blob: 2770e104ee611bba7fb1bc87d57d34dd226546be [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
#include <common.h>
#include <command.h>
#include <env.h>
#include <fdt_support.h>
#include <i2c.h>
#include <image.h>
#include <init.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "t102xrdb.h"
#ifdef CONFIG_TARGET_T1024RDB
#include "cpld.h"
#elif defined(CONFIG_TARGET_T1023RDB)
#include <i2c.h>
#include <mmc.h>
#endif
#include "../common/sleep.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_TARGET_T1023RDB
enum {
GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */
GPIO1_EMMC_SEL,
GPIO3_GET_VERSION, /* GPIO3_4/5, 00:RevB, 01: RevC */
GPIO3_BRD_VER_MASK = 0x0c000000,
GPIO3_OFFSET = 0x2000,
I2C_GET_BANK,
I2C_SET_BANK0,
I2C_SET_BANK4,
};
#endif
int checkboard(void)
{
struct cpu_type *cpu = gd->arch.cpu;
static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
printf("Board: %sRDB, ", cpu->name);
#if defined(CONFIG_TARGET_T1024RDB)
printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
CPLD_READ(hw_ver), CPLD_READ(sw_ver));
#elif defined(CONFIG_TARGET_T1023RDB)
printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B');
#endif
printf("boot from ");
#ifdef CONFIG_SDCARD
puts("SD/MMC\n");
#elif CONFIG_SPIFLASH
puts("SPI\n");
#elif defined(CONFIG_TARGET_T1024RDB)
u8 reg;
reg = CPLD_READ(flash_csr);
if (reg & CPLD_BOOT_SEL) {
puts("NAND\n");
} else {
reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
printf("NOR vBank%d\n", reg);
}
#elif defined(CONFIG_TARGET_T1023RDB)
#ifdef CONFIG_MTD_RAW_NAND
puts("NAND\n");
#else
printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK));
#endif
#endif
puts("SERDES Reference Clocks:\n");
if (srds_s1 == 0x95)
printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
else
printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[1]);
return 0;
}
#ifdef CONFIG_TARGET_T1024RDB
static void board_mux_lane(void)
{
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 srds_prtcl_s1;
u8 reg = CPLD_READ(misc_ctl_status);
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
if (srds_prtcl_s1 == 0x95) {
/* Route Lane B to PCIE */
CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX);
} else {
/* Route Lane B to SGMII */
CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX);
}
CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
}
#endif
int board_early_init_f(void)
{
#if defined(CONFIG_DEEP_SLEEP)
if (is_warm_boot())
fsl_dp_disable_console();
#endif
return 0;
}
int board_early_init_r(void)
{
#ifdef CONFIG_SYS_FLASH_BASE
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
#endif
#ifdef CONFIG_TARGET_T1024RDB
board_mux_lane();
#endif
return 0;
}
unsigned long get_board_sys_clk(void)
{
return CONFIG_SYS_CLK_FREQ;
}
unsigned long get_board_ddr_clk(void)
{
return CONFIG_DDR_CLK_FREQ;
}
#ifdef CONFIG_TARGET_T1024RDB
void board_reset(void)
{
CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
}
#endif
int misc_init_r(void)
{
return 0;
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
fsl_fdt_fixup_dr_usb(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
fdt_fixup_board_enet(blob);
#endif
#ifdef CONFIG_TARGET_T1023RDB
if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0)
fdt_enable_nor(blob);
#endif
return 0;
}
#ifdef CONFIG_TARGET_T1023RDB
/* Enable NOR flash for RevC */
static void fdt_enable_nor(void *blob)
{
int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash");
if (nodeoff >= 0)
fdt_status_okay(blob, nodeoff);
else
printf("WARNING unable to set status for NOR\n");
}
int board_mmc_getcd(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
/* GPIO1_14, 0: eMMC, 1: SD/MMC */
val &= GPIO1_SD_SEL;
return val ? -1 : 1;
}
int board_mmc_getwp(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
val &= GPIO1_SD_SEL;
return val ? -1 : 0;
}
static u32 t1023rdb_ctrl(u32 ctrl_type)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 val;
u8 tmp;
int bus_num = I2C_PCA6408_BUS_NUM;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA6408_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
switch (ctrl_type) {
case GPIO1_SD_SEL:
val = in_be32(&pgpio->gpdat);
val |= GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO1_EMMC_SEL:
val = in_be32(&pgpio->gpdat);
val &= ~GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO3_GET_VERSION:
pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+ GPIO3_OFFSET);
val = in_be32(&pgpio->gpdat);
val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
if (val == 0x3) /* GPIO3_4/5 not used on RevB */
val = 0;
return val;
case I2C_GET_BANK:
dm_i2c_read(dev, 0, &tmp, 1);
tmp &= 0x7;
tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
return tmp;
case I2C_SET_BANK0:
tmp = 0x0;
dm_i2c_write(dev, 1, &tmp, 1);
tmp = 0xf8;
dm_i2c_write(dev, 3, &tmp, 1);
/* asserting HRESET_REQ */
out_be32(&gur->rstcr, 0x2);
break;
case I2C_SET_BANK4:
tmp = 0x1;
dm_i2c_write(dev, 1, &tmp, 1);
tmp = 0xf8;
dm_i2c_write(dev, 3, &tmp, 1);
out_be32(&gur->rstcr, 0x2);
break;
default:
break;
}
#else
u32 orig_bus;
orig_bus = i2c_get_bus_num();
switch (ctrl_type) {
case GPIO1_SD_SEL:
val = in_be32(&pgpio->gpdat);
val |= GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO1_EMMC_SEL:
val = in_be32(&pgpio->gpdat);
val &= ~GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO3_GET_VERSION:
pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+ GPIO3_OFFSET);
val = in_be32(&pgpio->gpdat);
val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
if (val == 0x3) /* GPIO3_4/5 not used on RevB */
val = 0;
return val;
case I2C_GET_BANK:
i2c_set_bus_num(bus_num);
i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1);
tmp &= 0x7;
tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
i2c_set_bus_num(orig_bus);
return tmp;
case I2C_SET_BANK0:
i2c_set_bus_num(bus_num);
tmp = 0x0;
i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
tmp = 0xf8;
i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
/* asserting HRESET_REQ */
out_be32(&gur->rstcr, 0x2);
break;
case I2C_SET_BANK4:
i2c_set_bus_num(bus_num);
tmp = 0x1;
i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
tmp = 0xf8;
i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
out_be32(&gur->rstcr, 0x2);
break;
default:
break;
}
#endif
return 0;
}
static int switch_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
if (!strcmp(argv[1], "bank0"))
t1023rdb_ctrl(I2C_SET_BANK0);
else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank"))
t1023rdb_ctrl(I2C_SET_BANK4);
else if (!strcmp(argv[1], "sd"))
t1023rdb_ctrl(GPIO1_SD_SEL);
else if (!strcmp(argv[1], "emmc"))
t1023rdb_ctrl(GPIO1_EMMC_SEL);
else
return CMD_RET_USAGE;
return 0;
}
U_BOOT_CMD(
switch, 2, 0, switch_cmd,
"for bank0/bank4/sd/emmc switch control in runtime",
"command (e.g. switch bank4)"
);
#endif