| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <display.h> |
| #include <dm.h> |
| #include <dw_hdmi.h> |
| #include <edid.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/grf_rk3288.h> |
| #include <power/regulator.h> |
| #include "rk_hdmi.h" |
| |
| static int rk3288_hdmi_enable(struct udevice *dev, int panel_bpp, |
| const struct display_timing *edid) |
| { |
| struct rk_hdmi_priv *priv = dev_get_priv(dev); |
| struct display_plat *uc_plat = dev_get_uclass_platdata(dev); |
| int vop_id = uc_plat->source_id; |
| struct rk3288_grf *grf = priv->grf; |
| |
| /* hdmi source select hdmi controller */ |
| rk_setreg(&grf->soc_con6, 1 << 15); |
| |
| /* hdmi data from vop id */ |
| rk_clrsetreg(&grf->soc_con6, 1 << 4, (vop_id == 1) ? (1 << 4) : 0); |
| |
| return dw_hdmi_enable(&priv->hdmi, edid); |
| } |
| |
| static int rk3288_hdmi_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct rk_hdmi_priv *priv = dev_get_priv(dev); |
| struct dw_hdmi *hdmi = &priv->hdmi; |
| |
| hdmi->i2c_clk_high = 0x7a; |
| hdmi->i2c_clk_low = 0x8d; |
| |
| /* |
| * TODO(sjg@chromium.org): The above values don't work - these |
| * ones work better, but generate lots of errors in the data. |
| */ |
| hdmi->i2c_clk_high = 0x0d; |
| hdmi->i2c_clk_low = 0x0d; |
| |
| return rk_hdmi_ofdata_to_platdata(dev); |
| } |
| |
| static int rk3288_clk_config(struct udevice *dev) |
| { |
| struct display_plat *uc_plat = dev_get_uclass_platdata(dev); |
| struct clk clk; |
| int ret; |
| |
| /* |
| * Configure the maximum clock to permit whatever resolution the |
| * monitor wants |
| */ |
| ret = clk_get_by_index(uc_plat->src_dev, 0, &clk); |
| if (ret >= 0) { |
| ret = clk_set_rate(&clk, 384000000); |
| clk_free(&clk); |
| } |
| if (ret < 0) { |
| debug("%s: Failed to set clock in source device '%s': ret=%d\n", |
| __func__, uc_plat->src_dev->name, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const char * const rk3288_regulator_names[] = { |
| "vcc50_hdmi" |
| }; |
| |
| static int rk3288_hdmi_probe(struct udevice *dev) |
| { |
| /* Enable VOP clock for RK3288 */ |
| rk3288_clk_config(dev); |
| |
| /* Enable regulators required for HDMI */ |
| rk_hdmi_probe_regulators(dev, rk3288_regulator_names, |
| ARRAY_SIZE(rk3288_regulator_names)); |
| |
| return rk_hdmi_probe(dev); |
| } |
| |
| static const struct dm_display_ops rk3288_hdmi_ops = { |
| .read_edid = rk_hdmi_read_edid, |
| .enable = rk3288_hdmi_enable, |
| }; |
| |
| static const struct udevice_id rk3288_hdmi_ids[] = { |
| { .compatible = "rockchip,rk3288-dw-hdmi" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rk3288_hdmi_rockchip) = { |
| .name = "rk3288_hdmi_rockchip", |
| .id = UCLASS_DISPLAY, |
| .of_match = rk3288_hdmi_ids, |
| .ops = &rk3288_hdmi_ops, |
| .ofdata_to_platdata = rk3288_hdmi_ofdata_to_platdata, |
| .probe = rk3288_hdmi_probe, |
| .priv_auto = sizeof(struct rk_hdmi_priv), |
| }; |