blob: cc34b8aee4c484c123d6770d778331b9c8b6e880 [file] [log] [blame]
/*
* Common LCD routines for supported CPUs
*
* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering -- wd@denx.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
/************************************************************************/
/* ** HEADER FILES */
/************************************************************************/
/* #define DEBUG */
#include <config.h>
#include <common.h>
#include <command.h>
#include <stdarg.h>
#include <search.h>
#include <env_callback.h>
#include <linux/types.h>
#include <stdio_dev.h>
#if defined(CONFIG_POST)
#include <post.h>
#endif
#include <lcd.h>
#include <watchdog.h>
#include <asm/unaligned.h>
#include <splash.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#include <fdt_support.h>
#if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
defined(CONFIG_CPU_MONAHANS)
#include <asm/byteorder.h>
#endif
#if defined(CONFIG_MPC823)
#include <lcdvideo.h>
#endif
#if defined(CONFIG_ATMEL_LCD)
#include <atmel_lcdc.h>
#endif
#if defined(CONFIG_LCD_DT_SIMPLEFB)
#include <libfdt.h>
#endif
/************************************************************************/
/* ** FONT DATA */
/************************************************************************/
#include <video_font.h> /* Get font data, width and height */
/************************************************************************/
/* ** LOGO DATA */
/************************************************************************/
#ifdef CONFIG_LCD_LOGO
# include <bmp_logo.h> /* Get logo data, width and height */
# include <bmp_logo_data.h>
# if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET) && (LCD_BPP != LCD_COLOR16)
# error Default Color Map overlaps with Logo Color Map
# endif
#endif
#ifdef CONFIG_SANDBOX
#include <asm/sdl.h>
#endif
#ifndef CONFIG_LCD_ALIGNMENT
#define CONFIG_LCD_ALIGNMENT PAGE_SIZE
#endif
#if (LCD_BPP != LCD_COLOR8) && (LCD_BPP != LCD_COLOR16) && \
(LCD_BPP != LCD_COLOR32)
# error Unsupported LCD BPP.
#endif
DECLARE_GLOBAL_DATA_PTR;
static int lcd_init(void *lcdbase);
static void *lcd_logo(void);
static void lcd_setfgcolor(int color);
static void lcd_setbgcolor(int color);
static int lcd_color_fg;
static int lcd_color_bg;
int lcd_line_length;
char lcd_is_enabled = 0;
static void *lcd_base; /* Start of framebuffer memory */
static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */
/************************************************************************/
/* Flush LCD activity to the caches */
void lcd_sync(void)
{
/*
* flush_dcache_range() is declared in common.h but it seems that some
* architectures do not actually implement it. Is there a way to find
* out whether it exists? For now, ARM is safe.
*/
#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_DCACHE_OFF)
int line_length;
if (lcd_flush_dcache)
flush_dcache_range((u32)lcd_base,
(u32)(lcd_base + lcd_get_size(&line_length)));
#elif defined(CONFIG_SANDBOX) && defined(CONFIG_VIDEO_SANDBOX_SDL)
static ulong last_sync;
if (get_timer(last_sync) > 10) {
sandbox_sdl_sync(lcd_base);
last_sync = get_timer(0);
}
#endif
}
void lcd_set_flush_dcache(int flush)
{
lcd_flush_dcache = (flush != 0);
}
/*----------------------------------------------------------------------*/
static void lcd_stub_putc(struct stdio_dev *dev, const char c)
{
lcd_putc(c);
}
static void lcd_stub_puts(struct stdio_dev *dev, const char *s)
{
lcd_puts(s);
}
/************************************************************************/
/** Small utility to check that you got the colours right */
/************************************************************************/
#ifdef LCD_TEST_PATTERN
#define N_BLK_VERT 2
#define N_BLK_HOR 3
static int test_colors[N_BLK_HOR * N_BLK_VERT] = {
CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW,
CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN,
};
static void test_pattern(void)
{
ushort v_max = panel_info.vl_row;
ushort h_max = panel_info.vl_col;
ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT;
ushort h_step = (h_max + N_BLK_HOR - 1) / N_BLK_HOR;
ushort v, h;
uchar *pix = (uchar *)lcd_base;
printf("[LCD] Test Pattern: %d x %d [%d x %d]\n",
h_max, v_max, h_step, v_step);
/* WARNING: Code silently assumes 8bit/pixel */
for (v = 0; v < v_max; ++v) {
uchar iy = v / v_step;
for (h = 0; h < h_max; ++h) {
uchar ix = N_BLK_HOR * iy + h / h_step;
*pix++ = test_colors[ix];
}
}
}
#endif /* LCD_TEST_PATTERN */
/************************************************************************/
/* ** GENERIC Initialization Routines */
/************************************************************************/
/*
* With most lcd drivers the line length is set up
* by calculating it from panel_info parameters. Some
* drivers need to calculate the line length differently,
* so make the function weak to allow overriding it.
*/
__weak int lcd_get_size(int *line_length)
{
*line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
return *line_length * panel_info.vl_row;
}
int drv_lcd_init(void)
{
struct stdio_dev lcddev;
int rc;
lcd_base = map_sysmem(gd->fb_base, 0);
lcd_init(lcd_base); /* LCD initialization */
/* Device initialization */
memset(&lcddev, 0, sizeof(lcddev));
strcpy(lcddev.name, "lcd");
lcddev.ext = 0; /* No extensions */
lcddev.flags = DEV_FLAGS_OUTPUT; /* Output only */
lcddev.putc = lcd_stub_putc; /* 'putc' function */
lcddev.puts = lcd_stub_puts; /* 'puts' function */
rc = stdio_register(&lcddev);
return (rc == 0) ? 1 : rc;
}
/*----------------------------------------------------------------------*/
void lcd_clear(void)
{
short console_rows, console_cols;
int bg_color;
#if LCD_BPP == LCD_COLOR8
/* Setting the palette */
lcd_setcolreg(CONSOLE_COLOR_BLACK, 0, 0, 0);
lcd_setcolreg(CONSOLE_COLOR_RED, 0xFF, 0, 0);
lcd_setcolreg(CONSOLE_COLOR_GREEN, 0, 0xFF, 0);
lcd_setcolreg(CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0);
lcd_setcolreg(CONSOLE_COLOR_BLUE, 0, 0, 0xFF);
lcd_setcolreg(CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF);
lcd_setcolreg(CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF);
lcd_setcolreg(CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA);
lcd_setcolreg(CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF);
#endif
#ifndef CONFIG_SYS_WHITE_ON_BLACK
lcd_setfgcolor(CONSOLE_COLOR_BLACK);
lcd_setbgcolor(CONSOLE_COLOR_WHITE);
bg_color = CONSOLE_COLOR_WHITE;
#else
lcd_setfgcolor(CONSOLE_COLOR_WHITE);
lcd_setbgcolor(CONSOLE_COLOR_BLACK);
bg_color = CONSOLE_COLOR_BLACK;
#endif /* CONFIG_SYS_WHITE_ON_BLACK */
#ifdef LCD_TEST_PATTERN
test_pattern();
#else
/* set framebuffer to background color */
#if (LCD_BPP != LCD_COLOR32)
memset((char *)lcd_base, bg_color, lcd_line_length * panel_info.vl_row);
#else
u32 *ppix = lcd_base;
u32 i;
for (i = 0;
i < (lcd_line_length * panel_info.vl_row)/NBYTES(panel_info.vl_bpix);
i++) {
*ppix++ = bg_color;
}
#endif
#endif
/* Paint the logo and retrieve LCD base address */
debug("[LCD] Drawing the logo...\n");
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
console_rows = (panel_info.vl_row - BMP_LOGO_HEIGHT);
console_rows /= VIDEO_FONT_HEIGHT;
#else
console_rows = panel_info.vl_row / VIDEO_FONT_HEIGHT;
#endif
console_cols = panel_info.vl_col / VIDEO_FONT_WIDTH;
lcd_init_console(lcd_logo(), console_rows, console_cols);
lcd_sync();
}
static int do_lcd_clear(cmd_tbl_t *cmdtp, int flag, int argc,
char *const argv[])
{
lcd_clear();
return 0;
}
U_BOOT_CMD(
cls, 1, 1, do_lcd_clear,
"clear screen",
""
);
/*----------------------------------------------------------------------*/
static int lcd_init(void *lcdbase)
{
/* Initialize the lcd controller */
debug("[LCD] Initializing LCD frambuffer at %p\n", lcdbase);
lcd_ctrl_init(lcdbase);
/*
* lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi) ignores
* the 'lcdbase' argument and uses custom lcd base address
* by setting up gd->fb_base. Check for this condition and fixup
* 'lcd_base' address.
*/
if (map_to_sysmem(lcdbase) != gd->fb_base)
lcd_base = map_sysmem(gd->fb_base, 0);
debug("[LCD] Using LCD frambuffer at %p\n", lcd_base);
lcd_get_size(&lcd_line_length);
lcd_is_enabled = 1;
lcd_clear();
lcd_enable();
/* Initialize the console */
lcd_set_col(0);
#ifdef CONFIG_LCD_INFO_BELOW_LOGO
lcd_set_row(7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT);
#else
lcd_set_row(1); /* leave 1 blank line below logo */
#endif
return 0;
}
/************************************************************************/
/* ** ROM capable initialization part - needed to reserve FB memory */
/************************************************************************/
/*
* This is called early in the system initialization to grab memory
* for the LCD controller.
* Returns new address for monitor, after reserving LCD buffer memory
*
* Note that this is running from ROM, so no write access to global data.
*/
ulong lcd_setmem(ulong addr)
{
ulong size;
int line_length;
debug("LCD panel info: %d x %d, %d bit/pix\n", panel_info.vl_col,
panel_info.vl_row, NBITS(panel_info.vl_bpix));
size = lcd_get_size(&line_length);
/* Round up to nearest full page, or MMU section if defined */
size = ALIGN(size, CONFIG_LCD_ALIGNMENT);
addr = ALIGN(addr - CONFIG_LCD_ALIGNMENT + 1, CONFIG_LCD_ALIGNMENT);
/* Allocate pages for the frame buffer. */
addr -= size;
debug("Reserving %ldk for LCD Framebuffer at: %08lx\n",
size >> 10, addr);
return addr;
}
/*----------------------------------------------------------------------*/
static void lcd_setfgcolor(int color)
{
lcd_color_fg = color;
}
int lcd_getfgcolor(void)
{
return lcd_color_fg;
}
/*----------------------------------------------------------------------*/
static void lcd_setbgcolor(int color)
{
lcd_color_bg = color;
}
int lcd_getbgcolor(void)
{
return lcd_color_bg;
}
/************************************************************************/
/* ** Chipset depending Bitmap / Logo stuff... */
/************************************************************************/
static inline ushort *configuration_get_cmap(void)
{
#if defined CONFIG_CPU_PXA
struct pxafb_info *fbi = &panel_info.pxa;
return (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
cpm8xx_t *cp = &(immr->im_cpm);
return (ushort *)&(cp->lcd_cmap[255 * sizeof(ushort)]);
#elif defined(CONFIG_ATMEL_LCD)
return (ushort *)(panel_info.mmio + ATMEL_LCDC_LUT(0));
#elif !defined(CONFIG_ATMEL_HLCD) && !defined(CONFIG_EXYNOS_FB)
return panel_info.cmap;
#elif defined(CONFIG_LCD_LOGO)
return bmp_logo_palette;
#else
return NULL;
#endif
}
#ifdef CONFIG_LCD_LOGO
void bitmap_plot(int x, int y)
{
#ifdef CONFIG_ATMEL_LCD
uint *cmap = (uint *)bmp_logo_palette;
#else
ushort *cmap = (ushort *)bmp_logo_palette;
#endif
ushort i, j;
uchar *bmap;
uchar *fb;
ushort *fb16;
#if defined(CONFIG_MPC823)
immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
cpm8xx_t *cp = &(immr->im_cpm);
#endif
unsigned bpix = NBITS(panel_info.vl_bpix);
debug("Logo: width %d height %d colors %d cmap %d\n",
BMP_LOGO_WIDTH, BMP_LOGO_HEIGHT, BMP_LOGO_COLORS,
ARRAY_SIZE(bmp_logo_palette));
bmap = &bmp_logo_bitmap[0];
fb = (uchar *)(lcd_base + y * lcd_line_length + x * bpix / 8);
if (bpix < 12) {
/* Leave room for default color map
* default case: generic system with no cmap (most likely 16bpp)
* cmap was set to the source palette, so no change is done.
* This avoids even more ifdefs in the next stanza
*/
#if defined(CONFIG_MPC823)
cmap = (ushort *) &(cp->lcd_cmap[BMP_LOGO_OFFSET * sizeof(ushort)]);
#elif defined(CONFIG_ATMEL_LCD)
cmap = (uint *)configuration_get_cmap();
#else
cmap = configuration_get_cmap();
#endif
WATCHDOG_RESET();
/* Set color map */
for (i = 0; i < ARRAY_SIZE(bmp_logo_palette); ++i) {
ushort colreg = bmp_logo_palette[i];
#ifdef CONFIG_ATMEL_LCD
uint lut_entry;
#ifdef CONFIG_ATMEL_LCD_BGR555
lut_entry = ((colreg & 0x000F) << 11) |
((colreg & 0x00F0) << 2) |
((colreg & 0x0F00) >> 7);
#else /* CONFIG_ATMEL_LCD_RGB565 */
lut_entry = ((colreg & 0x000F) << 1) |
((colreg & 0x00F0) << 3) |
((colreg & 0x0F00) << 4);
#endif
*(cmap + BMP_LOGO_OFFSET) = lut_entry;
cmap++;
#else /* !CONFIG_ATMEL_LCD */
*cmap++ = colreg;
#endif /* CONFIG_ATMEL_LCD */
}
WATCHDOG_RESET();
for (i = 0; i < BMP_LOGO_HEIGHT; ++i) {
memcpy(fb, bmap, BMP_LOGO_WIDTH);
bmap += BMP_LOGO_WIDTH;
fb += panel_info.vl_col;
}
}
else { /* true color mode */
u16 col16;
fb16 = (ushort *)fb;
for (i = 0; i < BMP_LOGO_HEIGHT; ++i) {
for (j = 0; j < BMP_LOGO_WIDTH; j++) {
col16 = bmp_logo_palette[(bmap[j]-16)];
fb16[j] =
((col16 & 0x000F) << 1) |
((col16 & 0x00F0) << 3) |
((col16 & 0x0F00) << 4);
}
bmap += BMP_LOGO_WIDTH;
fb16 += panel_info.vl_col;
}
}
WATCHDOG_RESET();
lcd_sync();
}
#else
static inline void bitmap_plot(int x, int y) {}
#endif /* CONFIG_LCD_LOGO */
/*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
/*
* Display the BMP file located at address bmp_image.
* Only uncompressed.
*/
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
#define BMP_ALIGN_CENTER 0x7FFF
static void splash_align_axis(int *axis, unsigned long panel_size,
unsigned long picture_size)
{
unsigned long panel_picture_delta = panel_size - picture_size;
unsigned long axis_alignment;
if (*axis == BMP_ALIGN_CENTER)
axis_alignment = panel_picture_delta / 2;
else if (*axis < 0)
axis_alignment = panel_picture_delta + *axis + 1;
else
return;
*axis = max(0, (int)axis_alignment);
}
#endif
#ifdef CONFIG_LCD_BMP_RLE8
#define BMP_RLE8_ESCAPE 0
#define BMP_RLE8_EOL 0
#define BMP_RLE8_EOBMP 1
#define BMP_RLE8_DELTA 2
static void draw_unencoded_bitmap(ushort **fbp, uchar *bmap, ushort *cmap,
int cnt)
{
while (cnt > 0) {
*(*fbp)++ = cmap[*bmap++];
cnt--;
}
}
static void draw_encoded_bitmap(ushort **fbp, ushort c, int cnt)
{
ushort *fb = *fbp;
int cnt_8copy = cnt >> 3;
cnt -= cnt_8copy << 3;
while (cnt_8copy > 0) {
*fb++ = c;
*fb++ = c;
*fb++ = c;
*fb++ = c;
*fb++ = c;
*fb++ = c;
*fb++ = c;
*fb++ = c;
cnt_8copy--;
}
while (cnt > 0) {
*fb++ = c;
cnt--;
}
*fbp = fb;
}
/*
* Do not call this function directly, must be called from lcd_display_bitmap.
*/
static void lcd_display_rle8_bitmap(bmp_image_t *bmp, ushort *cmap, uchar *fb,
int x_off, int y_off)
{
uchar *bmap;
ulong width, height;
ulong cnt, runlen;
int x, y;
int decode = 1;
width = get_unaligned_le32(&bmp->header.width);
height = get_unaligned_le32(&bmp->header.height);
bmap = (uchar *)bmp + get_unaligned_le32(&bmp->header.data_offset);
x = 0;
y = height - 1;
while (decode) {
if (bmap[0] == BMP_RLE8_ESCAPE) {
switch (bmap[1]) {
case BMP_RLE8_EOL:
/* end of line */
bmap += 2;
x = 0;
y--;
/* 16bpix, 2-byte per pixel, width should *2 */
fb -= (width * 2 + lcd_line_length);
break;
case BMP_RLE8_EOBMP:
/* end of bitmap */
decode = 0;
break;
case BMP_RLE8_DELTA:
/* delta run */
x += bmap[2];
y -= bmap[3];
/* 16bpix, 2-byte per pixel, x should *2 */
fb = (uchar *) (lcd_base + (y + y_off - 1)
* lcd_line_length + (x + x_off) * 2);
bmap += 4;
break;
default:
/* unencoded run */
runlen = bmap[1];
bmap += 2;
if (y < height) {
if (x < width) {
if (x + runlen > width)
cnt = width - x;
else
cnt = runlen;
draw_unencoded_bitmap(
(ushort **)&fb,
bmap, cmap, cnt);
}
x += runlen;
}
bmap += runlen;
if (runlen & 1)
bmap++;
}
} else {
/* encoded run */
if (y < height) {
runlen = bmap[0];
if (x < width) {
/* aggregate the same code */
while (bmap[0] == 0xff &&
bmap[2] != BMP_RLE8_ESCAPE &&
bmap[1] == bmap[3]) {
runlen += bmap[2];
bmap += 2;
}
if (x + runlen > width)
cnt = width - x;
else
cnt = runlen;
draw_encoded_bitmap((ushort **)&fb,
cmap[bmap[1]], cnt);
}
x += runlen;
}
bmap += 2;
}
}
}
#endif
#if defined(CONFIG_MPC823)
#define FB_PUT_BYTE(fb, from) *(fb)++ = (255 - *(from)++)
#else
#define FB_PUT_BYTE(fb, from) *(fb)++ = *(from)++
#endif
#if defined(CONFIG_BMP_16BPP)
#if defined(CONFIG_ATMEL_LCD_BGR555)
static inline void fb_put_word(uchar **fb, uchar **from)
{
*(*fb)++ = (((*from)[0] & 0x1f) << 2) | ((*from)[1] & 0x03);
*(*fb)++ = ((*from)[0] & 0xe0) | (((*from)[1] & 0x7c) >> 2);
*from += 2;
}
#else
static inline void fb_put_word(uchar **fb, uchar **from)
{
*(*fb)++ = *(*from)++;
*(*fb)++ = *(*from)++;
}
#endif
#endif /* CONFIG_BMP_16BPP */
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
ushort *cmap = NULL;
ushort *cmap_base = NULL;
ushort i, j;
uchar *fb;
bmp_image_t *bmp = (bmp_image_t *)map_sysmem(bmp_image, 0);
uchar *bmap;
ushort padded_width;
unsigned long width, height, byte_width;
unsigned long pwidth = panel_info.vl_col;
unsigned colors, bpix, bmp_bpix;
if (!bmp || !(bmp->header.signature[0] == 'B' &&
bmp->header.signature[1] == 'M')) {
printf("Error: no valid bmp image at %lx\n", bmp_image);
return 1;
}
width = get_unaligned_le32(&bmp->header.width);
height = get_unaligned_le32(&bmp->header.height);
bmp_bpix = get_unaligned_le16(&bmp->header.bit_count);
colors = 1 << bmp_bpix;
bpix = NBITS(panel_info.vl_bpix);
if (bpix != 1 && bpix != 8 && bpix != 16 && bpix != 32) {
printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
bpix, bmp_bpix);
return 1;
}
/*
* We support displaying 8bpp BMPs on 16bpp LCDs
* and displaying 24bpp BMPs on 32bpp LCDs
* */
if (bpix != bmp_bpix &&
!(bmp_bpix == 8 && bpix == 16) &&
!(bmp_bpix == 24 && bpix == 32)) {
printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
bpix, get_unaligned_le16(&bmp->header.bit_count));
return 1;
}
debug("Display-bmp: %d x %d with %d colors\n",
(int)width, (int)height, (int)colors);
if (bmp_bpix == 8) {
cmap = configuration_get_cmap();
cmap_base = cmap;
/* Set color map */
for (i = 0; i < colors; ++i) {
bmp_color_table_entry_t cte = bmp->color_table[i];
#if !defined(CONFIG_ATMEL_LCD)
ushort colreg =
( ((cte.red) << 8) & 0xf800) |
( ((cte.green) << 3) & 0x07e0) |
( ((cte.blue) >> 3) & 0x001f) ;
*cmap = colreg;
#if defined(CONFIG_MPC823)
cmap--;
#else
cmap++;
#endif
#else /* CONFIG_ATMEL_LCD */
lcd_setcolreg(i, cte.red, cte.green, cte.blue);
#endif
}
}
padded_width = (width & 0x3 ? (width & ~0x3) + 4 : width);
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
splash_align_axis(&x, pwidth, width);
splash_align_axis(&y, panel_info.vl_row, height);
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
if ((x + width) > pwidth)
width = pwidth - x;
if ((y + height) > panel_info.vl_row)
height = panel_info.vl_row - y;
bmap = (uchar *)bmp + get_unaligned_le32(&bmp->header.data_offset);
fb = (uchar *)(lcd_base +
(y + height - 1) * lcd_line_length + x * bpix / 8);
switch (bmp_bpix) {
case 1: /* pass through */
case 8: {
#ifdef CONFIG_LCD_BMP_RLE8
u32 compression = get_unaligned_le32(&bmp->header.compression);
if (compression == BMP_BI_RLE8) {
if (bpix != 16) {
/* TODO implement render code for bpix != 16 */
printf("Error: only support 16 bpix");
return 1;
}
lcd_display_rle8_bitmap(bmp, cmap_base, fb, x, y);
break;
}
#endif
if (bpix != 16)
byte_width = width;
else
byte_width = width * 2;
for (i = 0; i < height; ++i) {
WATCHDOG_RESET();
for (j = 0; j < width; j++) {
if (bpix != 16) {
FB_PUT_BYTE(fb, bmap);
} else {
*(uint16_t *)fb = cmap_base[*(bmap++)];
fb += sizeof(uint16_t) / sizeof(*fb);
}
}
bmap += (padded_width - width);
fb -= byte_width + lcd_line_length;
}
break;
}
#if defined(CONFIG_BMP_16BPP)
case 16:
for (i = 0; i < height; ++i) {
WATCHDOG_RESET();
for (j = 0; j < width; j++)
fb_put_word(&fb, &bmap);
bmap += (padded_width - width) * 2;
fb -= width * 2 + lcd_line_length;
}
break;
#endif /* CONFIG_BMP_16BPP */
#if defined(CONFIG_BMP_24BMP)
case 24:
for (i = 0; i < height; ++i) {
for (j = 0; j < width; j++) {
*(fb++) = *(bmap++);
*(fb++) = *(bmap++);
*(fb++) = *(bmap++);
*(fb++) = 0;
}
fb -= lcd_line_length + width * (bpix / 8);
}
break;
#endif /* CONFIG_BMP_24BMP */
#if defined(CONFIG_BMP_32BPP)
case 32:
for (i = 0; i < height; ++i) {
for (j = 0; j < width; j++) {
*(fb++) = *(bmap++);
*(fb++) = *(bmap++);
*(fb++) = *(bmap++);
*(fb++) = *(bmap++);
}
fb -= lcd_line_length + width * (bpix / 8);
}
break;
#endif /* CONFIG_BMP_32BPP */
default:
break;
};
lcd_sync();
return 0;
}
#endif
static void *lcd_logo(void)
{
#ifdef CONFIG_SPLASH_SCREEN
char *s;
ulong addr;
static int do_splash = 1;
if (do_splash && (s = getenv("splashimage")) != NULL) {
int x = 0, y = 0;
do_splash = 0;
if (splash_screen_prepare())
return (void *)lcd_base;
addr = simple_strtoul (s, NULL, 16);
splash_get_pos(&x, &y);
if (bmp_display(addr, x, y) == 0)
return (void *)lcd_base;
}
#endif /* CONFIG_SPLASH_SCREEN */
bitmap_plot(0, 0);
#ifdef CONFIG_LCD_INFO
lcd_set_col(LCD_INFO_X / VIDEO_FONT_WIDTH);
lcd_set_row(LCD_INFO_Y / VIDEO_FONT_HEIGHT);
lcd_show_board_info();
#endif /* CONFIG_LCD_INFO */
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return (void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length);
#else
return (void *)lcd_base;
#endif /* CONFIG_LCD_LOGO && !defined(CONFIG_LCD_INFO_BELOW_LOGO) */
}
#ifdef CONFIG_SPLASHIMAGE_GUARD
static int on_splashimage(const char *name, const char *value, enum env_op op,
int flags)
{
ulong addr;
int aligned;
if (op == env_op_delete)
return 0;
addr = simple_strtoul(value, NULL, 16);
/* See README.displaying-bmps */
aligned = (addr % 4 == 2);
if (!aligned) {
printf("Invalid splashimage value. Value must be 16 bit aligned, but not 32 bit aligned\n");
return -1;
}
return 0;
}
U_BOOT_ENV_CALLBACK(splashimage, on_splashimage);
#endif
int lcd_get_pixel_width(void)
{
return panel_info.vl_col;
}
int lcd_get_pixel_height(void)
{
return panel_info.vl_row;
}
#if defined(CONFIG_LCD_DT_SIMPLEFB)
static int lcd_dt_simplefb_configure_node(void *blob, int off)
{
#if LCD_BPP == LCD_COLOR16
return fdt_setup_simplefb_node(blob, off, gd->fb_base,
panel_info.vl_col, panel_info.vl_row,
panel_info.vl_col * 2, "r5g6b5");
#else
return -1;
#endif
}
int lcd_dt_simplefb_add_node(void *blob)
{
static const char compat[] = "simple-framebuffer";
static const char disabled[] = "disabled";
int off, ret;
off = fdt_add_subnode(blob, 0, "framebuffer");
if (off < 0)
return -1;
ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled));
if (ret < 0)
return -1;
ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat));
if (ret < 0)
return -1;
return lcd_dt_simplefb_configure_node(blob, off);
}
int lcd_dt_simplefb_enable_existing_node(void *blob)
{
int off;
off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
if (off < 0)
return -1;
return lcd_dt_simplefb_configure_node(blob, off);
}
#endif