drivers/spi/designware_spi.c - platform/external/u-boot - Gitiles

 /*
  * Designware master SPI core controller driver
  *
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  *
  * Very loosely based on the Linux driver:
  * drivers/spi/spi-dw.c, which is:
  * Copyright (c) 2009, Intel Corporation.
  *
  * SPDX-License-Identifier:	GPL-2.0
  */

 #include <common.h>
 #include <dm.h>
 #include <errno.h>
 #include <malloc.h>
 #include <spi.h>
 #include <fdtdec.h>
 #include <linux/compat.h>
 #include <asm/io.h>
 #include <asm/arch/clock_manager.h>

 DECLARE_GLOBAL_DATA_PTR;

 /* Register offsets */
 #define DW_SPI_CTRL0			0x00
 #define DW_SPI_CTRL1			0x04
 #define DW_SPI_SSIENR			0x08
 #define DW_SPI_MWCR			0x0c
 #define DW_SPI_SER			0x10
 #define DW_SPI_BAUDR			0x14
 #define DW_SPI_TXFLTR			0x18
 #define DW_SPI_RXFLTR			0x1c
 #define DW_SPI_TXFLR			0x20
 #define DW_SPI_RXFLR			0x24
 #define DW_SPI_SR			0x28
 #define DW_SPI_IMR			0x2c
 #define DW_SPI_ISR			0x30
 #define DW_SPI_RISR			0x34
 #define DW_SPI_TXOICR			0x38
 #define DW_SPI_RXOICR			0x3c
 #define DW_SPI_RXUICR			0x40
 #define DW_SPI_MSTICR			0x44
 #define DW_SPI_ICR			0x48
 #define DW_SPI_DMACR			0x4c
 #define DW_SPI_DMATDLR			0x50
 #define DW_SPI_DMARDLR			0x54
 #define DW_SPI_IDR			0x58
 #define DW_SPI_VERSION			0x5c
 #define DW_SPI_DR			0x60

 /* Bit fields in CTRLR0 */
 #define SPI_DFS_OFFSET			0

 #define SPI_FRF_OFFSET			4
 #define SPI_FRF_SPI			0x0
 #define SPI_FRF_SSP			0x1
 #define SPI_FRF_MICROWIRE		0x2
 #define SPI_FRF_RESV			0x3

 #define SPI_MODE_OFFSET			6
 #define SPI_SCPH_OFFSET			6
 #define SPI_SCOL_OFFSET			7

 #define SPI_TMOD_OFFSET			8
 #define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
 #define	SPI_TMOD_TR			0x0		/* xmit & recv */
 #define SPI_TMOD_TO			0x1		/* xmit only */
 #define SPI_TMOD_RO			0x2		/* recv only */
 #define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */

 #define SPI_SLVOE_OFFSET		10
 #define SPI_SRL_OFFSET			11
 #define SPI_CFS_OFFSET			12

 /* Bit fields in SR, 7 bits */
 #define SR_MASK				GENMASK(6, 0)	/* cover 7 bits */
 #define SR_BUSY				BIT(0)
 #define SR_TF_NOT_FULL			BIT(1)
 #define SR_TF_EMPT			BIT(2)
 #define SR_RF_NOT_EMPT			BIT(3)
 #define SR_RF_FULL			BIT(4)
 #define SR_TX_ERR			BIT(5)
 #define SR_DCOL				BIT(6)

 #define RX_TIMEOUT			1000		/* timeout in ms */

 struct dw_spi_platdata {
 	s32 frequency;		/* Default clock frequency, -1 for none */
 	void __iomem *regs;
 };

 struct dw_spi_priv {
 	void __iomem *regs;
 	unsigned int freq;		/* Default frequency */
 	unsigned int mode;

 	int bits_per_word;
 	u8 cs;			/* chip select pin */
 	u8 tmode;		/* TR/TO/RO/EEPROM */
 	u8 type;		/* SPI/SSP/MicroWire */
 	int len;

 	u32 fifo_len;		/* depth of the FIFO buffer */
 	void *tx;
 	void *tx_end;
 	void *rx;
 	void *rx_end;
 };

 static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset)
 {
 	return __raw_readl(priv->regs + offset);
 }

 static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val)
 {
 	__raw_writel(val, priv->regs + offset);
 }

 static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset)
 {
 	return __raw_readw(priv->regs + offset);
 }

 static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val)
 {
 	__raw_writew(val, priv->regs + offset);
 }

 static int dw_spi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct dw_spi_platdata *plat = bus->platdata;
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);

 	plat->regs = (struct dw_spi *)devfdt_get_addr(bus);

 	/* Use 500KHz as a suitable default */
 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
 					500000);
 	debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
 	      plat->frequency);

 	return 0;
 }

 static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
 {
 	dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
 }

 /* Restart the controller, disable all interrupts, clean rx fifo */
 static void spi_hw_init(struct dw_spi_priv *priv)
 {
 	spi_enable_chip(priv, 0);
 	dw_writel(priv, DW_SPI_IMR, 0xff);
 	spi_enable_chip(priv, 1);

 	/*
 	 * Try to detect the FIFO depth if not set by interface driver,
 	 * the depth could be from 2 to 256 from HW spec
 	 */
 	if (!priv->fifo_len) {
 		u32 fifo;

 		for (fifo = 1; fifo < 256; fifo++) {
 			dw_writew(priv, DW_SPI_TXFLTR, fifo);
 			if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
 				break;
 		}

 		priv->fifo_len = (fifo == 1) ? 0 : fifo;
 		dw_writew(priv, DW_SPI_TXFLTR, 0);
 	}
 	debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
 }

 static int dw_spi_probe(struct udevice *bus)
 {
 	struct dw_spi_platdata *plat = dev_get_platdata(bus);
 	struct dw_spi_priv *priv = dev_get_priv(bus);

 	priv->regs = plat->regs;
 	priv->freq = plat->frequency;

 	/* Currently only bits_per_word == 8 supported */
 	priv->bits_per_word = 8;

 	priv->tmode = 0; /* Tx & Rx */

 	/* Basic HW init */
 	spi_hw_init(priv);

 	return 0;
 }

 /* Return the max entries we can fill into tx fifo */
 static inline u32 tx_max(struct dw_spi_priv *priv)
 {
 	u32 tx_left, tx_room, rxtx_gap;

 	tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
 	tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR);

 	/*
 	 * Another concern is about the tx/rx mismatch, we
 	 * thought about using (priv->fifo_len - rxflr - txflr) as
 	 * one maximum value for tx, but it doesn't cover the
 	 * data which is out of tx/rx fifo and inside the
 	 * shift registers. So a control from sw point of
 	 * view is taken.
 	 */
 	rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
 		(priv->bits_per_word >> 3);

 	return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
 }

 /* Return the max entries we should read out of rx fifo */
 static inline u32 rx_max(struct dw_spi_priv *priv)
 {
 	u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);

 	return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR));
 }

 static void dw_writer(struct dw_spi_priv *priv)
 {
 	u32 max = tx_max(priv);
 	u16 txw = 0;

 	while (max--) {
 		/* Set the tx word if the transfer's original "tx" is not null */
 		if (priv->tx_end - priv->len) {
 			if (priv->bits_per_word == 8)
 				txw = *(u8 *)(priv->tx);
 			else
 				txw = *(u16 *)(priv->tx);
 		}
 		dw_writew(priv, DW_SPI_DR, txw);
 		debug("%s: tx=0x%02x\n", __func__, txw);
 		priv->tx += priv->bits_per_word >> 3;
 	}
 }

 static int dw_reader(struct dw_spi_priv *priv)
 {
 	unsigned start = get_timer(0);
 	u32 max;
 	u16 rxw;

 	/* Wait for rx data to be ready */
 	while (rx_max(priv) == 0) {
 		if (get_timer(start) > RX_TIMEOUT)
 			return -ETIMEDOUT;
 	}

 	max = rx_max(priv);

 	while (max--) {
 		rxw = dw_readw(priv, DW_SPI_DR);
 		debug("%s: rx=0x%02x\n", __func__, rxw);

 		/*
 		 * Care about rx only if the transfer's original "rx" is
 		 * not null
 		 */
 		if (priv->rx_end - priv->len) {
 			if (priv->bits_per_word == 8)
 				*(u8 *)(priv->rx) = rxw;
 			else
 				*(u16 *)(priv->rx) = rxw;
 		}
 		priv->rx += priv->bits_per_word >> 3;
 	}

 	return 0;
 }

 static int poll_transfer(struct dw_spi_priv *priv)
 {
 	int ret;

 	do {
 		dw_writer(priv);
 		ret = dw_reader(priv);
 		if (ret < 0)
 			return ret;
 	} while (priv->rx_end > priv->rx);

 	return 0;
 }

 static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
 		       const void *dout, void *din, unsigned long flags)
 {
 	struct udevice *bus = dev->parent;
 	struct dw_spi_priv *priv = dev_get_priv(bus);
 	const u8 *tx = dout;
 	u8 *rx = din;
 	int ret = 0;
 	u32 cr0 = 0;
 	u32 cs;

 	/* spi core configured to do 8 bit transfers */
 	if (bitlen % 8) {
 		debug("Non byte aligned SPI transfer.\n");
 		return -1;
 	}

 	cr0 = (priv->bits_per_word - 1) | (priv->type << SPI_FRF_OFFSET) |
 		(priv->mode << SPI_MODE_OFFSET) |
 		(priv->tmode << SPI_TMOD_OFFSET);

 	if (rx && tx)
 		priv->tmode = SPI_TMOD_TR;
 	else if (rx)
 		priv->tmode = SPI_TMOD_RO;
 	else
 		priv->tmode = SPI_TMOD_TO;

 	cr0 &= ~SPI_TMOD_MASK;
 	cr0 |= (priv->tmode << SPI_TMOD_OFFSET);

 	priv->len = bitlen >> 3;
 	debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);

 	priv->tx = (void *)tx;
 	priv->tx_end = priv->tx + priv->len;
 	priv->rx = rx;
 	priv->rx_end = priv->rx + priv->len;

 	/* Disable controller before writing control registers */
 	spi_enable_chip(priv, 0);

 	debug("%s: cr0=%08x\n", __func__, cr0);
 	/* Reprogram cr0 only if changed */
 	if (dw_readw(priv, DW_SPI_CTRL0) != cr0)
 		dw_writew(priv, DW_SPI_CTRL0, cr0);

 	/*
 	 * Configure the desired SS (slave select 0...3) in the controller
 	 * The DW SPI controller will activate and deactivate this CS
 	 * automatically. So no cs_activate() etc is needed in this driver.
 	 */
 	cs = spi_chip_select(dev);
 	dw_writel(priv, DW_SPI_SER, 1 << cs);

 	/* Enable controller after writing control registers */
 	spi_enable_chip(priv, 1);

 	/* Start transfer in a polling loop */
 	ret = poll_transfer(priv);

 	return ret;
 }

 static int dw_spi_set_speed(struct udevice *bus, uint speed)
 {
 	struct dw_spi_platdata *plat = bus->platdata;
 	struct dw_spi_priv *priv = dev_get_priv(bus);
 	u16 clk_div;

 	if (speed > plat->frequency)
 		speed = plat->frequency;

 	/* Disable controller before writing control registers */
 	spi_enable_chip(priv, 0);

 	/* clk_div doesn't support odd number */
 	clk_div = cm_get_spi_controller_clk_hz() / speed;
 	clk_div = (clk_div + 1) & 0xfffe;
 	dw_writel(priv, DW_SPI_BAUDR, clk_div);

 	/* Enable controller after writing control registers */
 	spi_enable_chip(priv, 1);

 	priv->freq = speed;
 	debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
 	      priv->freq, clk_div);

 	return 0;
 }

 static int dw_spi_set_mode(struct udevice *bus, uint mode)
 {
 	struct dw_spi_priv *priv = dev_get_priv(bus);

 	/*
 	 * Can't set mode yet. Since this depends on if rx, tx, or
 	 * rx & tx is requested. So we have to defer this to the
 	 * real transfer function.
 	 */
 	priv->mode = mode;
 	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);

 	return 0;
 }

 static const struct dm_spi_ops dw_spi_ops = {
 	.xfer		= dw_spi_xfer,
 	.set_speed	= dw_spi_set_speed,
 	.set_mode	= dw_spi_set_mode,
 	/*
 	 * cs_info is not needed, since we require all chip selects to be
 	 * in the device tree explicitly
 	 */
 };

 static const struct udevice_id dw_spi_ids[] = {
 	{ .compatible = "snps,dw-apb-ssi" },
 	{ }
 };

 U_BOOT_DRIVER(dw_spi) = {
 	.name = "dw_spi",
 	.id = UCLASS_SPI,
 	.of_match = dw_spi_ids,
 	.ops = &dw_spi_ops,
 	.ofdata_to_platdata = dw_spi_ofdata_to_platdata,
 	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
 	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
 	.probe = dw_spi_probe,
 };
	/*
	* Designware master SPI core controller driver
	*
	* Copyright (C) 2014 Stefan Roese <sr@denx.de>
	*
	* Very loosely based on the Linux driver:
	* drivers/spi/spi-dw.c, which is:
	* Copyright (c) 2009, Intel Corporation.
	*
	* SPDX-License-Identifier: GPL-2.0
	*/

	#include <common.h>
	#include <dm.h>
	#include <errno.h>
	#include <malloc.h>
	#include <spi.h>
	#include <fdtdec.h>
	#include <linux/compat.h>
	#include <asm/io.h>
	#include <asm/arch/clock_manager.h>

	DECLARE_GLOBAL_DATA_PTR;

	/* Register offsets */
	#define DW_SPI_CTRL0 0x00
	#define DW_SPI_CTRL1 0x04
	#define DW_SPI_SSIENR 0x08
	#define DW_SPI_MWCR 0x0c
	#define DW_SPI_SER 0x10
	#define DW_SPI_BAUDR 0x14
	#define DW_SPI_TXFLTR 0x18
	#define DW_SPI_RXFLTR 0x1c
	#define DW_SPI_TXFLR 0x20
	#define DW_SPI_RXFLR 0x24
	#define DW_SPI_SR 0x28
	#define DW_SPI_IMR 0x2c
	#define DW_SPI_ISR 0x30
	#define DW_SPI_RISR 0x34
	#define DW_SPI_TXOICR 0x38
	#define DW_SPI_RXOICR 0x3c
	#define DW_SPI_RXUICR 0x40
	#define DW_SPI_MSTICR 0x44
	#define DW_SPI_ICR 0x48
	#define DW_SPI_DMACR 0x4c
	#define DW_SPI_DMATDLR 0x50
	#define DW_SPI_DMARDLR 0x54
	#define DW_SPI_IDR 0x58
	#define DW_SPI_VERSION 0x5c
	#define DW_SPI_DR 0x60

	/* Bit fields in CTRLR0 */
	#define SPI_DFS_OFFSET 0

	#define SPI_FRF_OFFSET 4
	#define SPI_FRF_SPI 0x0
	#define SPI_FRF_SSP 0x1
	#define SPI_FRF_MICROWIRE 0x2
	#define SPI_FRF_RESV 0x3

	#define SPI_MODE_OFFSET 6
	#define SPI_SCPH_OFFSET 6
	#define SPI_SCOL_OFFSET 7

	#define SPI_TMOD_OFFSET 8
	#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
	#define SPI_TMOD_TR 0x0 /* xmit & recv */
	#define SPI_TMOD_TO 0x1 /* xmit only */
	#define SPI_TMOD_RO 0x2 /* recv only */
	#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */

	#define SPI_SLVOE_OFFSET 10
	#define SPI_SRL_OFFSET 11
	#define SPI_CFS_OFFSET 12

	/* Bit fields in SR, 7 bits */
	#define SR_MASK GENMASK(6, 0) /* cover 7 bits */
	#define SR_BUSY BIT(0)
	#define SR_TF_NOT_FULL BIT(1)
	#define SR_TF_EMPT BIT(2)
	#define SR_RF_NOT_EMPT BIT(3)
	#define SR_RF_FULL BIT(4)
	#define SR_TX_ERR BIT(5)
	#define SR_DCOL BIT(6)

	#define RX_TIMEOUT 1000 /* timeout in ms */

	struct dw_spi_platdata {
	s32 frequency; /* Default clock frequency, -1 for none */
	void __iomem *regs;
	};

	struct dw_spi_priv {
	void __iomem *regs;
	unsigned int freq; /* Default frequency */
	unsigned int mode;

	int bits_per_word;
	u8 cs; /* chip select pin */
	u8 tmode; /* TR/TO/RO/EEPROM */
	u8 type; /* SPI/SSP/MicroWire */
	int len;

	u32 fifo_len; /* depth of the FIFO buffer */
	void *tx;
	void *tx_end;
	void *rx;
	void *rx_end;
	};

	static inline u32 dw_readl(struct dw_spi_priv *priv, u32 offset)
	{
	return __raw_readl(priv->regs + offset);
	}

	static inline void dw_writel(struct dw_spi_priv *priv, u32 offset, u32 val)
	{
	__raw_writel(val, priv->regs + offset);
	}

	static inline u16 dw_readw(struct dw_spi_priv *priv, u32 offset)
	{
	return __raw_readw(priv->regs + offset);
	}

	static inline void dw_writew(struct dw_spi_priv *priv, u32 offset, u16 val)
	{
	__raw_writew(val, priv->regs + offset);
	}

	static int dw_spi_ofdata_to_platdata(struct udevice *bus)
	{
	struct dw_spi_platdata *plat = bus->platdata;
	const void *blob = gd->fdt_blob;
	int node = dev_of_offset(bus);

	plat->regs = (struct dw_spi *)devfdt_get_addr(bus);

	/* Use 500KHz as a suitable default */
	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
	500000);
	debug("%s: regs=%p max-frequency=%d\n", __func__, plat->regs,
	plat->frequency);

	return 0;
	}

	static inline void spi_enable_chip(struct dw_spi_priv *priv, int enable)
	{
	dw_writel(priv, DW_SPI_SSIENR, (enable ? 1 : 0));
	}

	/* Restart the controller, disable all interrupts, clean rx fifo */
	static void spi_hw_init(struct dw_spi_priv *priv)
	{
	spi_enable_chip(priv, 0);
	dw_writel(priv, DW_SPI_IMR, 0xff);
	spi_enable_chip(priv, 1);

	/*
	* Try to detect the FIFO depth if not set by interface driver,
	* the depth could be from 2 to 256 from HW spec
	*/
	if (!priv->fifo_len) {
	u32 fifo;

	for (fifo = 1; fifo < 256; fifo++) {
	dw_writew(priv, DW_SPI_TXFLTR, fifo);
	if (fifo != dw_readw(priv, DW_SPI_TXFLTR))
	break;
	}

	priv->fifo_len = (fifo == 1) ? 0 : fifo;
	dw_writew(priv, DW_SPI_TXFLTR, 0);
	}
	debug("%s: fifo_len=%d\n", __func__, priv->fifo_len);
	}

	static int dw_spi_probe(struct udevice *bus)
	{
	struct dw_spi_platdata *plat = dev_get_platdata(bus);
	struct dw_spi_priv *priv = dev_get_priv(bus);

	priv->regs = plat->regs;
	priv->freq = plat->frequency;

	/* Currently only bits_per_word == 8 supported */
	priv->bits_per_word = 8;

	priv->tmode = 0; /* Tx & Rx */

	/* Basic HW init */
	spi_hw_init(priv);

	return 0;
	}

	/* Return the max entries we can fill into tx fifo */
	static inline u32 tx_max(struct dw_spi_priv *priv)
	{
	u32 tx_left, tx_room, rxtx_gap;

	tx_left = (priv->tx_end - priv->tx) / (priv->bits_per_word >> 3);
	tx_room = priv->fifo_len - dw_readw(priv, DW_SPI_TXFLR);

	/*
	* Another concern is about the tx/rx mismatch, we
	* thought about using (priv->fifo_len - rxflr - txflr) as
	* one maximum value for tx, but it doesn't cover the
	* data which is out of tx/rx fifo and inside the
	* shift registers. So a control from sw point of
	* view is taken.
	*/
	rxtx_gap = ((priv->rx_end - priv->rx) - (priv->tx_end - priv->tx)) /
	(priv->bits_per_word >> 3);

	return min3(tx_left, tx_room, (u32)(priv->fifo_len - rxtx_gap));
	}

	/* Return the max entries we should read out of rx fifo */
	static inline u32 rx_max(struct dw_spi_priv *priv)
	{
	u32 rx_left = (priv->rx_end - priv->rx) / (priv->bits_per_word >> 3);

	return min_t(u32, rx_left, dw_readw(priv, DW_SPI_RXFLR));
	}

	static void dw_writer(struct dw_spi_priv *priv)
	{
	u32 max = tx_max(priv);
	u16 txw = 0;

	while (max--) {
	/* Set the tx word if the transfer's original "tx" is not null */
	if (priv->tx_end - priv->len) {
	if (priv->bits_per_word == 8)
	txw = (u8 )(priv->tx);
	else
	txw = (u16 )(priv->tx);
	}
	dw_writew(priv, DW_SPI_DR, txw);
	debug("%s: tx=0x%02x\n", __func__, txw);
	priv->tx += priv->bits_per_word >> 3;
	}
	}

	static int dw_reader(struct dw_spi_priv *priv)
	{
	unsigned start = get_timer(0);
	u32 max;
	u16 rxw;

	/* Wait for rx data to be ready */
	while (rx_max(priv) == 0) {
	if (get_timer(start) > RX_TIMEOUT)
	return -ETIMEDOUT;
	}

	max = rx_max(priv);

	while (max--) {
	rxw = dw_readw(priv, DW_SPI_DR);
	debug("%s: rx=0x%02x\n", __func__, rxw);

	/*
	* Care about rx only if the transfer's original "rx" is
	* not null
	*/
	if (priv->rx_end - priv->len) {
	if (priv->bits_per_word == 8)
	(u8 )(priv->rx) = rxw;
	else
	(u16 )(priv->rx) = rxw;
	}
	priv->rx += priv->bits_per_word >> 3;
	}

	return 0;
	}

	static int poll_transfer(struct dw_spi_priv *priv)
	{
	int ret;

	do {
	dw_writer(priv);
	ret = dw_reader(priv);
	if (ret < 0)
	return ret;
	} while (priv->rx_end > priv->rx);

	return 0;
	}

	static int dw_spi_xfer(struct udevice *dev, unsigned int bitlen,
	const void dout, void din, unsigned long flags)
	{
	struct udevice *bus = dev->parent;
	struct dw_spi_priv *priv = dev_get_priv(bus);
	const u8 *tx = dout;
	u8 *rx = din;
	int ret = 0;
	u32 cr0 = 0;
	u32 cs;

	/* spi core configured to do 8 bit transfers */
	if (bitlen % 8) {
	debug("Non byte aligned SPI transfer.\n");
	return -1;
	}

	cr0 = (priv->bits_per_word - 1) \| (priv->type << SPI_FRF_OFFSET) \|
	(priv->mode << SPI_MODE_OFFSET) \|
	(priv->tmode << SPI_TMOD_OFFSET);

	if (rx && tx)
	priv->tmode = SPI_TMOD_TR;
	else if (rx)
	priv->tmode = SPI_TMOD_RO;
	else
	priv->tmode = SPI_TMOD_TO;

	cr0 &= ~SPI_TMOD_MASK;
	cr0 \|= (priv->tmode << SPI_TMOD_OFFSET);

	priv->len = bitlen >> 3;
	debug("%s: rx=%p tx=%p len=%d [bytes]\n", __func__, rx, tx, priv->len);

	priv->tx = (void *)tx;
	priv->tx_end = priv->tx + priv->len;
	priv->rx = rx;
	priv->rx_end = priv->rx + priv->len;

	/* Disable controller before writing control registers */
	spi_enable_chip(priv, 0);

	debug("%s: cr0=%08x\n", __func__, cr0);
	/* Reprogram cr0 only if changed */
	if (dw_readw(priv, DW_SPI_CTRL0) != cr0)
	dw_writew(priv, DW_SPI_CTRL0, cr0);

	/*
	* Configure the desired SS (slave select 0...3) in the controller
	* The DW SPI controller will activate and deactivate this CS
	* automatically. So no cs_activate() etc is needed in this driver.
	*/
	cs = spi_chip_select(dev);
	dw_writel(priv, DW_SPI_SER, 1 << cs);

	/* Enable controller after writing control registers */
	spi_enable_chip(priv, 1);

	/* Start transfer in a polling loop */
	ret = poll_transfer(priv);

	return ret;
	}

	static int dw_spi_set_speed(struct udevice *bus, uint speed)
	{
	struct dw_spi_platdata *plat = bus->platdata;
	struct dw_spi_priv *priv = dev_get_priv(bus);
	u16 clk_div;

	if (speed > plat->frequency)
	speed = plat->frequency;

	/* Disable controller before writing control registers */
	spi_enable_chip(priv, 0);

	/* clk_div doesn't support odd number */
	clk_div = cm_get_spi_controller_clk_hz() / speed;
	clk_div = (clk_div + 1) & 0xfffe;
	dw_writel(priv, DW_SPI_BAUDR, clk_div);

	/* Enable controller after writing control registers */
	spi_enable_chip(priv, 1);

	priv->freq = speed;
	debug("%s: regs=%p speed=%d clk_div=%d\n", __func__, priv->regs,
	priv->freq, clk_div);

	return 0;
	}

	static int dw_spi_set_mode(struct udevice *bus, uint mode)
	{
	struct dw_spi_priv *priv = dev_get_priv(bus);

	/*
	* Can't set mode yet. Since this depends on if rx, tx, or
	* rx & tx is requested. So we have to defer this to the
	* real transfer function.
	*/
	priv->mode = mode;
	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);

	return 0;
	}

	static const struct dm_spi_ops dw_spi_ops = {
	.xfer = dw_spi_xfer,
	.set_speed = dw_spi_set_speed,
	.set_mode = dw_spi_set_mode,
	/*
	* cs_info is not needed, since we require all chip selects to be
	* in the device tree explicitly
	*/
	};

	static const struct udevice_id dw_spi_ids[] = {
	{ .compatible = "snps,dw-apb-ssi" },
	{ }
	};

	U_BOOT_DRIVER(dw_spi) = {
	.name = "dw_spi",
	.id = UCLASS_SPI,
	.of_match = dw_spi_ids,
	.ops = &dw_spi_ops,
	.ofdata_to_platdata = dw_spi_ofdata_to_platdata,
	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
	.probe = dw_spi_probe,
	};