| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2011-2012 |
| * Pali Rohár <pali@kernel.org> |
| */ |
| |
| #include <config.h> |
| |
| relocaddr: /* address of this relocaddr section after coping */ |
| .word . /* address of section (calculated at compile time) */ |
| |
| startaddr: /* address of u-boot after copying */ |
| .word CONFIG_SYS_TEXT_BASE |
| |
| kernaddr: /* address of kernel after copying */ |
| .word KERNEL_ADDRESS |
| |
| kernsize: /* maximal size of kernel image */ |
| .word KERNEL_MAXSIZE |
| |
| kernoffs: /* offset of kernel image in loaded u-boot */ |
| .word KERNEL_OFFSET |
| |
| imagesize: /* maximal size of image */ |
| .word IMAGE_MAXSIZE |
| |
| ih_magic: /* IH_MAGIC in big endian from include/image.h */ |
| .word 0x56190527 |
| |
| /* |
| * Routine: save_boot_params (called after reset from start.S) |
| * Description: Copy attached kernel to address KERNEL_ADDRESS |
| * Copy u-boot to address CONFIG_SYS_TEXT_BASE |
| * Return to copied u-boot address |
| */ |
| |
| .global save_boot_params |
| save_boot_params: |
| /* Get return address */ |
| ldr lr, =save_boot_params_ret |
| |
| /* Copy valid attached kernel to address KERNEL_ADDRESS */ |
| |
| copy_kernel_start: |
| adr r0, relocaddr /* r0 - address of section relocaddr */ |
| ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ |
| cmp r0, r1 |
| |
| /* r4 - calculated offset */ |
| subhi r4, r0, r1 |
| sublo r4, r1, r0 |
| |
| /* r0 - start of kernel before */ |
| ldr r0, startaddr |
| addhi r0, r0, r4 |
| sublo r0, r0, r4 |
| ldr r1, kernoffs |
| add r0, r0, r1 |
| |
| /* r3 - start of kernel after */ |
| ldr r3, kernaddr |
| |
| /* r2 - end of kernel after */ |
| ldr r1, kernsize |
| add r2, r3, r1 |
| |
| /* r1 - end of kernel before */ |
| add r1, r0, r1 |
| |
| /* remove header in target kernel */ |
| mov r5, #0 |
| str r5, [r3] |
| |
| /* check for valid kernel uImage */ |
| ldr r4, [r0] /* r4 - 4 bytes header of kernel */ |
| ldr r5, ih_magic /* r5 - IH_MAGIC */ |
| cmp r4, r5 |
| bne copy_kernel_end /* skip if invalid image */ |
| |
| copy_kernel_loop: |
| ldmdb r1!, {r3 - r10} |
| stmdb r2!, {r3 - r10} |
| cmp r1, r0 |
| bhi copy_kernel_loop |
| |
| copy_kernel_end: |
| mov r5, #0 |
| str r5, [r0] /* remove 4 bytes header of kernel */ |
| |
| |
| /* Fix u-boot code */ |
| |
| fix_start: |
| adr r0, relocaddr /* r0 - address of section relocaddr */ |
| ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ |
| cmp r0, r1 |
| |
| beq copy_uboot_end /* skip if u-boot is on correct address */ |
| |
| /* r5 - calculated offset */ |
| subhi r5, r0, r1 |
| sublo r5, r1, r0 |
| |
| /* r6 - maximal u-boot size */ |
| ldr r6, imagesize |
| |
| /* r1 - start of u-boot after */ |
| ldr r1, startaddr |
| |
| /* r0 - start of u-boot before */ |
| addhi r0, r1, r5 |
| sublo r0, r1, r5 |
| |
| /* check if we need to move uboot copy code before calling it */ |
| cmp r5, r6 |
| bhi copy_uboot_start /* now coping u-boot code directly is safe */ |
| |
| |
| copy_code_start: |
| /* r0 - start of u-boot before */ |
| /* r1 - start of u-boot after */ |
| /* r6 - maximal u-boot size */ |
| |
| /* r7 - maximal kernel size */ |
| ldr r7, kernsize |
| |
| /* r4 - end of kernel before */ |
| add r4, r0, r6 |
| add r4, r4, r7 |
| |
| /* r5 - end of u-boot after */ |
| ldr r5, startaddr |
| add r5, r5, r6 |
| |
| /* r2 - start of loop code after */ |
| cmp r4, r5 /* higher address (r4 or r5) */ |
| movhs r2, r4 |
| movlo r2, r5 |
| |
| /* r3 - end of loop code before */ |
| adr r3, end |
| |
| /* r4 - end of loop code after */ |
| adr r4, copy_uboot_start |
| sub r4, r3, r4 |
| add r4, r2, r4 |
| |
| copy_code_loop: |
| ldmdb r3!, {r7 - r10} |
| stmdb r4!, {r7 - r10} |
| cmp r4, r2 |
| bhi copy_code_loop |
| |
| copy_code_end: |
| mov pc, r2 |
| |
| |
| /* |
| * Copy u-boot to address CONFIG_SYS_TEXT_BASE |
| * |
| * Nokia X-Loader loading secondary image to address 0x80400000 |
| * NOLO loading boot image to random place, so it doesn't really |
| * matter what is set in CONFIG_SYS_TEXT_BASE. We have to copy |
| * u-boot to CONFIG_SYS_TEXT_BASE address. |
| */ |
| |
| copy_uboot_start: |
| /* r0 - start of u-boot before */ |
| /* r1 - start of u-boot after */ |
| /* r6 - maximal u-boot size */ |
| |
| /* r2 - end of u-boot after */ |
| add r2, r1, r6 |
| |
| /* condition for copying from left to right */ |
| cmp r0, r1 |
| addlo r1, r0, r6 /* r1 - end of u-boot before */ |
| blo copy_uboot_loop_right |
| |
| copy_uboot_loop_left: |
| ldmia r0!, {r3 - r10} |
| stmia r1!, {r3 - r10} |
| cmp r1, r2 |
| blo copy_uboot_loop_left |
| b copy_uboot_end |
| |
| copy_uboot_loop_right: |
| ldmdb r1!, {r3 - r10} |
| stmdb r2!, {r3 - r10} |
| cmp r1, r0 |
| bhi copy_uboot_loop_right |
| |
| copy_uboot_end: |
| bx lr |
| |
| end: |