| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Code shared between SPL and U-Boot proper |
| * |
| * Copyright (c) 2015 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <bootstage.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Unfortunately x86 or ARM can't compile this code as gd cannot be assigned */ |
| #if !defined(CONFIG_X86) && !defined(CONFIG_ARM) |
| __weak void arch_setup_gd(struct global_data *gd_ptr) |
| { |
| gd = gd_ptr; |
| } |
| #endif /* !CONFIG_X86 && !CONFIG_ARM */ |
| |
| /** |
| * This function is called from board_init_f_init_reserve to set up |
| * gd->start_addr_sp for stack protection if not already set otherwise |
| */ |
| __weak void board_init_f_init_stack_protection_addr(ulong base) |
| { |
| #if CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE) |
| /* set up stack pointer for stack usage if not set yet */ |
| if (!gd->start_addr_sp) |
| gd->start_addr_sp = base; |
| #endif |
| } |
| |
| /** |
| * This function is called after the position of the initial stack is |
| * determined in gd->start_addr_sp. Boards can override it to set up |
| * stack-checking markers. |
| */ |
| __weak void board_init_f_init_stack_protection(void) |
| { |
| #if CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE) |
| ulong stack_bottom = gd->start_addr_sp - |
| CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK); |
| |
| /* substact some safety margin (0x20) since stack is in use here */ |
| memset((void *)stack_bottom, CONFIG_VAL(SYS_STACK_F_CHECK_BYTE), |
| CONFIG_VAL(SIZE_LIMIT_PROVIDE_STACK) - 0x20); |
| #endif |
| } |
| |
| /* |
| * Allocate reserved space for use as 'globals' from 'top' address and |
| * return 'bottom' address of allocated space |
| * |
| * Notes: |
| * |
| * Actual reservation cannot be done from within this function as |
| * it requires altering the C stack pointer, so this will be done by |
| * the caller upon return from this function. |
| * |
| * IMPORTANT: |
| * |
| * Alignment constraints may differ for each 'chunk' allocated. For now: |
| * |
| * - GD is aligned down on a 16-byte boundary |
| * |
| * - the early malloc arena is not aligned, therefore it follows the stack |
| * alignment constraint of the architecture for which we are bulding. |
| * |
| * - GD is allocated last, so that the return value of this functions is |
| * both the bottom of the reserved area and the address of GD, should |
| * the calling context need it. |
| */ |
| |
| ulong board_init_f_alloc_reserve(ulong top) |
| { |
| /* Reserve early malloc arena */ |
| #if CONFIG_VAL(SYS_MALLOC_F_LEN) |
| top -= CONFIG_VAL(SYS_MALLOC_F_LEN); |
| #endif |
| /* LAST : reserve GD (rounded up to a multiple of 16 bytes) */ |
| top = rounddown(top-sizeof(struct global_data), 16); |
| |
| return top; |
| } |
| |
| /* |
| * Initialize reserved space (which has been safely allocated on the C |
| * stack from the C runtime environment handling code). |
| * |
| * Notes: |
| * |
| * Actual reservation was done by the caller; the locations from base |
| * to base+size-1 (where 'size' is the value returned by the allocation |
| * function above) can be accessed freely without risk of corrupting the |
| * C runtime environment. |
| * |
| * IMPORTANT: |
| * |
| * Upon return from the allocation function above, on some architectures |
| * the caller will set gd to the lowest reserved location. Therefore, in |
| * this initialization function, the global data MUST be placed at base. |
| * |
| * ALSO IMPORTANT: |
| * |
| * On some architectures, gd will already be good when entering this |
| * function. On others, it will only be good once arch_setup_gd() returns. |
| * Therefore, global data accesses must be done: |
| * |
| * - through gd_ptr if before the call to arch_setup_gd(); |
| * |
| * - through gd once arch_setup_gd() has been called. |
| * |
| * Do not use 'gd->' until arch_setup_gd() has been called! |
| * |
| * IMPORTANT TOO: |
| * |
| * Initialization for each "chunk" (GD, early malloc arena...) ends with |
| * an incrementation line of the form 'base += <some size>'. The last of |
| * these incrementations seems useless, as base will not be used any |
| * more after this incrementation; but if/when a new "chunk" is appended, |
| * this increment will be essential as it will give base right value for |
| * this new chunk (which will have to end with its own incrementation |
| * statement). Besides, the compiler's optimizer will silently detect |
| * and remove the last base incrementation, therefore leaving that last |
| * (seemingly useless) incrementation causes no code increase. |
| */ |
| |
| void board_init_f_init_reserve(ulong base) |
| { |
| struct global_data *gd_ptr; |
| |
| /* |
| * clear GD entirely and set it up. |
| * Use gd_ptr, as gd may not be properly set yet. |
| */ |
| |
| gd_ptr = (struct global_data *)base; |
| /* zero the area */ |
| memset(gd_ptr, '\0', sizeof(*gd)); |
| /* set GD unless architecture did it already */ |
| #if !defined(CONFIG_ARM) |
| arch_setup_gd(gd_ptr); |
| #endif |
| |
| if (CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE)) |
| board_init_f_init_stack_protection_addr(base); |
| |
| /* next alloc will be higher by one GD plus 16-byte alignment */ |
| base += roundup(sizeof(struct global_data), 16); |
| |
| /* |
| * record early malloc arena start. |
| * Use gd as it is now properly set for all architectures. |
| */ |
| |
| #if CONFIG_VAL(SYS_MALLOC_F_LEN) |
| /* go down one 'early malloc arena' */ |
| gd->malloc_base = base; |
| #endif |
| |
| if (CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE)) |
| board_init_f_init_stack_protection(); |
| } |
| |
| /* |
| * Board-specific Platform code can reimplement show_boot_progress () if needed |
| */ |
| __weak void show_boot_progress(int val) {} |