* Add FEC support for TQM8540 board.
Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
* Patch by Martin Krause, 04 Apr 2005:
Update default configuration for CMC_PU2 board.
diff --git a/CHANGELOG b/CHANGELOG
index 0d7519f..49be2c3 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Add FEC support for TQM8540 board.
+ Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+ Update default configuration for CMC_PU2 board.
+
* Patch by Steven Scholz, 04 Apr 2005:
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
diff --git a/cpu/mpc85xx/tsec.c b/cpu/mpc85xx/tsec.c
index 992475c..eee5f25 100644
--- a/cpu/mpc85xx/tsec.c
+++ b/cpu/mpc85xx/tsec.c
@@ -277,7 +277,21 @@
struct phy_info *curphy;
/* Assign a Physical address to the TBI */
- priv->regs->tbipa=TBIPA_VALUE;
+
+ {
+ volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+ regs->tbipa = TBIPA_VALUE;
+ regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
+ regs->tbipa = TBIPA_VALUE;
+ asm("msync");
+ }
+
+ /* Reset MII (due to new addresses) */
+ priv->phyregs->miimcfg = MIIMCFG_RESET;
+ asm("msync");
+ priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+ asm("msync");
+ while(priv->phyregs->miimind & MIIMIND_BUSY);
if(0 == relocated)
relocate_cmds();
@@ -793,19 +807,50 @@
},
};
+uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
+{
+ unsigned int speed;
+ if (priv->link) {
+ speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
+
+ switch (speed) {
+ case MIIM_LXT971_SR2_10HDX:
+ priv->speed = 10;
+ priv->duplexity = 0;
+ break;
+ case MIIM_LXT971_SR2_10FDX:
+ priv->speed = 10;
+ priv->duplexity = 1;
+ break;
+ case MIIM_LXT971_SR2_100HDX:
+ priv->speed = 100;
+ priv->duplexity = 0;
+ default:
+ priv->speed = 100;
+ priv->duplexity = 1;
+ break;
+ }
+ } else {
+ priv->speed = 0;
+ priv->duplexity = 0;
+ }
+
+ return 0;
+}
+
static struct phy_info phy_info_lxt971 = {
0x0001378e,
"LXT971",
4,
(struct phy_cmd []) { /* config */
- { MIIM_CONTROL, MIIM_CONTROL_INIT, mii_cr_init }, /* autonegotiate */
+ { MIIM_CR, MIIM_CR_INIT, mii_cr_init }, /* autonegotiate */
{ miim_end, }
},
(struct phy_cmd []) { /* startup - enable interrupts */
/* { 0x12, 0x00f2, NULL }, */
- { 0x14, 0xd422, NULL }, /* LED config */
{ MIIM_STATUS, miim_read, NULL },
- { MIIM_STATUS, miim_read, mii_parse_sr },
+ { MIIM_STATUS, miim_read, &mii_parse_sr },
+ { MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2 },
{ miim_end, }
},
(struct phy_cmd []) { /* shutdown - disable interrupts */
diff --git a/cpu/mpc85xx/tsec.h b/cpu/mpc85xx/tsec.h
index 275bbd2..e24351a 100644
--- a/cpu/mpc85xx/tsec.h
+++ b/cpu/mpc85xx/tsec.h
@@ -142,6 +142,14 @@
#define MIIM_DM9161_10BTCSR 0x12
#define MIIM_DM9161_10BTCSR_INIT 0x7800
+/* LXT971 Status 2 registers */
+#define MIIM_LXT971_SR2 17 /* Status Register 2 */
+#define MIIM_LXT971_SR2_SPEED_MASK 0xf000
+#define MIIM_LXT971_SR2_10HDX 0x1000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x2000 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x8000 /* 100 Mbit full duplex selected */
+
#define MIIM_READ_COMMAND 0x00000001
#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
diff --git a/include/configs/TQM8540.h b/include/configs/TQM8540.h
index fb965f5..7dd067e 100644
--- a/include/configs/TQM8540.h
+++ b/include/configs/TQM8540.h
@@ -291,7 +291,7 @@
#define TSEC1_PHYIDX 0
#define TSEC2_PHYIDX 0
-#undef CONFIG_MPC85XX_FEC
+#define CONFIG_MPC85XX_FEC 1
#define FEC_PHY_ADDR 0
#define FEC_PHYIDX 0
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 5e96e09..9ed9adb 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -140,14 +140,13 @@
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-#define CFG_MEMTEST_START PHYS_SDRAM
-#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CFG_MEMTEST_START PHYS_SDRAM
+#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91C_USE_RMII
-#define CONFIG_HAS_DATAFLASH 1
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS 2
#define CFG_MAX_DATAFLASH_PAGES 16384
@@ -206,4 +205,48 @@
#error CONFIG_USE_IRQ not supported
#endif
+#define CFG_DEVICE_NULLDEV 1 /* enble null device */
+#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
+
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */
+
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
+ "addmtd;bootm\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
+ "addcons addmtd; bootm\0" \
+ "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
+ "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
+ "addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
+ "$(hostname)::off\0" \
+ "addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
+ "addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
+ "64k(environment),768k(linux),4096k(root),-\0" \
+ "load=tftp $(loadaddr) $(loadfile)\0" \
+ "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
+ "cp.b $(loadaddr) 10000000 $(filesize);" \
+ "protect on 10000000 1001ffff\0" \
+ "updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
+ "cp.b $(loadaddr) 10030000 $(filesize)\0" \
+ "updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
+ "cp.b $(loadaddr) 100f0000 $(filesize)\0" \
+ "updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
+ "cp.b $(loadaddr) 104f0000 $(filesize)\0" \
+ "cramfsimage=cramfs_cmc-pu2.img\0" \
+ "jffsimage=jffs2_cmc-pu2.img\0" \
+ "loadfile=u-boot_cmc-pu2.bin\0" \
+ "bootfile=uImage_cmc-pu2\0" \
+ "loadaddr=0x20800000\0" \
+ "hostname=CMC-TC-PU2\0" \
+ "bootcmd=run dhcp_start;run flash_cramfs\0" \
+ "autoload=n\0" \
+ "dhcp_start=echo no DHCP\0" \
+ "ipaddr=192.168.0.190\0"
#endif /* __CONFIG_H */