| /* |
| * (C) Copyright 2001 |
| * Hans-Joerg Frieden, Hyperion Entertainment |
| * Hans-JoergF@hyperion-entertainment.com |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <ide.h> |
| #include "part_amiga.h" |
| |
| #ifdef HAVE_BLOCK_DEVICE |
| |
| #undef AMIGA_DEBUG |
| |
| #ifdef AMIGA_DEBUG |
| #define PRINTF(fmt, args...) printf(fmt ,##args) |
| #else |
| #define PRINTF(fmt, args...) |
| #endif |
| |
| struct block_header |
| { |
| u32 id; |
| u32 summed_longs; |
| s32 chk_sum; |
| }; |
| |
| static unsigned char block_buffer[DEFAULT_SECTOR_SIZE]; |
| static struct rigid_disk_block rdb = {0}; |
| static struct bootcode_block bootcode = {0}; |
| |
| /* |
| * Copy a bcpl to a c string |
| */ |
| static void bcpl_strcpy(char *to, char *from) |
| { |
| int len = *from++; |
| |
| while (len) |
| { |
| *to++ = *from++; |
| len--; |
| } |
| *to = 0; |
| } |
| |
| /* |
| * Print a BCPL String. BCPL strings start with a byte with the length |
| * of the string, and don't contain a terminating nul character |
| */ |
| static void bstr_print(char *string) |
| { |
| int len = *string++; |
| char buffer[256]; |
| int i; |
| |
| i = 0; |
| while (len) |
| { |
| buffer[i++] = *string++; |
| len--; |
| } |
| |
| buffer[i] = 0; |
| printf("%-10s", buffer); |
| } |
| |
| /* |
| * Sum a block. The checksum of a block must end up at zero |
| * to be valid. The chk_sum field is selected so that adding |
| * it yields zero. |
| */ |
| int sum_block(struct block_header *header) |
| { |
| s32 *block = (s32 *)header; |
| u32 i; |
| s32 sum = 0; |
| |
| for (i = 0; i < header->summed_longs; i++) |
| sum += *block++; |
| |
| return (sum != 0); |
| } |
| |
| /* |
| * Print an AmigaOS disk type. Disk types are a four-byte identifier |
| * describing the file system. They are usually written as a three-letter |
| * word followed by a backslash and a version number. For example, |
| * DOS\0 would be the original file system. SFS\0 would be SmartFileSystem. |
| * DOS\1 is FFS. |
| */ |
| static void print_disk_type(u32 disk_type) |
| { |
| char buffer[6]; |
| buffer[0] = (disk_type & 0xFF000000)>>24; |
| buffer[1] = (disk_type & 0x00FF0000)>>16; |
| buffer[2] = (disk_type & 0x0000FF00)>>8; |
| buffer[3] = '\\'; |
| buffer[4] = (disk_type & 0x000000FF) + '0'; |
| buffer[5] = 0; |
| printf("%s", buffer); |
| } |
| |
| /* |
| * Print the info contained within the given partition block |
| */ |
| static void print_part_info(struct partition_block *p) |
| { |
| struct amiga_part_geometry *g; |
| |
| g = (struct amiga_part_geometry *)&(p->environment); |
| |
| bstr_print(p->drive_name); |
| printf("%6d\t%6d\t", |
| g->low_cyl * g->block_per_track * g->surfaces , |
| (g->high_cyl - g->low_cyl + 1) * g->block_per_track * g->surfaces - 1); |
| print_disk_type(g->dos_type); |
| printf("\t%5d\n", g->boot_priority); |
| } |
| |
| /* |
| * Search for the Rigid Disk Block. The rigid disk block is required |
| * to be within the first 16 blocks of a drive, needs to have |
| * the ID AMIGA_ID_RDISK ('RDSK') and needs to have a valid |
| * sum-to-zero checksum |
| */ |
| struct rigid_disk_block *get_rdisk(struct blk_desc *dev_desc) |
| { |
| int i; |
| int limit; |
| char *s; |
| |
| s = getenv("amiga_scanlimit"); |
| if (s) |
| limit = simple_strtoul(s, NULL, 10); |
| else |
| limit = AMIGA_BLOCK_LIMIT; |
| |
| for (i=0; i<limit; i++) |
| { |
| ulong res = dev_desc->block_read(dev_desc, i, 1, (ulong *)block_buffer); |
| if (res == 1) |
| { |
| struct rigid_disk_block *trdb = (struct rigid_disk_block *)block_buffer; |
| if (trdb->id == AMIGA_ID_RDISK) |
| { |
| PRINTF("Rigid disk block suspect at %d, checking checksum\n",i); |
| if (sum_block((struct block_header *)block_buffer) == 0) |
| { |
| PRINTF("FOUND\n"); |
| memcpy(&rdb, trdb, sizeof(struct rigid_disk_block)); |
| return (struct rigid_disk_block *)&rdb; |
| } |
| } |
| } |
| } |
| PRINTF("Done scanning, no RDB found\n"); |
| return NULL; |
| } |
| |
| /* |
| * Search for boot code |
| * Again, the first boot block must be located somewhere in the first 16 blocks, or rooted in the |
| * Ridgid disk block |
| */ |
| |
| struct bootcode_block *get_bootcode(struct blk_desc *dev_desc) |
| { |
| int i; |
| int limit; |
| char *s; |
| |
| s = getenv("amiga_scanlimit"); |
| if (s) |
| limit = simple_strtoul(s, NULL, 10); |
| else |
| limit = AMIGA_BLOCK_LIMIT; |
| |
| PRINTF("Scanning for BOOT from 0 to %d\n", limit); |
| |
| for (i = 0; i < limit; i++) |
| { |
| ulong res = dev_desc->block_read(dev_desc, i, 1, (ulong *)block_buffer); |
| if (res == 1) |
| { |
| struct bootcode_block *boot = (struct bootcode_block *)block_buffer; |
| if (boot->id == AMIGA_ID_BOOT) |
| { |
| PRINTF("BOOT block at %d, checking checksum\n", i); |
| if (sum_block((struct block_header *)block_buffer) == 0) |
| { |
| PRINTF("Found valid bootcode block\n"); |
| memcpy(&bootcode, boot, sizeof(struct bootcode_block)); |
| return &bootcode; |
| } |
| } |
| } |
| } |
| |
| PRINTF("No boot code found on disk\n"); |
| return 0; |
| } |
| |
| /* |
| * Test if the given partition has an Amiga partition table/Rigid |
| * Disk block |
| */ |
| static int test_part_amiga(struct blk_desc *dev_desc) |
| { |
| struct rigid_disk_block *rdb; |
| struct bootcode_block *bootcode; |
| |
| PRINTF("test_part_amiga: Testing for an Amiga RDB partition\n"); |
| |
| rdb = get_rdisk(dev_desc); |
| if (rdb) |
| { |
| bootcode = get_bootcode(dev_desc); |
| if (bootcode) |
| PRINTF("test_part_amiga: bootable Amiga disk\n"); |
| else |
| PRINTF("test_part_amiga: non-bootable Amiga disk\n"); |
| |
| return 0; |
| } |
| else |
| { |
| PRINTF("test_part_amiga: no RDB found\n"); |
| return -1; |
| } |
| |
| } |
| |
| /* |
| * Find partition number partnum on the given drive. |
| */ |
| static struct partition_block *find_partition(struct blk_desc *dev_desc, |
| int partnum) |
| { |
| struct rigid_disk_block *rdb; |
| struct partition_block *p; |
| u32 block; |
| |
| PRINTF("Trying to find partition block %d\n", partnum); |
| rdb = get_rdisk(dev_desc); |
| if (!rdb) |
| { |
| PRINTF("find_partition: no rdb found\n"); |
| return NULL; |
| } |
| |
| PRINTF("find_partition: Scanning partition list\n"); |
| |
| block = rdb->partition_list; |
| PRINTF("find_partition: partition list at 0x%x\n", block); |
| |
| while (block != 0xFFFFFFFF) |
| { |
| ulong res = dev_desc->block_read(dev_desc, block, 1, |
| (ulong *)block_buffer); |
| if (res == 1) |
| { |
| p = (struct partition_block *)block_buffer; |
| if (p->id == AMIGA_ID_PART) |
| { |
| PRINTF("PART block suspect at 0x%x, checking checksum\n",block); |
| if (sum_block((struct block_header *)p) == 0) |
| { |
| if (partnum == 0) break; |
| else |
| { |
| partnum--; |
| block = p->next; |
| } |
| } |
| } else block = 0xFFFFFFFF; |
| } else block = 0xFFFFFFFF; |
| } |
| |
| if (block == 0xFFFFFFFF) |
| { |
| PRINTF("PART block not found\n"); |
| return NULL; |
| } |
| |
| return (struct partition_block *)block_buffer; |
| } |
| |
| /* |
| * Get info about a partition |
| */ |
| static int part_get_info_amiga(struct blk_desc *dev_desc, int part, |
| disk_partition_t *info) |
| { |
| struct partition_block *p = find_partition(dev_desc, part-1); |
| struct amiga_part_geometry *g; |
| u32 disk_type; |
| |
| if (!p) return -1; |
| |
| g = (struct amiga_part_geometry *)&(p->environment); |
| info->start = g->low_cyl * g->block_per_track * g->surfaces; |
| info->size = (g->high_cyl - g->low_cyl + 1) * g->block_per_track * g->surfaces - 1; |
| info->blksz = rdb.block_bytes; |
| bcpl_strcpy((char *)info->name, p->drive_name); |
| |
| |
| disk_type = g->dos_type; |
| |
| info->type[0] = (disk_type & 0xFF000000)>>24; |
| info->type[1] = (disk_type & 0x00FF0000)>>16; |
| info->type[2] = (disk_type & 0x0000FF00)>>8; |
| info->type[3] = '\\'; |
| info->type[4] = (disk_type & 0x000000FF) + '0'; |
| info->type[5] = 0; |
| |
| return 0; |
| } |
| |
| static void print_part_amiga(struct blk_desc *dev_desc) |
| { |
| struct rigid_disk_block *rdb; |
| struct bootcode_block *boot; |
| struct partition_block *p; |
| u32 block; |
| int i = 1; |
| |
| rdb = get_rdisk(dev_desc); |
| if (!rdb) |
| { |
| PRINTF("print_part_amiga: no rdb found\n"); |
| return; |
| } |
| |
| PRINTF("print_part_amiga: Scanning partition list\n"); |
| |
| block = rdb->partition_list; |
| PRINTF("print_part_amiga: partition list at 0x%x\n", block); |
| |
| printf("Summary: DiskBlockSize: %d\n" |
| " Cylinders : %d\n" |
| " Sectors/Track: %d\n" |
| " Heads : %d\n\n", |
| rdb->block_bytes, rdb->cylinders, rdb->sectors, |
| rdb->heads); |
| |
| printf(" First Num. \n" |
| "Nr. Part. Name Block Block Type Boot Priority\n"); |
| |
| while (block != 0xFFFFFFFF) |
| { |
| ulong res; |
| |
| PRINTF("Trying to load block #0x%X\n", block); |
| |
| res = dev_desc->block_read(dev_desc, block, 1, (ulong *)block_buffer); |
| if (res == 1) |
| { |
| p = (struct partition_block *)block_buffer; |
| if (p->id == AMIGA_ID_PART) |
| { |
| PRINTF("PART block suspect at 0x%x, checking checksum\n",block); |
| if (sum_block((struct block_header *)p) == 0) |
| { |
| printf("%-4d ", i); i++; |
| print_part_info(p); |
| block = p->next; |
| } |
| } else block = 0xFFFFFFFF; |
| } else block = 0xFFFFFFFF; |
| } |
| |
| boot = get_bootcode(dev_desc); |
| if (boot) |
| { |
| printf("Disk is bootable\n"); |
| } |
| } |
| |
| U_BOOT_PART_TYPE(amiga) = { |
| .name = "AMIGA", |
| .part_type = PART_TYPE_AMIGA, |
| .get_info = part_get_info_amiga, |
| .print = print_part_amiga, |
| .test = test_part_amiga, |
| }; |
| |
| #endif |