| /* |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. |
| * |
| * Michael Barkowski <michael.barkowski@freescale.com> |
| * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <ioports.h> |
| #include <mpc83xx.h> |
| #include <i2c.h> |
| #include <miiphy.h> |
| #include <command.h> |
| #include <linux/libfdt.h> |
| #include <u-boot/crc.h> |
| #if defined(CONFIG_PCI) |
| #include <pci.h> |
| #endif |
| #include <asm/mmu.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| const qe_iop_conf_t qe_iop_conf_tab[] = { |
| /* UCC3 */ |
| {1, 0, 1, 0, 1}, /* TxD0 */ |
| {1, 1, 1, 0, 1}, /* TxD1 */ |
| {1, 2, 1, 0, 1}, /* TxD2 */ |
| {1, 3, 1, 0, 1}, /* TxD3 */ |
| {1, 9, 1, 0, 1}, /* TxER */ |
| {1, 12, 1, 0, 1}, /* TxEN */ |
| {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ |
| |
| {1, 4, 2, 0, 1}, /* RxD0 */ |
| {1, 5, 2, 0, 1}, /* RxD1 */ |
| {1, 6, 2, 0, 1}, /* RxD2 */ |
| {1, 7, 2, 0, 1}, /* RxD3 */ |
| {1, 8, 2, 0, 1}, /* RxER */ |
| {1, 10, 2, 0, 1}, /* RxDV */ |
| {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ |
| {1, 11, 2, 0, 1}, /* COL */ |
| {1, 13, 2, 0, 1}, /* CRS */ |
| |
| /* UCC2 */ |
| {0, 18, 1, 0, 1}, /* TxD0 */ |
| {0, 19, 1, 0, 1}, /* TxD1 */ |
| {0, 20, 1, 0, 1}, /* TxD2 */ |
| {0, 21, 1, 0, 1}, /* TxD3 */ |
| {0, 27, 1, 0, 1}, /* TxER */ |
| {0, 30, 1, 0, 1}, /* TxEN */ |
| {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */ |
| |
| {0, 22, 2, 0, 1}, /* RxD0 */ |
| {0, 23, 2, 0, 1}, /* RxD1 */ |
| {0, 24, 2, 0, 1}, /* RxD2 */ |
| {0, 25, 2, 0, 1}, /* RxD3 */ |
| {0, 26, 1, 0, 1}, /* RxER */ |
| {0, 28, 2, 0, 1}, /* Rx_DV */ |
| {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */ |
| {0, 29, 2, 0, 1}, /* COL */ |
| {0, 31, 2, 0, 1}, /* CRS */ |
| |
| {3, 4, 3, 0, 2}, /* MDIO */ |
| {3, 5, 1, 0, 2}, /* MDC */ |
| |
| {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ |
| }; |
| |
| int fixed_sdram(void); |
| |
| int dram_init(void) |
| { |
| volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; |
| u32 msize = 0; |
| |
| if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) |
| return -ENXIO; |
| |
| /* DDR SDRAM - Main SODIMM */ |
| im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; |
| |
| msize = fixed_sdram(); |
| |
| /* set total bus SDRAM size(bytes) -- DDR */ |
| gd->ram_size = msize * 1024 * 1024; |
| |
| return 0; |
| } |
| |
| /************************************************************************* |
| * fixed sdram init -- doesn't use serial presence detect. |
| ************************************************************************/ |
| int fixed_sdram(void) |
| { |
| volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; |
| u32 msize = 0; |
| u32 ddr_size; |
| u32 ddr_size_log2; |
| |
| msize = CONFIG_SYS_DDR_SIZE; |
| for (ddr_size = msize << 20, ddr_size_log2 = 0; |
| (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { |
| if (ddr_size & 1) { |
| return -1; |
| } |
| } |
| im->sysconf.ddrlaw[0].ar = |
| LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); |
| im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; |
| im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; |
| im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; |
| im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; |
| im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; |
| im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; |
| im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; |
| im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; |
| im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; |
| im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; |
| im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; |
| im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; |
| __asm__ __volatile__ ("sync"); |
| udelay(200); |
| |
| im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; |
| __asm__ __volatile__ ("sync"); |
| return msize; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Freescale MPC8323ERDB\n"); |
| return 0; |
| } |
| |
| static struct pci_region pci_regions[] = { |
| { |
| bus_start: CONFIG_SYS_PCI1_MEM_BASE, |
| phys_start: CONFIG_SYS_PCI1_MEM_PHYS, |
| size: CONFIG_SYS_PCI1_MEM_SIZE, |
| flags: PCI_REGION_MEM | PCI_REGION_PREFETCH |
| }, |
| { |
| bus_start: CONFIG_SYS_PCI1_MMIO_BASE, |
| phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, |
| size: CONFIG_SYS_PCI1_MMIO_SIZE, |
| flags: PCI_REGION_MEM |
| }, |
| { |
| bus_start: CONFIG_SYS_PCI1_IO_BASE, |
| phys_start: CONFIG_SYS_PCI1_IO_PHYS, |
| size: CONFIG_SYS_PCI1_IO_SIZE, |
| flags: PCI_REGION_IO |
| } |
| }; |
| |
| void pci_init_board(void) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; |
| volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; |
| volatile law83xx_t *pci_law = immr->sysconf.pcilaw; |
| struct pci_region *reg[] = { pci_regions }; |
| |
| /* Enable all 3 PCI_CLK_OUTPUTs. */ |
| clk->occr |= 0xe0000000; |
| |
| /* Configure PCI Local Access Windows */ |
| pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; |
| pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; |
| |
| pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; |
| pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; |
| |
| mpc83xx_pci_init(1, reg); |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_SYS_I2C_MAC_OFFSET) |
| int mac_read_from_eeprom(void) |
| { |
| uchar buf[28]; |
| char str[18]; |
| int i = 0; |
| unsigned int crc = 0; |
| unsigned char enetvar[32]; |
| |
| /* Read MAC addresses from EEPROM */ |
| if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) { |
| printf("\nEEPROM @ 0x%02x read FAILED!!!\n", |
| CONFIG_SYS_I2C_EEPROM_ADDR); |
| } else { |
| uint32_t crc_buf; |
| |
| memcpy(&crc_buf, &buf[24], sizeof(uint32_t)); |
| |
| if (crc32(crc, buf, 24) == crc_buf) { |
| printf("Reading MAC from EEPROM\n"); |
| for (i = 0; i < 4; i++) { |
| if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) { |
| sprintf(str, |
| "%02X:%02X:%02X:%02X:%02X:%02X", |
| buf[i * 6], buf[i * 6 + 1], |
| buf[i * 6 + 2], buf[i * 6 + 3], |
| buf[i * 6 + 4], buf[i * 6 + 5]); |
| sprintf((char *)enetvar, |
| i ? "eth%daddr" : "ethaddr", i); |
| env_set((char *)enetvar, str); |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| #endif /* CONFIG_I2C_MAC_OFFSET */ |