include/configs/cmc_pu2.h - platform/external/u-boot - Gitiles

 /*
  * 2004-2005 Gary Jennejohn <garyj@denx.de>
  *
  * Configuration settings for the CMC PU2 board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* ARM asynchronous clock */
 #define AT91C_MAIN_CLOCK	207360000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
 #define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */

 #define AT91_SLOW_CLOCK		32768	/* slow clock */

 #define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	 */
 #define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board	 */
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	1

 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CFG_USE_MAIN_OSCILLATOR		1
 /* flash */
 #define MC_PUIA_VAL	0x00000000
 #define MC_PUP_VAL	0x00000000
 #define MC_PUER_VAL	0x00000000
 #define MC_ASR_VAL	0x00000000
 #define MC_AASR_VAL	0x00000000
 #define EBI_CFGR_VAL	0x00000000
 #define SMC2_CSR_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */

 /* clocks */
 #define PLLAR_VAL	0x202CBE04 /* 207.360 MHz for PCK */
 #define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
 #define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */

 /* sdram */
 #define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
 #define PIOC_BSR_VAL	0x00000000
 #define PIOC_PDR_VAL	0xFFFF0000
 #define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
 #define SDRC_CR_VAL	0x3399c1d4 /* set up the SDRAM */
 #define SDRAM		0x20000000 /* address of the SDRAM */
 #define SDRAM1		0x20000080 /* address of the SDRAM */
 #define SDRAM_VAL	0x00000000 /* value written to SDRAM */
 #define SDRC_MR_VAL	0x00000002 /* Precharge All */
 #define SDRC_MR_VAL1	0x00000004 /* refresh */
 #define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
 #define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
 #define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

 /*
  * Size of malloc() pool
  */
 #define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

 #define CONFIG_BAUDRATE		9600

 #define CFG_AT91C_BRGR_DIVISOR	450	/* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */

 /*
  * Hardware drivers
  */

 /* define one of these to choose the DBGU, USART0  or USART1 as console */
 #undef CONFIG_DBGU
 #define CONFIG_USART0
 #undef CONFIG_USART1

 #undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/

 #undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */

 #define CONFIG_HARD_I2C

 #ifdef CONFIG_HARD_I2C
 #define CFG_I2C_SPEED		0	/* not used */
 #define CFG_I2C_SLAVE		0	/* not used */
 #define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
 #define CFG_I2C_RTC_ADDR	0x32
 #define CFG_I2C_EEPROM_ADDR	0x50
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW
 #endif
 /* still about 20 kB free with this defined */
 #define CFG_LONGHELP

 #define CONFIG_BOOTDELAY      3

 #ifdef CONFIG_HARD_I2C
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
 			CFG_CMD_DATE	| \
 			CFG_CMD_DHCP 	| \
 			CFG_CMD_EEPROM	| \
 			CFG_CMD_I2C	| \
 			CFG_CMD_NFS	| \
 			CFG_CMD_SNTP  ) & \
 		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
 #else
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
 			CFG_CMD_DHCP 	| \
 			CFG_CMD_NFS	| \
 			CFG_CMD_SNTP  ) & \
 		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
 #define CONFIG_TIMESTAMP
 #endif
 #define CFG_LONGHELP

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
 #define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */

 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
 #define PHYS_SDRAM_SIZE		0x1000000 	/* 16 megs */

 #define CFG_MEMTEST_START	PHYS_SDRAM
 #define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144

 #define CONFIG_DRIVER_ETHER
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII

 #define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
 #define CFG_MAX_DATAFLASH_BANKS		2
 #define CFG_MAX_DATAFLASH_PAGES		16384
 #define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
 #define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */

 #define PHYS_FLASH_1			0x10000000
 #define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
 #define CFG_FLASH_BASE			PHYS_FLASH_1
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 #define CFG_MAX_FLASH_BANKS		1
 #define CFG_MAX_FLASH_SECT		256
 #define CFG_FLASH_ERASE_TOUT		(11 * CFG_HZ)	/* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT		( 2 * CFG_HZ)	/* Timeout for Flash Write */

 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_OFFSET			0x20000		/* after u-boot.bin */
 #define CFG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
 #define CFG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */

 #define CFG_LOAD_ADDR		0x21000000  /* default load address */

 #define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }

 #define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
 #define CFG_CBSIZE		256		/* Console I/O Buffer Size */
 #define CFG_MAXARGS		32		/* max number of command args */
 #define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */

 #ifndef __ASSEMBLY__
 /*-----------------------------------------------------------------------
  * Board specific extension for bd_info
  *
  * This structure is embedded in the global bd_info (bd_t) structure
  * and can be used by the board specific code (eg board/...)
  */

 struct bd_info_ext {
 	/* helper variable for board environment handling
 	 *
 	 * env_crc_valid == 0	 =>   uninitialised
 	 * env_crc_valid  > 0	 =>   environment crc in flash is valid
 	 * env_crc_valid  < 0	 =>   environment crc in flash is invalid
 	 */
 	int env_crc_valid;
 };
 #endif	/* __ASSEMBLY__ */

 #define CFG_HZ 1000
 #define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
 						/* AT91C_TC_TIMER_DIV1_CLOCK */

 #define CONFIG_STACKSIZE	(32*1024)	/* regular stack */

 #ifdef CONFIG_USE_IRQ
 #error CONFIG_USE_IRQ not supported
 #endif

 #define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
 #define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/

 #define CONFIG_AUTOBOOT_KEYED
 #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
 #define CONFIG_AUTOBOOT_STOP_STR "R"	/* default password */

 #define CONFIG_VERSION_VARIABLE	1       /* include version env variable */

 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
 		"addmtd;bootm\0" \
 	"nfsargs=setenv bootargs root=/dev/nfs rw " \
 		"nfsroot=$(serverip):$(rootpath)\0" \
 	"net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
 		"addcons addmtd; bootm\0" \
 	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
 	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
 	"addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
 		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
 		"$(hostname)::off\0" \
 	"addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
 	"addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
 		"64k(environment),768k(linux),4096k(root),-\0" \
 	"load=tftp $(loadaddr) $(loadfile)\0" \
 	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
 		"cp.b $(loadaddr) 10000000 $(filesize);" \
 		"protect on 10000000 1001ffff\0" \
 	"updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
 		"cp.b $(loadaddr) 10030000 $(filesize)\0" \
 	"updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
 		"cp.b $(loadaddr) 100f0000 $(filesize)\0" \
 	"updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
 		"cp.b $(loadaddr) 104f0000 $(filesize)\0" \
 	"cramfsimage=cramfs_cmc-pu2.img\0" \
 	"jffsimage=jffs2_cmc-pu2.img\0" \
 	"loadfile=u-boot_cmc-pu2.bin\0" \
 	"bootfile=uImage_cmc-pu2\0" \
 	"loadaddr=0x20800000\0" \
 	"hostname=CMC-TC-PU2\0" \
 	"bootcmd=run dhcp_start;run flash_cramfs\0" \
 	"autoload=n\0" \
 	"dhcp_start=echo no DHCP\0" \
 	"ipaddr=192.168.0.190\0"
 #endif	/* __CONFIG_H */
	/*
	* 2004-2005 Gary Jennejohn <garyj@denx.de>
	*
	* Configuration settings for the CMC PU2 board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* ARM asynchronous clock */
	#define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
	#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */

	#define AT91_SLOW_CLOCK 32768 /* slow clock */

	#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
	#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS 1
	#define CONFIG_INITRD_TAG 1

	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
	#define CFG_USE_MAIN_OSCILLATOR 1
	/* flash */
	#define MC_PUIA_VAL 0x00000000
	#define MC_PUP_VAL 0x00000000
	#define MC_PUER_VAL 0x00000000
	#define MC_ASR_VAL 0x00000000
	#define MC_AASR_VAL 0x00000000
	#define EBI_CFGR_VAL 0x00000000
	#define SMC2_CSR_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */

	/* clocks */
	#define PLLAR_VAL 0x202CBE04 /* 207.360 MHz for PCK */
	#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
	#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */

	/* sdram */
	#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
	#define PIOC_BSR_VAL 0x00000000
	#define PIOC_PDR_VAL 0xFFFF0000
	#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
	#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */
	#define SDRAM 0x20000000 /* address of the SDRAM */
	#define SDRAM1 0x20000080 /* address of the SDRAM */
	#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
	#define SDRC_MR_VAL 0x00000002 /* Precharge All */
	#define SDRC_MR_VAL1 0x00000004 /* refresh */
	#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
	#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
	#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
	#endif /* CONFIG_SKIP_LOWLEVEL_INIT */

	/*
	* Size of malloc() pool
	*/
	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */

	#define CONFIG_BAUDRATE 9600

	#define CFG_AT91C_BRGR_DIVISOR 450 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */

	/*
	* Hardware drivers
	*/

	/* define one of these to choose the DBGU, USART0 or USART1 as console */
	#undef CONFIG_DBGU
	#define CONFIG_USART0
	#undef CONFIG_USART1

	#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */

	#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */

	#define CONFIG_HARD_I2C

	#ifdef CONFIG_HARD_I2C
	#define CFG_I2C_SPEED 0 /* not used */
	#define CFG_I2C_SLAVE 0 /* not used */
	#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
	#define CFG_I2C_RTC_ADDR 0x32
	#define CFG_I2C_EEPROM_ADDR 0x50
	#define CFG_I2C_EEPROM_ADDR_LEN 1
	#define CFG_I2C_EEPROM_ADDR_OVERFLOW
	#endif
	/* still about 20 kB free with this defined */
	#define CFG_LONGHELP

	#define CONFIG_BOOTDELAY 3

	#ifdef CONFIG_HARD_I2C
	#define CONFIG_COMMANDS \
	((CONFIG_CMD_DFL \| \
	CFG_CMD_DATE \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_I2C \| \
	CFG_CMD_NFS \| \
	CFG_CMD_SNTP ) & \
	~(CFG_CMD_FPGA \| CFG_CMD_MISC) )
	#else
	#define CONFIG_COMMANDS \
	((CONFIG_CMD_DFL \| \
	CFG_CMD_DHCP \| \
	CFG_CMD_NFS \| \
	CFG_CMD_SNTP ) & \
	~(CFG_CMD_FPGA \| CFG_CMD_MISC) )
	#define CONFIG_TIMESTAMP
	#endif
	#define CFG_LONGHELP

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
	#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */

	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM 0x20000000
	#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */

	#define CFG_MEMTEST_START PHYS_SDRAM
	#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144

	#define CONFIG_DRIVER_ETHER
	#define CONFIG_NET_RETRY_COUNT 20
	#define CONFIG_AT91C_USE_RMII

	#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
	#define CFG_MAX_DATAFLASH_BANKS 2
	#define CFG_MAX_DATAFLASH_PAGES 16384
	#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
	#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */

	#define PHYS_FLASH_1 0x10000000
	#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
	#define CFG_FLASH_BASE PHYS_FLASH_1
	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	#define CFG_MAX_FLASH_BANKS 1
	#define CFG_MAX_FLASH_SECT 256
	#define CFG_FLASH_ERASE_TOUT (11 * CFG_HZ) /* Timeout for Flash Erase */
	#define CFG_FLASH_WRITE_TOUT ( 2 * CFG_HZ) /* Timeout for Flash Write */

	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
	#define CFG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
	#define CFG_ENV_SIZE (16 << 10) /* Use only 16 kB */

	#define CFG_LOAD_ADDR 0x21000000 /* default load address */

	#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }

	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#define CFG_MAXARGS 32 /* max number of command args */
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */

	#ifndef __ASSEMBLY__
	/*-----------------------------------------------------------------------
	* Board specific extension for bd_info
	*
	* This structure is embedded in the global bd_info (bd_t) structure
	* and can be used by the board specific code (eg board/...)
	*/

	struct bd_info_ext {
	/* helper variable for board environment handling
	*
	* env_crc_valid == 0 => uninitialised
	* env_crc_valid > 0 => environment crc in flash is valid
	* env_crc_valid < 0 => environment crc in flash is invalid
	*/
	int env_crc_valid;
	};
	#endif /* __ASSEMBLY__ */

	#define CFG_HZ 1000
	#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
	/* AT91C_TC_TIMER_DIV1_CLOCK */

	#define CONFIG_STACKSIZE (321024) / regular stack */

	#ifdef CONFIG_USE_IRQ
	#error CONFIG_USE_IRQ not supported
	#endif

	#define CFG_DEVICE_NULLDEV 1 /* enble null device */
	#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */

	#define CONFIG_AUTOBOOT_KEYED
	#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
	#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */

	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
	"addmtd;bootm\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=$(serverip):$(rootpath)\0" \
	"net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
	"addcons addmtd; bootm\0" \
	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
	"addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
	"$(hostname)::off\0" \
	"addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
	"addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
	"64k(environment),768k(linux),4096k(root),-\0" \
	"load=tftp $(loadaddr) $(loadfile)\0" \
	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
	"cp.b $(loadaddr) 10000000 $(filesize);" \
	"protect on 10000000 1001ffff\0" \
	"updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
	"cp.b $(loadaddr) 10030000 $(filesize)\0" \
	"updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
	"cp.b $(loadaddr) 100f0000 $(filesize)\0" \
	"updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
	"cp.b $(loadaddr) 104f0000 $(filesize)\0" \
	"cramfsimage=cramfs_cmc-pu2.img\0" \
	"jffsimage=jffs2_cmc-pu2.img\0" \
	"loadfile=u-boot_cmc-pu2.bin\0" \
	"bootfile=uImage_cmc-pu2\0" \
	"loadaddr=0x20800000\0" \
	"hostname=CMC-TC-PU2\0" \
	"bootcmd=run dhcp_start;run flash_cramfs\0" \
	"autoload=n\0" \
	"dhcp_start=echo no DHCP\0" \
	"ipaddr=192.168.0.190\0"
	#endif /* __CONFIG_H */