blob: 008a70a7c2e913e9f181ca67a5fd0207f4fb571c [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* DHCOM DH-iMX6 PDK board configuration
*
* Copyright (C) 2017 Marek Vasut <marex@denx.de>
*/
#ifndef __DH_IMX6_CONFIG_H
#define __DH_IMX6_CONFIG_H
#include <asm/arch/imx-regs.h>
#include "mx6_common.h"
/*
* SPI NOR layout:
* 0x00_0000-0x00_ffff ... U-Boot SPL
* 0x01_0000-0x0f_ffff ... U-Boot
* 0x10_0000-0x10_ffff ... U-Boot env #1
* 0x11_0000-0x11_ffff ... U-Boot env #2
* 0x12_0000-0x1f_ffff ... UNUSED
*/
/* SPL */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#define CONFIG_SPL_TARGET "u-boot-with-spl.imx"
/* Miscellaneous configurable options */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/* Bootcounter */
#define CONFIG_SYS_BOOTCOUNT_BE
/* FEC ethernet */
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_ARP_TIMEOUT 200UL
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 3
/* SATA Configs */
#define CONFIG_LBA48
/* SPI Flash Configs */
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_DM_SPI
#undef CONFIG_DM_SPI_FLASH
#endif
/* UART */
#define CONFIG_MXC_UART_BASE UART1_BASE
/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
/* USB Gadget (DFU, UMS) */
#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (16 * 1024 * 1024)
#define DFU_DEFAULT_POLL_TIMEOUT 300
/* USB IDs */
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
#endif
#endif
/* Watchdog */
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_WDT
#undef CONFIG_WATCHDOG
#define CONFIG_HW_WATCHDOG
#endif
#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_addr=0x18000000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x10008000\0" \
"fdt_addr_r=0x13000000\0" \
"ramdisk_addr_r=0x18000000\0" \
"scriptaddr=0x14000000\0" \
"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
BOOTENV
#define CONFIG_BOOTCOMMAND "run distro_bootcmd"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 2) \
func(USB, usb, 1) \
func(SATA, sata, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#endif
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment */
#endif /* __DH_IMX6_CONFIG_H */