| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2010-2017 CS Systemes d'Information |
| * Florent Trinh Thai <florent.trinh-thai@c-s.fr> |
| * Christophe Leroy <christophe.leroy@c-s.fr> |
| * |
| * Board specific routines for the MCR3000 board |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <hwconfig.h> |
| #include <init.h> |
| #include <mpc8xx.h> |
| #include <fdt_support.h> |
| #include <serial.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <dm/uclass.h> |
| #include <wdt.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define SDRAM_MAX_SIZE (32 * 1024 * 1024) |
| |
| static const uint cs1_dram_table_66[] = { |
| /* DRAM - single read. (offset 0 in upm RAM) */ |
| 0x0F3DFC04, 0x0FEFBC04, 0x00BE7804, 0x0FFDF400, |
| 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| |
| /* DRAM - burst read. (offset 8 in upm RAM) */ |
| 0x0F3DFC04, 0x0FEFBC04, 0x00BF7C04, 0x00FFFC00, |
| 0x00FFFC00, 0x00FEF800, 0x0FFDF400, 0x1FFFFC05, |
| 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| |
| /* DRAM - single write. (offset 18 in upm RAM) */ |
| 0x0F3DFC04, 0x0FEFB800, 0x00BF7404, 0x0FFEF804, |
| 0x0FFDF404, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, |
| |
| /* DRAM - burst write. (offset 20 in upm RAM) */ |
| 0x0F3DFC04, 0x0FEFB800, 0x00BF7400, 0x00FFFC00, |
| 0x00FFFC00, 0x00FFFC04, 0x0FFEF804, 0x0FFDF404, |
| 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| |
| /* refresh (offset 30 in upm RAM) */ |
| 0x0FFDF404, 0x0FFEBC04, 0x0FFD7C84, 0x0FFFFC04, |
| 0x0FFFFC04, 0x0FFFFC04, 0x1FFFFC85, 0xFFFFFFFF, |
| |
| /* init */ |
| 0x0FEEB874, 0x0FBD7474, 0x1FFFFC45, 0xFFFFFFFF, |
| |
| /* exception. (offset 3c in upm RAM) */ |
| 0xFFFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, |
| }; |
| |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| const char *sync = "receive"; |
| |
| ft_cpu_setup(blob, bd); |
| |
| /* BRG */ |
| do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency", |
| bd->bi_busfreq, 1); |
| |
| /* MAC addr */ |
| fdt_fixup_ethernet(blob); |
| |
| /* Bus Frequency for CPM */ |
| do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1); |
| |
| /* E1 interface - Set data rate */ |
| do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1); |
| |
| /* E1 interface - Set channel phase to 0 */ |
| do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1); |
| |
| /* E1 interface - rising edge sync pulse transmit */ |
| do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse", |
| sync, strlen(sync), 1); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| serial_puts("BOARD: MCR3000 CSSI\n"); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR; |
| memctl8xx_t __iomem *memctl = &immap->im_memctl; |
| |
| printf("UPMA init for SDRAM (CAS latency 2), "); |
| printf("init address 0x%08x, size ", (int)dram_init); |
| /* Configure UPMA for cs1 */ |
| upmconfig(UPMA, (uint *)cs1_dram_table_66, |
| sizeof(cs1_dram_table_66) / sizeof(uint)); |
| udelay(10); |
| out_be16(&memctl->memc_mptpr, 0x0200); |
| out_be32(&memctl->memc_mamr, 0x14904000); |
| udelay(10); |
| out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_PRELIM); |
| out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_PRELIM); |
| udelay(10); |
| out_be32(&memctl->memc_mcr, 0x80002830); |
| out_be32(&memctl->memc_mar, 0x00000088); |
| out_be32(&memctl->memc_mcr, 0x80002038); |
| udelay(200); |
| |
| gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, |
| SDRAM_MAX_SIZE); |
| |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; |
| iop8xx_t __iomem *iop = &immr->im_ioport; |
| |
| /* Set port C13 as GPIO (BTN_ACQ_AL) */ |
| clrbits_be16(&iop->iop_pcpar, 0x4); |
| clrbits_be16(&iop->iop_pcdir, 0x4); |
| |
| /* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */ |
| if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0) |
| env_set("bootdelay", "60"); |
| |
| return 0; |
| } |
| |
| int board_early_init_f(void) |
| { |
| immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; |
| |
| /* |
| * Erase FPGA(s) for reboot |
| */ |
| clrbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA down */ |
| setbits_be32(&immr->im_cpm.cp_pbdir, 0x00020000); /* PROGFPGA output */ |
| udelay(1); /* Wait more than 300ns */ |
| setbits_be32(&immr->im_cpm.cp_pbdat, 0x00020000); /* PROGFPGA up */ |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| struct udevice *watchdog_dev = NULL; |
| |
| if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) { |
| puts("Cannot find watchdog!\n"); |
| } else { |
| puts("Enabling watchdog.\n"); |
| wdt_start(watchdog_dev, 0xffff, 0); |
| } |
| |
| return 0; |
| } |