| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com> |
| * Copyright (C) 2013 Xilinx, Inc. All rights reserved. |
| */ |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <asm/arch/clk.h> |
| #include <asm/global_data.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static const char * const clk_names[clk_max] = { |
| "armpll", "ddrpll", "iopll", |
| "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", |
| "ddr2x", "ddr3x", "dci", |
| "lqspi", "smc", "pcap", "gem0", "gem1", |
| "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", |
| "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", "dma", |
| "usb0_aper", "usb1_aper", "gem0_aper", "gem1_aper", |
| "sdio0_aper", "sdio1_aper", "spi0_aper", "spi1_aper", |
| "can0_aper", "can1_aper", "i2c0_aper", "i2c1_aper", |
| "uart0_aper", "uart1_aper", "gpio_aper", "lqspi_aper", |
| "smc_aper", "swdt", "dbg_trc", "dbg_apb" |
| }; |
| |
| /** |
| * set_cpu_clk_info() - Setup clock information |
| * |
| * This function is called from common code after relocation and sets up the |
| * clock information. |
| */ |
| int set_cpu_clk_info(void) |
| { |
| struct clk clk; |
| struct udevice *dev; |
| ulong rate; |
| int i, ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(zynq_clk), &dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < 2; i++) { |
| clk.id = i ? ddr3x_clk : cpu_6or4x_clk; |
| ret = clk_request(dev, &clk); |
| if (ret < 0) |
| return ret; |
| |
| rate = clk_get_rate(&clk) / 1000000; |
| if (i) |
| gd->bd->bi_ddr_freq = rate; |
| else |
| gd->bd->bi_arm_freq = rate; |
| |
| clk_free(&clk); |
| } |
| gd->bd->bi_dsp_freq = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * soc_clk_dump() - Print clock frequencies |
| * Returns zero on success |
| * |
| * Implementation for the clk dump command. |
| */ |
| int soc_clk_dump(void) |
| { |
| struct udevice *dev; |
| int i, ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(zynq_clk), &dev); |
| if (ret) |
| return ret; |
| |
| printf("clk\t\tfrequency\n"); |
| for (i = 0; i < clk_max; i++) { |
| const char *name = clk_names[i]; |
| if (name) { |
| struct clk clk; |
| unsigned long rate; |
| |
| clk.id = i; |
| ret = clk_request(dev, &clk); |
| if (ret < 0) |
| return ret; |
| |
| rate = clk_get_rate(&clk); |
| |
| clk_free(&clk); |
| |
| if ((rate == (unsigned long)-ENOSYS) || |
| (rate == (unsigned long)-ENXIO)) |
| printf("%10s%20s\n", name, "unknown"); |
| else |
| printf("%10s%20lu\n", name, rate); |
| } |
| } |
| |
| return 0; |
| } |