| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2008-2011 Freescale Semiconductor, Inc. |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #include <common.h> |
| #include <asm/bitops.h> |
| #include <asm/global_data.h> |
| #include <linux/compiler.h> |
| #include <asm/fsl_law.h> |
| #include <asm/io.h> |
| #include <linux/log2.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define FSL_HW_NUM_LAWS CONFIG_SYS_FSL_NUM_LAWS |
| |
| #ifdef CONFIG_FSL_CORENET |
| #define LAW_BASE (CONFIG_SYS_FSL_CORENET_CCM_ADDR) |
| #define LAWAR_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawar) |
| #define LAWBARH_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarh) |
| #define LAWBARL_ADDR(x) (&((ccsr_local_t *)LAW_BASE)->law[x].lawbarl) |
| #define LAWBAR_SHIFT 0 |
| #else |
| #define LAW_BASE (CONFIG_SYS_IMMR + 0xc08) |
| #define LAWAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x + 2) |
| #define LAWBAR_ADDR(x) ((u32 *)LAW_BASE + 8 * x) |
| #define LAWBAR_SHIFT 12 |
| #endif |
| |
| |
| static inline phys_addr_t get_law_base_addr(int idx) |
| { |
| #ifdef CONFIG_FSL_CORENET |
| return (phys_addr_t) |
| ((u64)in_be32(LAWBARH_ADDR(idx)) << 32) | |
| in_be32(LAWBARL_ADDR(idx)); |
| #else |
| return (phys_addr_t)in_be32(LAWBAR_ADDR(idx)) << LAWBAR_SHIFT; |
| #endif |
| } |
| |
| static inline void set_law_base_addr(int idx, phys_addr_t addr) |
| { |
| #ifdef CONFIG_FSL_CORENET |
| out_be32(LAWBARL_ADDR(idx), addr & 0xffffffff); |
| out_be32(LAWBARH_ADDR(idx), (u64)addr >> 32); |
| #else |
| out_be32(LAWBAR_ADDR(idx), addr >> LAWBAR_SHIFT); |
| #endif |
| } |
| |
| void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id) |
| { |
| gd->arch.used_laws |= (1 << idx); |
| |
| out_be32(LAWAR_ADDR(idx), 0); |
| set_law_base_addr(idx, addr); |
| out_be32(LAWAR_ADDR(idx), LAW_EN | ((u32)id << 20) | (u32)sz); |
| |
| /* Read back so that we sync the writes */ |
| in_be32(LAWAR_ADDR(idx)); |
| } |
| |
| void disable_law(u8 idx) |
| { |
| gd->arch.used_laws &= ~(1 << idx); |
| |
| out_be32(LAWAR_ADDR(idx), 0); |
| set_law_base_addr(idx, 0); |
| |
| /* Read back so that we sync the writes */ |
| in_be32(LAWAR_ADDR(idx)); |
| |
| return; |
| } |
| |
| #if !defined(CONFIG_NAND_SPL) && \ |
| (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) |
| static int get_law_entry(u8 i, struct law_entry *e) |
| { |
| u32 lawar; |
| |
| lawar = in_be32(LAWAR_ADDR(i)); |
| |
| if (!(lawar & LAW_EN)) |
| return 0; |
| |
| e->addr = get_law_base_addr(i); |
| e->size = lawar & 0x3f; |
| e->trgt_id = (lawar >> 20) & 0xff; |
| |
| return 1; |
| } |
| #endif |
| |
| int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) |
| { |
| u32 idx = ffz(gd->arch.used_laws); |
| |
| if (idx >= FSL_HW_NUM_LAWS) |
| return -1; |
| |
| set_law(idx, addr, sz, id); |
| |
| return idx; |
| } |
| |
| #if !defined(CONFIG_NAND_SPL) && \ |
| (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) |
| int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) |
| { |
| u32 idx; |
| |
| /* we have no LAWs free */ |
| if (gd->arch.used_laws == -1) |
| return -1; |
| |
| /* grab the last free law */ |
| idx = __ilog2(~(gd->arch.used_laws)); |
| |
| if (idx >= FSL_HW_NUM_LAWS) |
| return -1; |
| |
| set_law(idx, addr, sz, id); |
| |
| return idx; |
| } |
| |
| struct law_entry find_law(phys_addr_t addr) |
| { |
| struct law_entry entry; |
| int i; |
| |
| entry.index = -1; |
| entry.addr = 0; |
| entry.size = 0; |
| entry.trgt_id = 0; |
| |
| for (i = 0; i < FSL_HW_NUM_LAWS; i++) { |
| u64 upper; |
| |
| if (!get_law_entry(i, &entry)) |
| continue; |
| |
| upper = entry.addr + (2ull << entry.size); |
| if ((addr >= entry.addr) && (addr < upper)) { |
| entry.index = i; |
| break; |
| } |
| } |
| |
| return entry; |
| } |
| |
| void print_laws(void) |
| { |
| int i; |
| u32 lawar; |
| |
| printf("\nLocal Access Window Configuration\n"); |
| for (i = 0; i < FSL_HW_NUM_LAWS; i++) { |
| lawar = in_be32(LAWAR_ADDR(i)); |
| #ifdef CONFIG_FSL_CORENET |
| printf("LAWBARH%02d: 0x%08x LAWBARL%02d: 0x%08x", |
| i, in_be32(LAWBARH_ADDR(i)), |
| i, in_be32(LAWBARL_ADDR(i))); |
| #else |
| printf("LAWBAR%02d: 0x%08x", i, in_be32(LAWBAR_ADDR(i))); |
| #endif |
| printf(" LAWAR%02d: 0x%08x\n", i, lawar); |
| printf("\t(EN: %d TGT: 0x%02x SIZE: ", |
| (lawar & LAW_EN) ? 1 : 0, (lawar >> 20) & 0xff); |
| print_size(lawar_size(lawar), ")\n"); |
| } |
| |
| return; |
| } |
| |
| /* use up to 2 LAWs for DDR, used the last available LAWs */ |
| int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id) |
| { |
| u64 start_align, law_sz; |
| int law_sz_enc; |
| |
| if (start == 0) |
| start_align = 1ull << (LAW_SIZE_32G + 1); |
| else |
| start_align = 1ull << (__ffs64(start)); |
| law_sz = min(start_align, sz); |
| law_sz_enc = __ilog2_u64(law_sz) - 1; |
| |
| if (set_last_law(start, law_sz_enc, id) < 0) |
| return -1; |
| |
| /* recalculate size based on what was actually covered by the law */ |
| law_sz = 1ull << __ilog2_u64(law_sz); |
| |
| /* do we still have anything to map */ |
| sz = sz - law_sz; |
| if (sz) { |
| start += law_sz; |
| |
| start_align = 1ull << (__ffs64(start)); |
| law_sz = min(start_align, sz); |
| law_sz_enc = __ilog2_u64(law_sz) - 1; |
| |
| if (set_last_law(start, law_sz_enc, id) < 0) |
| return -1; |
| } else { |
| return 0; |
| } |
| |
| /* do we still have anything to map */ |
| sz = sz - law_sz; |
| if (sz) |
| return 1; |
| |
| return 0; |
| } |
| #endif /* not SPL */ |
| |
| void disable_non_ddr_laws(void) |
| { |
| int i; |
| int id; |
| for (i = 0; i < FSL_HW_NUM_LAWS; i++) { |
| u32 lawar = in_be32(LAWAR_ADDR(i)); |
| |
| if (lawar & LAW_EN) { |
| id = (lawar & ~LAW_EN) >> 20; |
| switch (id) { |
| case LAW_TRGT_IF_DDR_1: |
| case LAW_TRGT_IF_DDR_2: |
| case LAW_TRGT_IF_DDR_3: |
| case LAW_TRGT_IF_DDR_4: |
| case LAW_TRGT_IF_DDR_INTRLV: |
| case LAW_TRGT_IF_DDR_INTLV_34: |
| case LAW_TRGT_IF_DDR_INTLV_123: |
| case LAW_TRGT_IF_DDR_INTLV_1234: |
| continue; |
| default: |
| disable_law(i); |
| } |
| } |
| } |
| } |
| |
| void init_laws(void) |
| { |
| int i; |
| |
| #if FSL_HW_NUM_LAWS < 32 |
| gd->arch.used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1); |
| #elif FSL_HW_NUM_LAWS == 32 |
| gd->arch.used_laws = 0; |
| #else |
| #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes |
| #endif |
| |
| #if defined(CONFIG_NXP_ESBC) && defined(CONFIG_E500) && \ |
| !defined(CONFIG_E500MC) |
| /* ISBC (Boot ROM) creates a LAW 0 entry for non PBL platforms, |
| * which is not disabled before transferring the control to uboot. |
| * Disable the LAW 0 entry here. |
| */ |
| disable_law(0); |
| #endif |
| |
| #if !defined(CONFIG_NXP_ESBC) |
| /* |
| * if any non DDR LAWs has been created earlier, remove them before |
| * LAW table is parsed. |
| */ |
| disable_non_ddr_laws(); |
| #endif |
| |
| /* |
| * Any LAWs that were set up before we booted assume they are meant to |
| * be around and mark them used. |
| */ |
| for (i = 0; i < FSL_HW_NUM_LAWS; i++) { |
| u32 lawar = in_be32(LAWAR_ADDR(i)); |
| |
| if (lawar & LAW_EN) |
| gd->arch.used_laws |= (1 << i); |
| } |
| |
| for (i = 0; i < num_law_entries; i++) { |
| if (law_table[i].index == -1) |
| set_next_law(law_table[i].addr, law_table[i].size, |
| law_table[i].trgt_id); |
| else |
| set_law(law_table[i].index, law_table[i].addr, |
| law_table[i].size, law_table[i].trgt_id); |
| } |
| |
| #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| /* check RCW to get which port is used for boot */ |
| ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; |
| u32 bootloc = in_be32(&gur->rcwsr[6]); |
| /* |
| * in SRIO or PCIE boot we need to set specail LAWs for |
| * SRIO or PCIE interfaces. |
| */ |
| switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) { |
| case 0x0: /* boot from PCIE1 */ |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_1); |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_1); |
| break; |
| case 0x1: /* boot from PCIE2 */ |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_2); |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_2); |
| break; |
| case 0x2: /* boot from PCIE3 */ |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_3); |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_PCIE_3); |
| break; |
| case 0x8: /* boot from SRIO1 */ |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_RIO_1); |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_RIO_1); |
| break; |
| case 0x9: /* boot from SRIO2 */ |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_RIO_2); |
| set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, |
| LAW_SIZE_1M, |
| LAW_TRGT_IF_RIO_2); |
| break; |
| default: |
| break; |
| } |
| #endif |
| |
| return ; |
| } |