clk_priv), |
| .ops = &rv1108_clk_ops, |
| .bind = rv1108_clk_bind, |
| .ofdata_to_platdata = rv1108_clk_ofdata_to_platdata, |
| .probe = rv1108_clk_probe, |
| }; |