blob: 5456c10fb177041eba1a0da41c5939fcdf7b0ae6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017-2019 NXP
*
* Peng Fan <peng.fan@nxp.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <log.h>
#include <asm/arch/imx-regs.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/hab.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/syscounter.h>
#include <asm/ptrace.h>
#include <asm/armv8/mmu.h>
#include <dm/uclass.h>
#include <efi_loader.h>
#include <env.h>
#include <env_internal.h>
#include <errno.h>
#include <fdt_support.h>
#include <fsl_wdog.h>
#include <imx_sip.h>
#include <linux/arm-smccc.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
.word = 3,
};
#endif
int timer_init(void)
{
#ifdef CONFIG_SPL_BUILD
struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR;
unsigned long freq = readl(&sctr->cntfid0);
/* Update with accurate clock frequency */
asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory");
clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1,
SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG);
#endif
gd->arch.tbl = 0;
gd->arch.tbu = 0;
return 0;
}
void enable_tzc380(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
/* Enable TZASC and lock setting */
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
if (is_imx8mm() || is_imx8mn() || is_imx8mp())
setbits_le32(&gpr->gpr[10], BIT(1));
/*
* set Region 0 attribute to allow secure and non-secure
* read/write permission. Found some masters like usb dwc3
* controllers can't work with secure memory.
*/
writel(0xf0000000, TZASC_BASE_ADDR + 0x108);
}
void set_wdog_reset(struct wdog_regs *wdog)
{
/*
* Output WDOG_B signal to reset external pmic or POR_B decided by
* the board design. Without external reset, the peripherals/DDR/
* PMIC are not reset, that may cause system working abnormal.
* WDZST bit is write-once only bit. Align this bit in kernel,
* otherwise kernel code will have no chance to set this bit.
*/
setbits_le16(&wdog->wcr, WDOG_WDT_MASK | WDOG_WDZST_MASK);
}
static struct mm_region imx8m_mem_map[] = {
{
/* ROM */
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0x100000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
}, {
/* CAAM */
.virt = 0x100000UL,
.phys = 0x100000UL,
.size = 0x8000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* TCM */
.virt = 0x7C0000UL,
.phys = 0x7C0000UL,
.size = 0x80000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* OCRAM */
.virt = 0x900000UL,
.phys = 0x900000UL,
.size = 0x200000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
}, {
/* AIPS */
.virt = 0xB00000UL,
.phys = 0xB00000UL,
.size = 0x3f500000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* DRAM1 */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = PHYS_SDRAM_SIZE,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
#ifdef PHYS_SDRAM_2_SIZE
}, {
/* DRAM2 */
.virt = 0x100000000UL,
.phys = 0x100000000UL,
.size = PHYS_SDRAM_2_SIZE,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
#endif
}, {
/* empty entrie to split table entry 5 if needed when TEEs are used */
0,
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = imx8m_mem_map;
void enable_caches(void)
{
/* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch */
if (rom_pointer[1]) {
/*
* TEE are loaded, So the ddr bank structures
* have been modified update mmu table accordingly
*/
int i = 0;
/*
* please make sure that entry initial value matches
* imx8m_mem_map for DRAM1
*/
int entry = 5;
u64 attrs = imx8m_mem_map[entry].attrs;
while (i < CONFIG_NR_DRAM_BANKS && entry < 8) {
if (gd->bd->bi_dram[i].start == 0)
break;
imx8m_mem_map[entry].phys = gd->bd->bi_dram[i].start;
imx8m_mem_map[entry].virt = gd->bd->bi_dram[i].start;
imx8m_mem_map[entry].size = gd->bd->bi_dram[i].size;
imx8m_mem_map[entry].attrs = attrs;
debug("Added memory mapping (%d): %llx %llx\n", entry,
imx8m_mem_map[entry].phys, imx8m_mem_map[entry].size);
i++; entry++;
}
}
icache_enable();
dcache_enable();
}
__weak int board_phys_sdram_size(phys_size_t *size)
{
if (!size)
return -EINVAL;
*size = PHYS_SDRAM_SIZE;
return 0;
}
int dram_init(void)
{
phys_size_t sdram_size;
int ret;
ret = board_phys_sdram_size(&sdram_size);
if (ret)
return ret;
/* rom_pointer[1] contains the size of TEE occupies */
if (rom_pointer[1])
gd->ram_size = sdram_size - rom_pointer[1];
else
gd->ram_size = sdram_size;
/* also update the SDRAM size in the mem_map used externally */
imx8m_mem_map[5].size = sdram_size;
#ifdef PHYS_SDRAM_2_SIZE
gd->ram_size += PHYS_SDRAM_2_SIZE;
#endif
return 0;
}
int dram_init_banksize(void)
{
int bank = 0;
int ret;
phys_size_t sdram_size;
ret = board_phys_sdram_size(&sdram_size);
if (ret)
return ret;
gd->bd->bi_dram[bank].start = PHYS_SDRAM;
if (rom_pointer[1]) {
phys_addr_t optee_start = (phys_addr_t)rom_pointer[0];
phys_size_t optee_size = (size_t)rom_pointer[1];
gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start;
if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_size)) {
if (++bank >= CONFIG_NR_DRAM_BANKS) {
puts("CONFIG_NR_DRAM_BANKS is not enough\n");
return -1;
}
gd->bd->bi_dram[bank].start = optee_start + optee_size;
gd->bd->bi_dram[bank].size = PHYS_SDRAM +
sdram_size - gd->bd->bi_dram[bank].start;
}
} else {
gd->bd->bi_dram[bank].size = sdram_size;
}
#ifdef PHYS_SDRAM_2_SIZE
if (++bank >= CONFIG_NR_DRAM_BANKS) {
puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n");
return -1;
}
gd->bd->bi_dram[bank].start = PHYS_SDRAM_2;
gd->bd->bi_dram[bank].size = PHYS_SDRAM_2_SIZE;
#endif
return 0;
}
phys_size_t get_effective_memsize(void)
{
/* return the first bank as effective memory */
if (rom_pointer[1])
return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM);
#ifdef PHYS_SDRAM_2_SIZE
return gd->ram_size - PHYS_SDRAM_2_SIZE;
#else
return gd->ram_size;
#endif
}
static u32 get_cpu_variant_type(u32 type)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
u32 value = readl(&fuse->tester4);
if (type == MXC_CPU_IMX8MQ) {
if ((value & 0x3) == 0x2)
return MXC_CPU_IMX8MD;
else if (value & 0x200000)
return MXC_CPU_IMX8MQL;
} else if (type == MXC_CPU_IMX8MM) {
switch (value & 0x3) {
case 2:
if (value & 0x1c0000)
return MXC_CPU_IMX8MMDL;
else
return MXC_CPU_IMX8MMD;
case 3:
if (value & 0x1c0000)
return MXC_CPU_IMX8MMSL;
else
return MXC_CPU_IMX8MMS;
default:
if (value & 0x1c0000)
return MXC_CPU_IMX8MML;
break;
}
} else if (type == MXC_CPU_IMX8MN) {
switch (value & 0x3) {
case 2:
if (value & 0x1000000)
return MXC_CPU_IMX8MNDL;
else
return MXC_CPU_IMX8MND;
case 3:
if (value & 0x1000000)
return MXC_CPU_IMX8MNSL;
else
return MXC_CPU_IMX8MNS;
default:
if (value & 0x1000000)
return MXC_CPU_IMX8MNL;
break;
}
} else if (type == MXC_CPU_IMX8MP) {
u32 value0 = readl(&fuse->tester3);
u32 flag = 0;
if ((value0 & 0xc0000) == 0x80000)
return MXC_CPU_IMX8MPD;
/* vpu disabled */
if ((value0 & 0x43000000) == 0x43000000)
flag = 1;
/* npu disabled*/
if ((value & 0x8) == 0x8)
flag |= (1 << 1);
/* isp disabled */
if ((value & 0x3) == 0x3)
flag |= (1 << 2);
switch (flag) {
case 7:
return MXC_CPU_IMX8MPL;
case 2:
return MXC_CPU_IMX8MP6;
default:
break;
}
}
return type;
}
u32 get_cpu_rev(void)
{
struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
u32 reg = readl(&ana_pll->digprog);
u32 type = (reg >> 16) & 0xff;
u32 major_low = (reg >> 8) & 0xff;
u32 rom_version;
reg &= 0xff;
/* iMX8MP */
if (major_low == 0x43) {
type = get_cpu_variant_type(MXC_CPU_IMX8MP);
} else if (major_low == 0x42) {
/* iMX8MN */
type = get_cpu_variant_type(MXC_CPU_IMX8MN);
} else if (major_low == 0x41) {
type = get_cpu_variant_type(MXC_CPU_IMX8MM);
} else {
if (reg == CHIP_REV_1_0) {
/*
* For B0 chip, the DIGPROG is not updated,
* it is still TO1.0. we have to check ROM
* version or OCOTP_READ_FUSE_DATA.
* 0xff0055aa is magic number for B1.
*/
if (readl((void __iomem *)(OCOTP_BASE_ADDR + 0x40)) == 0xff0055aa) {
reg = CHIP_REV_2_1;
} else {
rom_version =
readl((void __iomem *)ROM_VERSION_A0);
if (rom_version != CHIP_REV_1_0) {
rom_version = readl((void __iomem *)ROM_VERSION_B0);
rom_version &= 0xff;
if (rom_version == CHIP_REV_2_0)
reg = CHIP_REV_2_0;
}
}
}
type = get_cpu_variant_type(type);
}
return (type << 12) | reg;
}
static void imx_set_wdog_powerdown(bool enable)
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
writew(enable, &wdog2->wmcr);
writew(enable, &wdog3->wmcr);
}
int arch_cpu_init_dm(void)
{
struct udevice *dev;
int ret;
if (CONFIG_IS_ENABLED(CLK)) {
ret = uclass_get_device_by_name(UCLASS_CLK,
"clock-controller@30380000",
&dev);
if (ret < 0) {
printf("Failed to find clock node. Check device tree\n");
return ret;
}
}
return 0;
}
int arch_cpu_init(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
/*
* ROM might disable clock for SCTR,
* enable the clock before timer_init.
*/
if (IS_ENABLED(CONFIG_SPL_BUILD))
clock_enable(CCGR_SCTR, 1);
/*
* Init timer at very early state, because sscg pll setting
* will use it
*/
timer_init();
if (IS_ENABLED(CONFIG_SPL_BUILD)) {
clock_init();
imx_set_wdog_powerdown(false);
if (is_imx8md() || is_imx8mmd() || is_imx8mmdl() || is_imx8mms() ||
is_imx8mmsl() || is_imx8mnd() || is_imx8mndl() || is_imx8mns() ||
is_imx8mnsl() || is_imx8mpd()) {
/* Power down cpu core 1, 2 and 3 for iMX8M Dual core or Single core */
struct pgc_reg *pgc_core1 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x840);
struct pgc_reg *pgc_core2 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x880);
struct pgc_reg *pgc_core3 = (struct pgc_reg *)(GPC_BASE_ADDR + 0x8C0);
struct gpc_reg *gpc = (struct gpc_reg *)GPC_BASE_ADDR;
writel(0x1, &pgc_core2->pgcr);
writel(0x1, &pgc_core3->pgcr);
if (is_imx8mms() || is_imx8mmsl() || is_imx8mns() || is_imx8mnsl()) {
writel(0x1, &pgc_core1->pgcr);
writel(0xE, &gpc->cpu_pgc_dn_trg);
} else {
writel(0xC, &gpc->cpu_pgc_dn_trg);
}
}
}
if (is_imx8mq()) {
clock_enable(CCGR_OCOTP, 1);
if (readl(&ocotp->ctrl) & 0x200)
writel(0x200, &ocotp->ctrl_clr);
}
return 0;
}
#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
struct rom_api *g_rom_api = (struct rom_api *)0x980;
enum boot_device get_boot_device(void)
{
volatile gd_t *pgd = gd;
int ret;
u32 boot;
u16 boot_type;
u8 boot_instance;
enum boot_device boot_dev = SD1_BOOT;
ret = g_rom_api->query_boot_infor(QUERY_BT_DEV, &boot,
((uintptr_t)&boot) ^ QUERY_BT_DEV);
gd = pgd;
if (ret != ROM_API_OKAY) {
puts("ROMAPI: failure at query_boot_info\n");
return -1;
}
boot_type = boot >> 16;
boot_instance = (boot >> 8) & 0xff;
switch (boot_type) {
case BT_DEV_TYPE_SD:
boot_dev = boot_instance + SD1_BOOT;
break;
case BT_DEV_TYPE_MMC:
boot_dev = boot_instance + MMC1_BOOT;
break;
case BT_DEV_TYPE_NAND:
boot_dev = NAND_BOOT;
break;
case BT_DEV_TYPE_FLEXSPINOR:
boot_dev = QSPI_BOOT;
break;
case BT_DEV_TYPE_USB:
boot_dev = USB_BOOT;
break;
default:
break;
}
return boot_dev;
}
#endif
bool is_usb_boot(void)
{
return get_boot_device() == USB_BOOT;
}
#ifdef CONFIG_OF_SYSTEM_SETUP
bool check_fdt_new_path(void *blob)
{
const char *soc_path = "/soc@0";
int nodeoff;
nodeoff = fdt_path_offset(blob, soc_path);
if (nodeoff < 0)
return false;
return true;
}
static int disable_fdt_nodes(void *blob, const char *const nodes_path[], int size_array)
{
int i = 0;
int rc;
int nodeoff;
const char *status = "disabled";
for (i = 0; i < size_array; i++) {
nodeoff = fdt_path_offset(blob, nodes_path[i]);
if (nodeoff < 0)
continue; /* Not found, skip it */
printf("Found %s node\n", nodes_path[i]);
add_status:
rc = fdt_setprop(blob, nodeoff, "status", status, strlen(status) + 1);
if (rc) {
if (rc == -FDT_ERR_NOSPACE) {
rc = fdt_increase_size(blob, 512);
if (!rc)
goto add_status;
}
printf("Unable to update property %s:%s, err=%s\n",
nodes_path[i], "status", fdt_strerror(rc));
} else {
printf("Modify %s:%s disabled\n",
nodes_path[i], "status");
}
}
return 0;
}
#ifdef CONFIG_IMX8MQ
bool check_dcss_fused(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
u32 value = readl(&fuse->tester4);
if (value & 0x4000000)
return true;
return false;
}
static int disable_mipi_dsi_nodes(void *blob)
{
static const char * const nodes_path[] = {
"/mipi_dsi@30A00000",
"/mipi_dsi_bridge@30A00000",
"/dsi_phy@30A00300",
"/soc@0/bus@30800000/mipi_dsi@30a00000",
"/soc@0/bus@30800000/dphy@30a00300"
};
return disable_fdt_nodes(blob, nodes_path, ARRAY_SIZE(nodes_path));
}
static int disable_dcss_nodes(void *blob)
{
static const char * const nodes_path[] = {
"/dcss@0x32e00000",
"/dcss@32e00000",
"/hdmi@32c00000",
"/hdmi_cec@32c33800",
"/hdmi_drm@32c00000",
"/display-subsystem",
"/sound-hdmi",
"/sound-hdmi-arc",
"/soc@0/bus@32c00000/display-controller@32e00000",
"/soc@0/bus@32c00000/hdmi@32c00000",
};
return disable_fdt_nodes(blob, nodes_path, ARRAY_SIZE(nodes_path));
}
static int check_mipi_dsi_nodes(void *blob)
{
static const char * const lcdif_path[] = {
"/lcdif@30320000",
"/soc@0/bus@30000000/lcdif@30320000"
};
static const char * const mipi_dsi_path[] = {
"/mipi_dsi@30A00000",
"/soc@0/bus@30800000/mipi_dsi@30a00000"
};
static const char * const lcdif_ep_path[] = {
"/lcdif@30320000/port@0/mipi-dsi-endpoint",
"/soc@0/bus@30000000/lcdif@30320000/port@0/endpoint"
};
static const char * const mipi_dsi_ep_path[] = {
"/mipi_dsi@30A00000/port@1/endpoint",
"/soc@0/bus@30800000/mipi_dsi@30a00000/ports/port@0/endpoint"
};
int lookup_node;
int nodeoff;
bool new_path = check_fdt_new_path(blob);
int i = new_path ? 1 : 0;
nodeoff = fdt_path_offset(blob, lcdif_path[i]);
if (nodeoff < 0 || !fdtdec_get_is_enabled(blob, nodeoff)) {
/*
* If can't find lcdif node or lcdif node is disabled,
* then disable all mipi dsi, since they only can input
* from DCSS
*/
return disable_mipi_dsi_nodes(blob);
}
nodeoff = fdt_path_offset(blob, mipi_dsi_path[i]);
if (nodeoff < 0 || !fdtdec_get_is_enabled(blob, nodeoff))
return 0;
nodeoff = fdt_path_offset(blob, lcdif_ep_path[i]);
if (nodeoff < 0) {
/*
* If can't find lcdif endpoint, then disable all mipi dsi,
* since they only can input from DCSS
*/
return disable_mipi_dsi_nodes(blob);
}
lookup_node = fdtdec_lookup_phandle(blob, nodeoff, "remote-endpoint");
nodeoff = fdt_path_offset(blob, mipi_dsi_ep_path[i]);
if (nodeoff > 0 && nodeoff == lookup_node)
return 0;
return disable_mipi_dsi_nodes(blob);
}
#endif
int disable_vpu_nodes(void *blob)
{
static const char * const nodes_path_8mq[] = {
"/vpu@38300000",
"/soc@0/vpu@38300000"
};
static const char * const nodes_path_8mm[] = {
"/vpu_g1@38300000",
"/vpu_g2@38310000",
"/vpu_h1@38320000"
};
static const char * const nodes_path_8mp[] = {
"/vpu_g1@38300000",
"/vpu_g2@38310000",
"/vpu_vc8000e@38320000"
};
if (is_imx8mq())
return disable_fdt_nodes(blob, nodes_path_8mq, ARRAY_SIZE(nodes_path_8mq));
else if (is_imx8mm())
return disable_fdt_nodes(blob, nodes_path_8mm, ARRAY_SIZE(nodes_path_8mm));
else if (is_imx8mp())
return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
else
return -EPERM;
}
int disable_gpu_nodes(void *blob)
{
static const char * const nodes_path_8mn[] = {
"/gpu@38000000"
};
return disable_fdt_nodes(blob, nodes_path_8mn, ARRAY_SIZE(nodes_path_8mn));
}
int disable_npu_nodes(void *blob)
{
static const char * const nodes_path_8mp[] = {
"/vipsi@38500000"
};
return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
}
int disable_isp_nodes(void *blob)
{
static const char * const nodes_path_8mp[] = {
"/soc@0/bus@32c00000/camera/isp@32e10000",
"/soc@0/bus@32c00000/camera/isp@32e20000"
};
return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
}
int disable_dsp_nodes(void *blob)
{
static const char * const nodes_path_8mp[] = {
"/dsp@3b6e8000"
};
return disable_fdt_nodes(blob, nodes_path_8mp, ARRAY_SIZE(nodes_path_8mp));
}
static int disable_cpu_nodes(void *blob, u32 disabled_cores)
{
static const char * const nodes_path[] = {
"/cpus/cpu@1",
"/cpus/cpu@2",
"/cpus/cpu@3",
};
u32 i = 0;
int rc;
int nodeoff;
if (disabled_cores > 3)
return -EINVAL;
i = 3 - disabled_cores;
for (; i < 3; i++) {
nodeoff = fdt_path_offset(blob, nodes_path[i]);
if (nodeoff < 0)
continue; /* Not found, skip it */
debug("Found %s node\n", nodes_path[i]);
rc = fdt_del_node(blob, nodeoff);
if (rc < 0) {
printf("Unable to delete node %s, err=%s\n",
nodes_path[i], fdt_strerror(rc));
} else {
printf("Delete node %s\n", nodes_path[i]);
}
}
return 0;
}
int ft_system_setup(void *blob, struct bd_info *bd)
{
#ifdef CONFIG_IMX8MQ
int i = 0;
int rc;
int nodeoff;
if (get_boot_device() == USB_BOOT) {
disable_dcss_nodes(blob);
bool new_path = check_fdt_new_path(blob);
int v = new_path ? 1 : 0;
static const char * const usb_dwc3_path[] = {
"/usb@38100000/dwc3",
"/soc@0/usb@38100000"
};
nodeoff = fdt_path_offset(blob, usb_dwc3_path[v]);
if (nodeoff >= 0) {
const char *speed = "high-speed";
printf("Found %s node\n", usb_dwc3_path[v]);
usb_modify_speed:
rc = fdt_setprop(blob, nodeoff, "maximum-speed", speed, strlen(speed) + 1);
if (rc) {
if (rc == -FDT_ERR_NOSPACE) {
rc = fdt_increase_size(blob, 512);
if (!rc)
goto usb_modify_speed;
}
printf("Unable to set property %s:%s, err=%s\n",
usb_dwc3_path[v], "maximum-speed", fdt_strerror(rc));
} else {
printf("Modify %s:%s = %s\n",
usb_dwc3_path[v], "maximum-speed", speed);
}
} else {
printf("Can't found %s node\n", usb_dwc3_path[v]);
}
}
/* Disable the CPU idle for A0 chip since the HW does not support it */
if (is_soc_rev(CHIP_REV_1_0)) {
static const char * const nodes_path[] = {
"/cpus/cpu@0",
"/cpus/cpu@1",
"/cpus/cpu@2",
"/cpus/cpu@3",
};
for (i = 0; i < ARRAY_SIZE(nodes_path); i++) {
nodeoff = fdt_path_offset(blob, nodes_path[i]);
if (nodeoff < 0)
continue; /* Not found, skip it */
debug("Found %s node\n", nodes_path[i]);
rc = fdt_delprop(blob, nodeoff, "cpu-idle-states");
if (rc == -FDT_ERR_NOTFOUND)
continue;
if (rc) {
printf("Unable to update property %s:%s, err=%s\n",
nodes_path[i], "status", fdt_strerror(rc));
return rc;
}
debug("Remove %s:%s\n", nodes_path[i],
"cpu-idle-states");
}
}
if (is_imx8mql()) {
disable_vpu_nodes(blob);
if (check_dcss_fused()) {
printf("DCSS is fused\n");
disable_dcss_nodes(blob);
check_mipi_dsi_nodes(blob);
}
}
if (is_imx8md())
disable_cpu_nodes(blob, 2);
#elif defined(CONFIG_IMX8MM)
if (is_imx8mml() || is_imx8mmdl() || is_imx8mmsl())
disable_vpu_nodes(blob);
if (is_imx8mmd() || is_imx8mmdl())
disable_cpu_nodes(blob, 2);
else if (is_imx8mms() || is_imx8mmsl())
disable_cpu_nodes(blob, 3);
#elif defined(CONFIG_IMX8MN)
if (is_imx8mnl() || is_imx8mndl() || is_imx8mnsl())
disable_gpu_nodes(blob);
if (is_imx8mnd() || is_imx8mndl())
disable_cpu_nodes(blob, 2);
else if (is_imx8mns() || is_imx8mnsl())
disable_cpu_nodes(blob, 3);
#elif defined(CONFIG_IMX8MP)
if (is_imx8mpl())
disable_vpu_nodes(blob);
if (is_imx8mpl() || is_imx8mp6())
disable_npu_nodes(blob);
if (is_imx8mpl())
disable_isp_nodes(blob);
if (is_imx8mpl() || is_imx8mp6())
disable_dsp_nodes(blob);
if (is_imx8mpd())
disable_cpu_nodes(blob, 2);
#endif
return 0;
}
#endif
#if !CONFIG_IS_ENABLED(SYSRESET)
void reset_cpu(ulong addr)
{
struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
/* Clear WDA to trigger WDOG_B immediately */
writew((SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS), &wdog->wcr);
while (1) {
/*
* spin for .5 seconds before reset
*/
}
}
#endif
#if defined(CONFIG_ARCH_MISC_INIT)
static void acquire_buildinfo(void)
{
u64 atf_commit = 0;
struct arm_smccc_res res;
/* Get ARM Trusted Firmware commit id */
arm_smccc_smc(IMX_SIP_BUILDINFO, IMX_SIP_BUILDINFO_GET_COMMITHASH,
0, 0, 0, 0, 0, 0, &res);
atf_commit = res.a0;
if (atf_commit == 0xffffffff) {
debug("ATF does not support build info\n");
atf_commit = 0x30; /* Display 0, 0 ascii is 0x30 */
}
printf("\n BuildInfo:\n - ATF %s\n\n", (char *)&atf_commit);
}
int arch_misc_init(void)
{
acquire_buildinfo();
return 0;
}
#endif
void imx_tmu_arch_init(void *reg_base)
{
if (is_imx8mm() || is_imx8mn()) {
/* Load TCALIV and TASR from fuses */
struct ocotp_regs *ocotp =
(struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[3];
struct fuse_bank3_regs *fuse =
(struct fuse_bank3_regs *)bank->fuse_regs;
u32 tca_rt, tca_hr, tca_en;
u32 buf_vref, buf_slope;
tca_rt = fuse->ana0 & 0xFF;
tca_hr = (fuse->ana0 & 0xFF00) >> 8;
tca_en = (fuse->ana0 & 0x2000000) >> 25;
buf_vref = (fuse->ana0 & 0x1F00000) >> 20;
buf_slope = (fuse->ana0 & 0xF0000) >> 16;
writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28);
writel((tca_en << 31) | (tca_hr << 16) | tca_rt,
(ulong)reg_base + 0x30);
}
#ifdef CONFIG_IMX8MP
/* Load TCALIV0/1/m40 and TRIM from fuses */
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
struct fuse_bank *bank = &ocotp->bank[38];
struct fuse_bank38_regs *fuse =
(struct fuse_bank38_regs *)bank->fuse_regs;
struct fuse_bank *bank2 = &ocotp->bank[39];
struct fuse_bank39_regs *fuse2 =
(struct fuse_bank39_regs *)bank2->fuse_regs;
u32 buf_vref, buf_slope, bjt_cur, vlsb, bgr;
u32 reg;
u32 tca40[2], tca25[2], tca105[2];
/* For blank sample */
if (!fuse->ana_trim2 && !fuse->ana_trim3 &&
!fuse->ana_trim4 && !fuse2->ana_trim5) {
/* Use a default 25C binary codes */
tca25[0] = 1596;
tca25[1] = 1596;
writel(tca25[0], (ulong)reg_base + 0x30);
writel(tca25[1], (ulong)reg_base + 0x34);
return;
}
buf_vref = (fuse->ana_trim2 & 0xc0) >> 6;
buf_slope = (fuse->ana_trim2 & 0xF00) >> 8;
bjt_cur = (fuse->ana_trim2 & 0xF000) >> 12;
bgr = (fuse->ana_trim2 & 0xF0000) >> 16;
vlsb = (fuse->ana_trim2 & 0xF00000) >> 20;
writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28);
reg = (bgr << 28) | (bjt_cur << 20) | (vlsb << 12) | (1 << 7);
writel(reg, (ulong)reg_base + 0x3c);
tca40[0] = (fuse->ana_trim3 & 0xFFF0000) >> 16;
tca25[0] = (fuse->ana_trim3 & 0xF0000000) >> 28;
tca25[0] |= ((fuse->ana_trim4 & 0xFF) << 4);
tca105[0] = (fuse->ana_trim4 & 0xFFF00) >> 8;
tca40[1] = (fuse->ana_trim4 & 0xFFF00000) >> 20;
tca25[1] = fuse2->ana_trim5 & 0xFFF;
tca105[1] = (fuse2->ana_trim5 & 0xFFF000) >> 12;
/* use 25c for 1p calibration */
writel(tca25[0] | (tca105[0] << 16), (ulong)reg_base + 0x30);
writel(tca25[1] | (tca105[1] << 16), (ulong)reg_base + 0x34);
writel(tca40[0] | (tca40[1] << 16), (ulong)reg_base + 0x38);
#endif
}
#if defined(CONFIG_SPL_BUILD)
#if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN)
bool serror_need_skip = true;
void do_error(struct pt_regs *pt_regs, unsigned int esr)
{
/*
* If stack is still in ROM reserved OCRAM not switch to SPL,
* it is the ROM SError
*/
ulong sp;
asm volatile("mov %0, sp" : "=r"(sp) : );
if (serror_need_skip && sp < 0x910000 && sp >= 0x900000) {
/* Check for ERR050342, imx8mq HDCP enabled parts */
if (is_imx8mq() && !(readl(OCOTP_BASE_ADDR + 0x450) & 0x08000000)) {
serror_need_skip = false;
return; /* Do nothing skip the SError in ROM */
}
/* Check for ERR050350, field return mode for imx8mq, mm and mn */
if (readl(OCOTP_BASE_ADDR + 0x630) & 0x1) {
serror_need_skip = false;
return; /* Do nothing skip the SError in ROM */
}
}
efi_restore_gd();
printf("\"Error\" handler, esr 0x%08x\n", esr);
show_regs(pt_regs);
panic("Resetting CPU ...\n");
}
#endif
#endif
#if defined(CONFIG_IMX8MN) || defined(CONFIG_IMX8MP)
enum env_location env_get_location(enum env_operation op, int prio)
{
enum boot_device dev = get_boot_device();
enum env_location env_loc = ENVL_UNKNOWN;
if (prio)
return env_loc;
switch (dev) {
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
case QSPI_BOOT:
env_loc = ENVL_SPI_FLASH;
break;
#endif
#ifdef CONFIG_ENV_IS_IN_NAND
case NAND_BOOT:
env_loc = ENVL_NAND;
break;
#endif
#ifdef CONFIG_ENV_IS_IN_MMC
case SD1_BOOT:
case SD2_BOOT:
case SD3_BOOT:
case MMC1_BOOT:
case MMC2_BOOT:
case MMC3_BOOT:
env_loc = ENVL_MMC;
break;
#endif
default:
#if defined(CONFIG_ENV_IS_NOWHERE)
env_loc = ENVL_NOWHERE;
#endif
break;
}
return env_loc;
}
#ifndef ENV_IS_EMBEDDED
long long env_get_offset(long long defautl_offset)
{
enum boot_device dev = get_boot_device();
switch (dev) {
case NAND_BOOT:
return (60 << 20); /* 60MB offset for NAND */
default:
break;
}
return defautl_offset;
}
#endif
#endif