| /* |
| * (C) Copyright 2013 Altera Corporation <www.altera.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <dwmmc.h> |
| #include <errno.h> |
| #include <asm/arch/dwmmc.h> |
| #include <asm/arch/clock_manager.h> |
| #include <asm/arch/system_manager.h> |
| |
| static const struct socfpga_clock_manager *clock_manager_base = |
| (void *)SOCFPGA_CLKMGR_ADDRESS; |
| static const struct socfpga_system_manager *system_manager_base = |
| (void *)SOCFPGA_SYSMGR_ADDRESS; |
| |
| /* socfpga implmentation specific drver private data */ |
| struct dwmci_socfpga_priv_data { |
| unsigned int drvsel; |
| unsigned int smplsel; |
| }; |
| |
| static void socfpga_dwmci_clksel(struct dwmci_host *host) |
| { |
| struct dwmci_socfpga_priv_data *priv = host->priv; |
| |
| /* Disable SDMMC clock. */ |
| clrbits_le32(&clock_manager_base->per_pll.en, |
| CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK); |
| |
| debug("%s: drvsel %d smplsel %d\n", __func__, |
| priv->drvsel, priv->smplsel); |
| writel(SYSMGR_SDMMC_CTRL_SET(priv->smplsel, priv->drvsel), |
| &system_manager_base->sdmmcgrp_ctrl); |
| |
| debug("%s: SYSMGR_SDMMCGRP_CTRL_REG = 0x%x\n", __func__, |
| readl(&system_manager_base->sdmmcgrp_ctrl)); |
| |
| /* Enable SDMMC clock */ |
| setbits_le32(&clock_manager_base->per_pll.en, |
| CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK); |
| } |
| |
| static int socfpga_dwmci_of_probe(const void *blob, int node, const int idx) |
| { |
| /* FIXME: probe from DT eventually too/ */ |
| const unsigned long clk = cm_get_mmc_controller_clk_hz(); |
| |
| struct dwmci_host *host; |
| struct dwmci_socfpga_priv_data *priv; |
| fdt_addr_t reg_base; |
| int bus_width, fifo_depth; |
| |
| if (clk == 0) { |
| printf("DWMMC%d: MMC clock is zero!", idx); |
| return -EINVAL; |
| } |
| |
| /* Get the register address from the device node */ |
| reg_base = fdtdec_get_addr(blob, node, "reg"); |
| if (!reg_base) { |
| printf("DWMMC%d: Can't get base address\n", idx); |
| return -EINVAL; |
| } |
| |
| /* Get the bus width from the device node */ |
| bus_width = fdtdec_get_int(blob, node, "bus-width", 0); |
| if (bus_width <= 0) { |
| printf("DWMMC%d: Can't get bus-width\n", idx); |
| return -EINVAL; |
| } |
| |
| fifo_depth = fdtdec_get_int(blob, node, "fifo-depth", 0); |
| if (fifo_depth < 0) { |
| printf("DWMMC%d: Can't get FIFO depth\n", idx); |
| return -EINVAL; |
| } |
| |
| /* Allocate the host */ |
| host = calloc(1, sizeof(*host)); |
| if (!host) |
| return -ENOMEM; |
| |
| /* Allocate the priv */ |
| priv = calloc(1, sizeof(*priv)); |
| if (!priv) { |
| free(host); |
| return -ENOMEM; |
| } |
| |
| host->name = "SOCFPGA DWMMC"; |
| host->ioaddr = (void *)reg_base; |
| host->buswidth = bus_width; |
| host->clksel = socfpga_dwmci_clksel; |
| host->dev_index = idx; |
| /* Fixed clock divide by 4 which due to the SDMMC wrapper */ |
| host->bus_hz = clk; |
| host->fifoth_val = MSIZE(0x2) | |
| RX_WMARK(fifo_depth / 2 - 1) | TX_WMARK(fifo_depth / 2); |
| priv->drvsel = fdtdec_get_uint(blob, node, "drvsel", 3); |
| priv->smplsel = fdtdec_get_uint(blob, node, "smplsel", 0); |
| host->priv = priv; |
| |
| return add_dwmci(host, host->bus_hz, 400000); |
| } |
| |
| static int socfpga_dwmci_process_node(const void *blob, int nodes[], |
| int count) |
| { |
| int i, node, ret; |
| |
| for (i = 0; i < count; i++) { |
| node = nodes[i]; |
| if (node <= 0) |
| continue; |
| |
| ret = socfpga_dwmci_of_probe(blob, node, i); |
| if (ret) { |
| printf("%s: failed to decode dev %d\n", __func__, i); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| int socfpga_dwmmc_init(const void *blob) |
| { |
| int nodes[2]; /* Max. two controllers. */ |
| int ret, count; |
| |
| count = fdtdec_find_aliases_for_id(blob, "mmc", |
| COMPAT_ALTERA_SOCFPGA_DWMMC, |
| nodes, ARRAY_SIZE(nodes)); |
| |
| ret = socfpga_dwmci_process_node(blob, nodes, count); |
| |
| return ret; |
| } |