| /* |
| * Copyright (C) 2014 Soeren Moch <smoch@web.de> |
| * |
| * Configuration settings for the TBS2910 MatrixARM board. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __TBS2910_CONFIG_H |
| #define __TBS2910_CONFIG_H |
| |
| #include "mx6_common.h" |
| #include <asm/arch/imx-regs.h> |
| #include <asm/imx-common/gpio.h> |
| |
| /* General configuration */ |
| #define CONFIG_MX6 |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO_LATE |
| #define CONFIG_SYS_THUMB_BUILD |
| |
| #define CONFIG_MACH_TYPE 3980 |
| |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_REVISION_TAG |
| #define CONFIG_SYS_GENERIC_BOARD |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| #define CONFIG_MXC_GPIO |
| #define CONFIG_CMD_GPIO |
| |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_SYS_HUSH_PARSER |
| #define CONFIG_SYS_PROMPT "Matrix U-Boot> " |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_SYS_MAXARGS 16 |
| #define CONFIG_SYS_CBSIZE 1024 |
| #define CONFIG_SYS_HZ 1000 |
| |
| /* Physical Memory Map */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR |
| |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| #define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024) |
| |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END \ |
| (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024) |
| |
| #define CONFIG_SYS_TEXT_BASE 0x80000000 |
| #define CONFIG_SYS_BOOTMAPSZ 0x6C000000 |
| #define CONFIG_SYS_LOAD_ADDR 0x10800000 |
| |
| /* Serial console */ |
| #define CONFIG_MXC_UART |
| #define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #define CONFIG_CONSOLE_MUX |
| #define CONFIG_CONS_INDEX 1 |
| |
| /* *** Command definition *** */ |
| #include <config_cmd_default.h> |
| |
| #undef CONFIG_CMD_IMLS |
| |
| #define CONFIG_CMD_BMODE |
| #define CONFIG_CMD_SETEXPR |
| #define CONFIG_CMD_MEMTEST |
| #define CONFIG_CMD_TIME |
| |
| /* Filesystems / image support */ |
| #define CONFIG_CMD_EXT4 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_EFI_PARTITION |
| #define CONFIG_CMD_FS_GENERIC |
| |
| #define CONFIG_OF_LIBFDT |
| #define CONFIG_CMD_BOOTZ |
| #define CONFIG_SUPPORT_RAW_INITRD |
| #define CONFIG_FIT |
| |
| /* MMC */ |
| #define CONFIG_FSL_ESDHC |
| #define CONFIG_FSL_USDHC |
| #define CONFIG_SYS_FSL_USDHC_NUM 3 |
| #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR |
| |
| #define CONFIG_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_SUPPORT_EMMC_BOOT |
| #define CONFIG_BOUNCE_BUFFER |
| |
| /* Ethernet */ |
| #define CONFIG_FEC_MXC |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_NET |
| #define CONFIG_FEC_MXC |
| #define CONFIG_MII |
| #define IMX_FEC_BASE ENET_BASE_ADDR |
| #define CONFIG_FEC_XCV_TYPE RGMII |
| #define CONFIG_ETHPRIME "FEC" |
| #define CONFIG_FEC_MXC_PHYADDR 4 |
| #define CONFIG_PHYLIB |
| #define CONFIG_PHY_ATHEROS |
| |
| /* Framebuffer */ |
| #define CONFIG_VIDEO |
| #ifdef CONFIG_VIDEO |
| #define CONFIG_VIDEO_IPUV3 |
| #define CONFIG_IPUV3_CLK 260000000 |
| #define CONFIG_CFB_CONSOLE |
| #define CONFIG_CFB_CONSOLE_ANSI |
| #define CONFIG_VIDEO_SW_CURSOR |
| #define CONFIG_VGA_AS_SINGLE_DEVICE |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_IMX_HDMI |
| #define CONFIG_IMX_VIDEO_SKIP |
| #define CONFIG_CMD_HDMIDETECT |
| #endif |
| |
| /* PCI */ |
| #define CONFIG_CMD_PCI |
| #ifdef CONFIG_CMD_PCI |
| #define CONFIG_PCI |
| #define CONFIG_PCI_PNP |
| #define CONFIG_PCI_SCAN_SHOW |
| #define CONFIG_PCIE_IMX |
| #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) |
| #endif |
| |
| /* SATA */ |
| #define CONFIG_CMD_SATA |
| #ifdef CONFIG_CMD_SATA |
| #define CONFIG_DWC_AHSATA |
| #define CONFIG_SYS_SATA_MAX_DEVICE 1 |
| #define CONFIG_DWC_AHSATA_PORT_ID 0 |
| #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR |
| #define CONFIG_LBA48 |
| #define CONFIG_LIBATA |
| #endif |
| |
| /* USB */ |
| #define CONFIG_CMD_USB |
| #ifdef CONFIG_CMD_USB |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_MX6 |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_CMD_USB_MASS_STORAGE |
| #ifdef CONFIG_CMD_USB_MASS_STORAGE |
| #define CONFIG_CI_UDC |
| #define CONFIG_USBD_HS |
| #define CONFIG_USB_GADGET |
| #define CONFIG_USB_GADGET_MASS_STORAGE |
| #define CONFIG_USB_GADGET_DUALSPEED |
| #define CONFIG_USB_GADGET_VBUS_DRAW 0 |
| #define CONFIG_USBDOWNLOAD_GADGET |
| #define CONFIG_G_DNL_VENDOR_NUM 0x0525 |
| #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 |
| #define CONFIG_G_DNL_MANUFACTURER "TBS" |
| #endif /* CONFIG_CMD_USB_MASS_STORAGE */ |
| #define CONFIG_USB_KEYBOARD |
| #ifdef CONFIG_USB_KEYBOARD |
| #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE |
| #define CONFIG_SYS_STDIO_DEREGISTER |
| #define CONFIG_PREBOOT \ |
| "if hdmidet; then " \ |
| "usb start; " \ |
| "run set_con_usb_hdmi; " \ |
| "else " \ |
| "run set_con_serial; " \ |
| "fi;" |
| #endif /* CONFIG_USB_KEYBOARD */ |
| #endif /* CONFIG_CMD_USB */ |
| |
| /* RTC */ |
| #define CONFIG_CMD_DATE |
| #ifdef CONFIG_CMD_DATE |
| #define CONFIG_CMD_I2C |
| #define CONFIG_RTC_DS1307 |
| #define CONFIG_SYS_RTC_BUS_NUM 2 |
| #endif |
| |
| /* I2C */ |
| #define CONFIG_CMD_I2C |
| #ifdef CONFIG_CMD_I2C |
| #define CONFIG_SYS_I2C |
| #define CONFIG_SYS_I2C_MXC |
| #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| #define CONFIG_I2C_EDID |
| #endif |
| |
| /* Fuses */ |
| #define CONFIG_CMD_FUSE |
| #ifdef CONFIG_CMD_FUSE |
| #define CONFIG_MXC_OCOTP |
| #endif |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| #define CONFIG_CMD_CACHE |
| #endif |
| |
| /* Flash and environment organization */ |
| #define CONFIG_SYS_NO_FLASH |
| |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_SYS_MMC_ENV_DEV 2 |
| #define CONFIG_SYS_MMC_ENV_PART 1 |
| #define CONFIG_ENV_SIZE (8 * 1024) |
| #define CONFIG_ENV_OFFSET (384 * 1024) |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ |
| "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ |
| "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ |
| "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \ |
| "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \ |
| "${bootargs_mmc3}\0" \ |
| "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ |
| "rdinit=/sbin/init enable_wait_mode=off\0" \ |
| "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ |
| "mmc read 0x10800000 0x800 0x4000; bootm\0" \ |
| "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ |
| "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ |
| "run bootargs_upd; " \ |
| "bootm 0x10800000 0x10d00000\0" \ |
| "console=ttymxc0\0" \ |
| "fan=gpio set 92\0" \ |
| "set_con_serial=setenv stdin serial; " \ |
| "setenv stdout serial; " \ |
| "setenv stderr serial;\0" \ |
| "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \ |
| "setenv stdout serial,vga; " \ |
| "setenv stderr serial,vga;\0" |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "mmc rescan; " \ |
| "if run bootcmd_up1; then " \ |
| "run bootcmd_up2; " \ |
| "else " \ |
| "run bootcmd_mmc; " \ |
| "fi" |
| |
| #endif /* __TBS2910_CONFIG_H * */ |