| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/mach-imx/boot_mode.h> |
| #include <asm/arch/crm_regs.h> |
| |
| void init_aips(void) |
| { |
| struct aipstz_regs *aips1, *aips2, *aips3; |
| |
| aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; |
| aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; |
| aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR; |
| |
| /* |
| * Set all MPROTx to be non-bufferable, trusted for R/W, |
| * not forced to user-mode. |
| */ |
| writel(0x77777777, &aips1->mprot0); |
| writel(0x77777777, &aips1->mprot1); |
| writel(0x77777777, &aips2->mprot0); |
| writel(0x77777777, &aips2->mprot1); |
| |
| /* |
| * Set all OPACRx to be non-bufferable, not require |
| * supervisor privilege level for access,allow for |
| * write access and untrusted master access. |
| */ |
| writel(0x00000000, &aips1->opacr0); |
| writel(0x00000000, &aips1->opacr1); |
| writel(0x00000000, &aips1->opacr2); |
| writel(0x00000000, &aips1->opacr3); |
| writel(0x00000000, &aips1->opacr4); |
| writel(0x00000000, &aips2->opacr0); |
| writel(0x00000000, &aips2->opacr1); |
| writel(0x00000000, &aips2->opacr2); |
| writel(0x00000000, &aips2->opacr3); |
| writel(0x00000000, &aips2->opacr4); |
| |
| if (is_mx6ull() || is_mx6sx() || is_mx7()) { |
| /* |
| * Set all MPROTx to be non-bufferable, trusted for R/W, |
| * not forced to user-mode. |
| */ |
| writel(0x77777777, &aips3->mprot0); |
| writel(0x77777777, &aips3->mprot1); |
| |
| /* |
| * Set all OPACRx to be non-bufferable, not require |
| * supervisor privilege level for access,allow for |
| * write access and untrusted master access. |
| */ |
| writel(0x00000000, &aips3->opacr0); |
| writel(0x00000000, &aips3->opacr1); |
| writel(0x00000000, &aips3->opacr2); |
| writel(0x00000000, &aips3->opacr3); |
| writel(0x00000000, &aips3->opacr4); |
| } |
| } |
| |
| void imx_wdog_disable_powerdown(void) |
| { |
| struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; |
| struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; |
| struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR; |
| #ifdef CONFIG_MX7D |
| struct wdog_regs *wdog4 = (struct wdog_regs *)WDOG4_BASE_ADDR; |
| #endif |
| |
| /* Write to the PDE (Power Down Enable) bit */ |
| writew(0, &wdog1->wmcr); |
| writew(0, &wdog2->wmcr); |
| |
| if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx7()) |
| writew(0, &wdog3->wmcr); |
| #ifdef CONFIG_MX7D |
| writew(0, &wdog4->wmcr); |
| #endif |
| } |
| |
| #define SRC_SCR_WARM_RESET_ENABLE 0 |
| |
| void init_src(void) |
| { |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| u32 val; |
| |
| /* |
| * force warm reset sources to generate cold reset |
| * for a more reliable restart |
| */ |
| val = readl(&src_regs->scr); |
| val &= ~(1 << SRC_SCR_WARM_RESET_ENABLE); |
| writel(val, &src_regs->scr); |
| } |
| |
| #ifdef CONFIG_CMD_BMODE |
| void boot_mode_apply(unsigned cfg_val) |
| { |
| #ifdef CONFIG_MX6 |
| const u32 persist_sec = IMX6_SRC_GPR10_PERSIST_SECONDARY_BOOT; |
| const u32 bmode = IMX6_SRC_GPR10_BMODE; |
| #elif CONFIG_MX7 |
| const u32 persist_sec = IMX7_SRC_GPR10_PERSIST_SECONDARY_BOOT; |
| const u32 bmode = IMX7_SRC_GPR10_BMODE; |
| #endif |
| struct src *psrc = (struct src *)SRC_BASE_ADDR; |
| unsigned reg; |
| |
| if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT) |
| clrbits_le32(&psrc->gpr10, persist_sec); |
| else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT) |
| setbits_le32(&psrc->gpr10, persist_sec); |
| else { |
| writel(cfg_val, &psrc->gpr9); |
| reg = readl(&psrc->gpr10); |
| if (cfg_val) |
| reg |= bmode; |
| else |
| reg &= ~bmode; |
| writel(reg, &psrc->gpr10); |
| } |
| } |
| #endif |
| |
| #if defined(CONFIG_MX6) |
| u32 imx6_src_get_boot_mode(void) |
| { |
| if (readl(&src_base->gpr10) & IMX6_SRC_GPR10_BMODE) |
| return readl(&src_base->gpr9); |
| else |
| return readl(&src_base->sbmr1); |
| } |
| #endif |