| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <irq.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/pci.h> |
| #include <asm/pirq_routing.h> |
| #include <asm/tables.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /** |
| * pirq_reg_to_linkno() - Convert a PIRQ routing register offset to link number |
| * |
| * @priv: IRQ router driver's priv data |
| * @reg: PIRQ routing register offset from the base address |
| * @return: PIRQ link number (0 for PIRQA, 1 for PIRQB, etc) |
| */ |
| static inline int pirq_reg_to_linkno(struct irq_router *priv, int reg) |
| { |
| int linkno = 0; |
| |
| if (priv->has_regmap) { |
| struct pirq_regmap *map = priv->regmap; |
| int i; |
| |
| for (i = 0; i < priv->link_num; i++) { |
| if (reg - priv->link_base == map->offset) { |
| linkno = map->link; |
| break; |
| } |
| map++; |
| } |
| } else { |
| linkno = reg - priv->link_base; |
| } |
| |
| return linkno; |
| } |
| |
| /** |
| * pirq_linkno_to_reg() - Convert a PIRQ link number to routing register offset |
| * |
| * @priv: IRQ router driver's priv data |
| * @linkno: PIRQ link number (0 for PIRQA, 1 for PIRQB, etc) |
| * @return: PIRQ routing register offset from the base address |
| */ |
| static inline int pirq_linkno_to_reg(struct irq_router *priv, int linkno) |
| { |
| int reg = 0; |
| |
| if (priv->has_regmap) { |
| struct pirq_regmap *map = priv->regmap; |
| int i; |
| |
| for (i = 0; i < priv->link_num; i++) { |
| if (linkno == map->link) { |
| reg = map->offset + priv->link_base; |
| break; |
| } |
| map++; |
| } |
| } else { |
| reg = linkno + priv->link_base; |
| } |
| |
| return reg; |
| } |
| |
| bool pirq_check_irq_routed(struct udevice *dev, int link, u8 irq) |
| { |
| struct irq_router *priv = dev_get_priv(dev); |
| u8 pirq; |
| |
| if (priv->config == PIRQ_VIA_PCI) |
| dm_pci_read_config8(dev->parent, |
| pirq_linkno_to_reg(priv, link), &pirq); |
| else |
| pirq = readb((uintptr_t)priv->ibase + |
| pirq_linkno_to_reg(priv, link)); |
| |
| pirq &= 0xf; |
| |
| /* IRQ# 0/1/2/8/13 are reserved */ |
| if (pirq < 3 || pirq == 8 || pirq == 13) |
| return false; |
| |
| return pirq == irq ? true : false; |
| } |
| |
| int pirq_translate_link(struct udevice *dev, int link) |
| { |
| struct irq_router *priv = dev_get_priv(dev); |
| |
| return pirq_reg_to_linkno(priv, link); |
| } |
| |
| void pirq_assign_irq(struct udevice *dev, int link, u8 irq) |
| { |
| struct irq_router *priv = dev_get_priv(dev); |
| |
| /* IRQ# 0/1/2/8/13 are reserved */ |
| if (irq < 3 || irq == 8 || irq == 13) |
| return; |
| |
| if (priv->config == PIRQ_VIA_PCI) |
| dm_pci_write_config8(dev->parent, |
| pirq_linkno_to_reg(priv, link), irq); |
| else |
| writeb(irq, (uintptr_t)priv->ibase + |
| pirq_linkno_to_reg(priv, link)); |
| } |
| |
| static struct irq_info *check_dup_entry(struct irq_info *slot_base, |
| int entry_num, int bus, int device) |
| { |
| struct irq_info *slot = slot_base; |
| int i; |
| |
| for (i = 0; i < entry_num; i++) { |
| if (slot->bus == bus && slot->devfn == (device << 3)) |
| break; |
| slot++; |
| } |
| |
| return (i == entry_num) ? NULL : slot; |
| } |
| |
| static inline void fill_irq_info(struct irq_router *priv, struct irq_info *slot, |
| int bus, int device, int pin, int pirq) |
| { |
| slot->bus = bus; |
| slot->devfn = (device << 3) | 0; |
| slot->irq[pin - 1].link = pirq_linkno_to_reg(priv, pirq); |
| slot->irq[pin - 1].bitmap = priv->irq_mask; |
| } |
| |
| static int create_pirq_routing_table(struct udevice *dev) |
| { |
| struct irq_router *priv = dev_get_priv(dev); |
| const void *blob = gd->fdt_blob; |
| int node; |
| int len, count; |
| const u32 *cell; |
| struct pirq_regmap *map; |
| struct irq_routing_table *rt; |
| struct irq_info *slot, *slot_base; |
| int irq_entries = 0; |
| int i; |
| int ret; |
| |
| node = dev_of_offset(dev); |
| |
| /* extract the bdf from fdt_pci_addr */ |
| priv->bdf = dm_pci_get_bdf(dev->parent); |
| |
| ret = fdt_stringlist_search(blob, node, "intel,pirq-config", "pci"); |
| if (!ret) { |
| priv->config = PIRQ_VIA_PCI; |
| } else { |
| ret = fdt_stringlist_search(blob, node, "intel,pirq-config", |
| "ibase"); |
| if (!ret) |
| priv->config = PIRQ_VIA_IBASE; |
| else |
| return -EINVAL; |
| } |
| |
| cell = fdt_getprop(blob, node, "intel,pirq-link", &len); |
| if (!cell || len != 8) |
| return -EINVAL; |
| priv->link_base = fdt_addr_to_cpu(cell[0]); |
| priv->link_num = fdt_addr_to_cpu(cell[1]); |
| if (priv->link_num > CONFIG_MAX_PIRQ_LINKS) { |
| debug("Limiting supported PIRQ link number from %d to %d\n", |
| priv->link_num, CONFIG_MAX_PIRQ_LINKS); |
| priv->link_num = CONFIG_MAX_PIRQ_LINKS; |
| } |
| |
| cell = fdt_getprop(blob, node, "intel,pirq-regmap", &len); |
| if (cell) { |
| if (len % sizeof(struct pirq_regmap)) |
| return -EINVAL; |
| |
| count = len / sizeof(struct pirq_regmap); |
| if (count < priv->link_num) { |
| printf("Number of pirq-regmap entires is wrong\n"); |
| return -EINVAL; |
| } |
| |
| count = priv->link_num; |
| priv->regmap = calloc(count, sizeof(struct pirq_regmap)); |
| if (!priv->regmap) |
| return -ENOMEM; |
| |
| priv->has_regmap = true; |
| map = priv->regmap; |
| for (i = 0; i < count; i++) { |
| map->link = fdt_addr_to_cpu(cell[0]); |
| map->offset = fdt_addr_to_cpu(cell[1]); |
| |
| cell += sizeof(struct pirq_regmap) / sizeof(u32); |
| map++; |
| } |
| } |
| |
| priv->irq_mask = fdtdec_get_int(blob, node, |
| "intel,pirq-mask", PIRQ_BITMAP); |
| |
| if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) { |
| /* Reserve IRQ9 for SCI */ |
| priv->irq_mask &= ~(1 << 9); |
| } |
| |
| if (priv->config == PIRQ_VIA_IBASE) { |
| int ibase_off; |
| |
| ibase_off = fdtdec_get_int(blob, node, "intel,ibase-offset", 0); |
| if (!ibase_off) |
| return -EINVAL; |
| |
| /* |
| * Here we assume that the IBASE register has already been |
| * properly configured by U-Boot before. |
| * |
| * By 'valid' we mean: |
| * 1) a valid memory space carved within system memory space |
| * assigned to IBASE register block. |
| * 2) memory range decoding is enabled. |
| * Hence we don't do any santify test here. |
| */ |
| dm_pci_read_config32(dev->parent, ibase_off, &priv->ibase); |
| priv->ibase &= ~0xf; |
| } |
| |
| priv->actl_8bit = fdtdec_get_bool(blob, node, "intel,actl-8bit"); |
| priv->actl_addr = fdtdec_get_int(blob, node, "intel,actl-addr", 0); |
| |
| cell = fdt_getprop(blob, node, "intel,pirq-routing", &len); |
| if (!cell || len % sizeof(struct pirq_routing)) |
| return -EINVAL; |
| count = len / sizeof(struct pirq_routing); |
| |
| rt = calloc(1, sizeof(struct irq_routing_table)); |
| if (!rt) |
| return -ENOMEM; |
| |
| /* Populate the PIRQ table fields */ |
| rt->signature = PIRQ_SIGNATURE; |
| rt->version = PIRQ_VERSION; |
| rt->rtr_bus = PCI_BUS(priv->bdf); |
| rt->rtr_devfn = (PCI_DEV(priv->bdf) << 3) | PCI_FUNC(priv->bdf); |
| rt->rtr_vendor = PCI_VENDOR_ID_INTEL; |
| rt->rtr_device = PCI_DEVICE_ID_INTEL_ICH7_31; |
| |
| slot_base = rt->slots; |
| |
| /* Now fill in the irq_info entries in the PIRQ table */ |
| for (i = 0; i < count; |
| i++, cell += sizeof(struct pirq_routing) / sizeof(u32)) { |
| struct pirq_routing pr; |
| |
| pr.bdf = fdt_addr_to_cpu(cell[0]); |
| pr.pin = fdt_addr_to_cpu(cell[1]); |
| pr.pirq = fdt_addr_to_cpu(cell[2]); |
| |
| debug("irq_info %d: b.d.f %x.%x.%x INT%c PIRQ%c\n", |
| i, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), |
| PCI_FUNC(pr.bdf), 'A' + pr.pin - 1, |
| 'A' + pr.pirq); |
| |
| slot = check_dup_entry(slot_base, irq_entries, |
| PCI_BUS(pr.bdf), PCI_DEV(pr.bdf)); |
| if (slot) { |
| debug("found entry for bus %d device %d, ", |
| PCI_BUS(pr.bdf), PCI_DEV(pr.bdf)); |
| |
| if (slot->irq[pr.pin - 1].link) { |
| debug("skipping\n"); |
| |
| /* |
| * Sanity test on the routed PIRQ pin |
| * |
| * If they don't match, show a warning to tell |
| * there might be something wrong with the PIRQ |
| * routing information in the device tree. |
| */ |
| if (slot->irq[pr.pin - 1].link != |
| pirq_linkno_to_reg(priv, pr.pirq)) |
| debug("WARNING: Inconsistent PIRQ routing information\n"); |
| continue; |
| } |
| } else { |
| slot = slot_base + irq_entries++; |
| } |
| debug("writing INT%c\n", 'A' + pr.pin - 1); |
| fill_irq_info(priv, slot, PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), |
| pr.pin, pr.pirq); |
| } |
| |
| rt->size = irq_entries * sizeof(struct irq_info) + 32; |
| |
| /* Fix up the table checksum */ |
| rt->checksum = table_compute_checksum(rt, rt->size); |
| |
| gd->arch.pirq_routing_table = rt; |
| |
| return 0; |
| } |
| |
| static void irq_enable_sci(struct udevice *dev) |
| { |
| struct irq_router *priv = dev_get_priv(dev); |
| |
| if (priv->actl_8bit) { |
| /* Bit7 must be turned on to enable ACPI */ |
| dm_pci_write_config8(dev->parent, priv->actl_addr, 0x80); |
| } else { |
| /* Write 0 to enable SCI on IRQ9 */ |
| if (priv->config == PIRQ_VIA_PCI) |
| dm_pci_write_config32(dev->parent, priv->actl_addr, 0); |
| else |
| writel(0, (uintptr_t)priv->ibase + priv->actl_addr); |
| } |
| } |
| |
| int irq_router_probe(struct udevice *dev) |
| { |
| int ret; |
| |
| ret = create_pirq_routing_table(dev); |
| if (ret) { |
| debug("Failed to create pirq routing table\n"); |
| return ret; |
| } |
| /* Route PIRQ */ |
| pirq_route_irqs(dev, gd->arch.pirq_routing_table->slots, |
| get_irq_slot_count(gd->arch.pirq_routing_table)); |
| |
| if (IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE)) |
| irq_enable_sci(dev); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id irq_router_ids[] = { |
| { .compatible = "intel,irq-router", .data = X86_IRQT_BASE }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(irq_router_drv) = { |
| .name = "intel_irq", |
| .id = UCLASS_IRQ, |
| .of_match = irq_router_ids, |
| .probe = irq_router_probe, |
| .priv_auto = sizeof(struct irq_router), |
| }; |