blob: 6ba37213cb8cd8413ab89f2d599b51ed368dd8d0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <clk.h>
#include <div64.h>
#include <dm.h>
#include <fdtdec.h>
#include <generic-phy.h>
#include <reset.h>
#include <syscon.h>
#include <usb.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <power/regulator.h>
/* USBPHYC registers */
#define STM32_USBPHYC_PLL 0x0
#define STM32_USBPHYC_MISC 0x8
/* STM32_USBPHYC_PLL bit fields */
#define PLLNDIV GENMASK(6, 0)
#define PLLNDIV_SHIFT 0
#define PLLFRACIN GENMASK(25, 10)
#define PLLFRACIN_SHIFT 10
#define PLLEN BIT(26)
#define PLLSTRB BIT(27)
#define PLLSTRBYP BIT(28)
#define PLLFRACCTL BIT(29)
#define PLLDITHEN0 BIT(30)
#define PLLDITHEN1 BIT(31)
/* STM32_USBPHYC_MISC bit fields */
#define SWITHOST BIT(0)
#define MAX_PHYS 2
/* max 100 us for PLL lock and 100 us for PHY init */
#define PLL_INIT_TIME_US 200
#define PLL_PWR_DOWN_TIME_US 5
#define PLL_FVCO 2880 /* in MHz */
#define PLL_INFF_MIN_RATE 19200000 /* in Hz */
#define PLL_INFF_MAX_RATE 38400000 /* in Hz */
struct pll_params {
u8 ndiv;
u16 frac;
};
struct stm32_usbphyc {
fdt_addr_t base;
struct clk clk;
struct udevice *vdda1v1;
struct udevice *vdda1v8;
struct stm32_usbphyc_phy {
struct udevice *vdd;
bool init;
bool powered;
} phys[MAX_PHYS];
};
static void stm32_usbphyc_get_pll_params(u32 clk_rate,
struct pll_params *pll_params)
{
unsigned long long fvco, ndiv, frac;
/*
* | FVCO = INFF*2*(NDIV + FRACT/2^16 ) when DITHER_DISABLE[1] = 1
* | FVCO = 2880MHz
* | NDIV = integer part of input bits to set the LDF
* | FRACT = fractional part of input bits to set the LDF
* => PLLNDIV = integer part of (FVCO / (INFF*2))
* => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16
* <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16
*/
fvco = (unsigned long long)PLL_FVCO * 1000000; /* In Hz */
ndiv = fvco;
do_div(ndiv, (clk_rate * 2));
pll_params->ndiv = (u8)ndiv;
frac = fvco * (1 << 16);
do_div(frac, (clk_rate * 2));
frac = frac - (ndiv * (1 << 16));
pll_params->frac = (u16)frac;
}
static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
{
struct pll_params pll_params;
u32 clk_rate = clk_get_rate(&usbphyc->clk);
u32 usbphyc_pll;
if ((clk_rate < PLL_INFF_MIN_RATE) || (clk_rate > PLL_INFF_MAX_RATE)) {
pr_debug("%s: input clk freq (%dHz) out of range\n",
__func__, clk_rate);
return -EINVAL;
}
stm32_usbphyc_get_pll_params(clk_rate, &pll_params);
usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP;
usbphyc_pll |= ((pll_params.ndiv << PLLNDIV_SHIFT) & PLLNDIV);
if (pll_params.frac) {
usbphyc_pll |= PLLFRACCTL;
usbphyc_pll |= ((pll_params.frac << PLLFRACIN_SHIFT)
& PLLFRACIN);
}
writel(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);
pr_debug("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n", __func__,
clk_rate, pll_params.ndiv, pll_params.frac);
return 0;
}
static bool stm32_usbphyc_is_init(struct stm32_usbphyc *usbphyc)
{
int i;
for (i = 0; i < MAX_PHYS; i++) {
if (usbphyc->phys[i].init)
return true;
}
return false;
}
static bool stm32_usbphyc_is_powered(struct stm32_usbphyc *usbphyc)
{
int i;
for (i = 0; i < MAX_PHYS; i++) {
if (usbphyc->phys[i].powered)
return true;
}
return false;
}
static int stm32_usbphyc_phy_init(struct phy *phy)
{
struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
bool pllen = readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN ?
true : false;
int ret;
pr_debug("%s phy ID = %lu\n", __func__, phy->id);
/* Check if one phy port has already configured the pll */
if (pllen && stm32_usbphyc_is_init(usbphyc))
goto initialized;
if (usbphyc->vdda1v1) {
ret = regulator_set_enable(usbphyc->vdda1v1, true);
if (ret)
return ret;
}
if (usbphyc->vdda1v8) {
ret = regulator_set_enable(usbphyc->vdda1v8, true);
if (ret)
return ret;
}
if (pllen) {
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
udelay(PLL_PWR_DOWN_TIME_US);
}
ret = stm32_usbphyc_pll_init(usbphyc);
if (ret)
return ret;
setbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
/* We must wait PLL_INIT_TIME_US before using PHY */
udelay(PLL_INIT_TIME_US);
if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN))
return -EIO;
initialized:
usbphyc_phy->init = true;
return 0;
}
static int stm32_usbphyc_phy_exit(struct phy *phy)
{
struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
int ret;
pr_debug("%s phy ID = %lu\n", __func__, phy->id);
usbphyc_phy->init = false;
/* Check if other phy port requires pllen */
if (stm32_usbphyc_is_init(usbphyc))
return 0;
clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
/*
* We must wait PLL_PWR_DOWN_TIME_US before checking that PLLEN
* bit is still clear
*/
udelay(PLL_PWR_DOWN_TIME_US);
if (readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)
return -EIO;
if (usbphyc->vdda1v1) {
ret = regulator_set_enable(usbphyc->vdda1v1, false);
if (ret)
return ret;
}
if (usbphyc->vdda1v8) {
ret = regulator_set_enable(usbphyc->vdda1v8, false);
if (ret)
return ret;
}
return 0;
}
static int stm32_usbphyc_phy_power_on(struct phy *phy)
{
struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
int ret;
pr_debug("%s phy ID = %lu\n", __func__, phy->id);
if (usbphyc_phy->vdd) {
ret = regulator_set_enable(usbphyc_phy->vdd, true);
if (ret)
return ret;
}
usbphyc_phy->powered = true;
return 0;
}
static int stm32_usbphyc_phy_power_off(struct phy *phy)
{
struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
int ret;
pr_debug("%s phy ID = %lu\n", __func__, phy->id);
usbphyc_phy->powered = false;
if (stm32_usbphyc_is_powered(usbphyc))
return 0;
if (usbphyc_phy->vdd) {
ret = regulator_set_enable(usbphyc_phy->vdd, false);
if (ret)
return ret;
}
return 0;
}
static int stm32_usbphyc_get_regulator(struct udevice *dev, ofnode node,
char *supply_name,
struct udevice **regulator)
{
struct ofnode_phandle_args regulator_phandle;
int ret;
ret = ofnode_parse_phandle_with_args(node, supply_name,
NULL, 0, 0,
&regulator_phandle);
if (ret) {
dev_err(dev, "Can't find %s property (%d)\n", supply_name, ret);
return ret;
}
ret = uclass_get_device_by_ofnode(UCLASS_REGULATOR,
regulator_phandle.node,
regulator);
if (ret) {
dev_err(dev, "Can't get %s regulator (%d)\n", supply_name, ret);
return ret;
}
return 0;
}
static int stm32_usbphyc_of_xlate(struct phy *phy,
struct ofnode_phandle_args *args)
{
if (args->args_count < 1)
return -ENODEV;
if (args->args[0] >= MAX_PHYS)
return -ENODEV;
phy->id = args->args[0];
if ((phy->id == 0 && args->args_count != 1) ||
(phy->id == 1 && args->args_count != 2)) {
dev_err(dev, "invalid number of cells for phy port%ld\n",
phy->id);
return -EINVAL;
}
return 0;
}
static const struct phy_ops stm32_usbphyc_phy_ops = {
.init = stm32_usbphyc_phy_init,
.exit = stm32_usbphyc_phy_exit,
.power_on = stm32_usbphyc_phy_power_on,
.power_off = stm32_usbphyc_phy_power_off,
.of_xlate = stm32_usbphyc_of_xlate,
};
static int stm32_usbphyc_probe(struct udevice *dev)
{
struct stm32_usbphyc *usbphyc = dev_get_priv(dev);
struct reset_ctl reset;
ofnode node;
int i, ret;
usbphyc->base = dev_read_addr(dev);
if (usbphyc->base == FDT_ADDR_T_NONE)
return -EINVAL;
/* Enable clock */
ret = clk_get_by_index(dev, 0, &usbphyc->clk);
if (ret)
return ret;
ret = clk_enable(&usbphyc->clk);
if (ret)
return ret;
/* Reset */
ret = reset_get_by_index(dev, 0, &reset);
if (!ret) {
reset_assert(&reset);
udelay(2);
reset_deassert(&reset);
}
/* get usbphyc regulator */
ret = device_get_supply_regulator(dev, "vdda1v1-supply",
&usbphyc->vdda1v1);
if (ret) {
dev_err(dev, "Can't get vdda1v1-supply regulator\n");
return ret;
}
ret = device_get_supply_regulator(dev, "vdda1v8-supply",
&usbphyc->vdda1v8);
if (ret) {
dev_err(dev, "Can't get vdda1v8-supply regulator\n");
return ret;
}
/*
* parse all PHY subnodes in order to populate regulator associated
* to each PHY port
*/
node = dev_read_first_subnode(dev);
for (i = 0; i < MAX_PHYS; i++) {
struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + i;
usbphyc_phy->init = false;
usbphyc_phy->powered = false;
ret = stm32_usbphyc_get_regulator(dev, node, "phy-supply",
&usbphyc_phy->vdd);
if (ret)
return ret;
node = dev_read_next_subnode(node);
}
/* Check if second port has to be used for host controller */
if (dev_read_bool(dev, "st,port2-switch-to-host"))
setbits_le32(usbphyc->base + STM32_USBPHYC_MISC, SWITHOST);
return 0;
}
static const struct udevice_id stm32_usbphyc_of_match[] = {
{ .compatible = "st,stm32mp1-usbphyc", },
{ },
};
U_BOOT_DRIVER(stm32_usb_phyc) = {
.name = "stm32-usbphyc",
.id = UCLASS_PHY,
.of_match = stm32_usbphyc_of_match,
.ops = &stm32_usbphyc_phy_ops,
.probe = stm32_usbphyc_probe,
.priv_auto_alloc_size = sizeof(struct stm32_usbphyc),
};