| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. |
| * |
| * Author: Scott Wood <scottwood@freescale.com> |
| * Dave Liu <daveliu@freescale.com> |
| */ |
| |
| #include <common.h> |
| #include <hwconfig.h> |
| #include <i2c.h> |
| #include <init.h> |
| #include <net.h> |
| #include <asm/global_data.h> |
| #include <linux/delay.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #include <pci.h> |
| #include <mpc83xx.h> |
| #include <netdev.h> |
| #include <asm/io.h> |
| #include <ns16550.h> |
| #include <nand.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_early_init_f(void) |
| { |
| volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| |
| if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) |
| gd->flags |= GD_FLG_SILENT; |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_NAND_SPL |
| |
| static u8 read_board_info(void) |
| { |
| u8 val8; |
| i2c_set_bus_num(0); |
| |
| if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) |
| return val8; |
| else |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| static const char * const rev_str[] = { |
| "0.0", |
| "0.1", |
| "1.0", |
| "1.1", |
| "<unknown>", |
| }; |
| u8 info; |
| int i; |
| |
| info = read_board_info(); |
| i = (!info) ? 4: info & 0x03; |
| |
| printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]); |
| |
| return 0; |
| } |
| |
| static struct pci_region pci_regions[] = { |
| { |
| bus_start: CONFIG_SYS_PCI_MEM_BASE, |
| phys_start: CONFIG_SYS_PCI_MEM_PHYS, |
| size: CONFIG_SYS_PCI_MEM_SIZE, |
| flags: PCI_REGION_MEM | PCI_REGION_PREFETCH |
| }, |
| { |
| bus_start: CONFIG_SYS_PCI_MMIO_BASE, |
| phys_start: CONFIG_SYS_PCI_MMIO_PHYS, |
| size: CONFIG_SYS_PCI_MMIO_SIZE, |
| flags: PCI_REGION_MEM |
| }, |
| { |
| bus_start: CONFIG_SYS_PCI_IO_BASE, |
| phys_start: CONFIG_SYS_PCI_IO_PHYS, |
| size: CONFIG_SYS_PCI_IO_SIZE, |
| flags: PCI_REGION_IO |
| } |
| }; |
| |
| static struct pci_region pcie_regions_0[] = { |
| { |
| .bus_start = CONFIG_SYS_PCIE1_MEM_BASE, |
| .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS, |
| .size = CONFIG_SYS_PCIE1_MEM_SIZE, |
| .flags = PCI_REGION_MEM, |
| }, |
| { |
| .bus_start = CONFIG_SYS_PCIE1_IO_BASE, |
| .phys_start = CONFIG_SYS_PCIE1_IO_PHYS, |
| .size = CONFIG_SYS_PCIE1_IO_SIZE, |
| .flags = PCI_REGION_IO, |
| }, |
| }; |
| |
| static struct pci_region pcie_regions_1[] = { |
| { |
| .bus_start = CONFIG_SYS_PCIE2_MEM_BASE, |
| .phys_start = CONFIG_SYS_PCIE2_MEM_PHYS, |
| .size = CONFIG_SYS_PCIE2_MEM_SIZE, |
| .flags = PCI_REGION_MEM, |
| }, |
| { |
| .bus_start = CONFIG_SYS_PCIE2_IO_BASE, |
| .phys_start = CONFIG_SYS_PCIE2_IO_PHYS, |
| .size = CONFIG_SYS_PCIE2_IO_SIZE, |
| .flags = PCI_REGION_IO, |
| }, |
| }; |
| |
| void pci_init_board(void) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; |
| volatile sysconf83xx_t *sysconf = &immr->sysconf; |
| volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; |
| volatile law83xx_t *pci_law = immr->sysconf.pcilaw; |
| volatile law83xx_t *pcie_law = sysconf->pcielaw; |
| struct pci_region *reg[] = { pci_regions }; |
| struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, }; |
| |
| /* Enable all 3 PCI_CLK_OUTPUTs. */ |
| clk->occr |= 0xe0000000; |
| |
| /* |
| * Configure PCI Local Access Windows |
| */ |
| pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; |
| pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; |
| |
| pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; |
| pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; |
| |
| mpc83xx_pci_init(1, reg); |
| |
| /* Configure the clock for PCIE controller */ |
| clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM, |
| SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1); |
| |
| /* Deassert the resets in the control register */ |
| out_be32(&sysconf->pecr1, 0xE0008000); |
| out_be32(&sysconf->pecr2, 0xE0008000); |
| udelay(2000); |
| |
| /* Configure PCI Express Local Access Windows */ |
| out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR); |
| out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB); |
| |
| out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR); |
| out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB); |
| |
| mpc83xx_pcie_init(2, pcie_reg); |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| void fdt_tsec1_fixup(void *fdt, struct bd_info *bd) |
| { |
| const char disabled[] = "disabled"; |
| const char *path; |
| int ret; |
| |
| if (hwconfig_arg_cmp("board_type", "tsec1")) { |
| return; |
| } else if (!hwconfig_arg_cmp("board_type", "ulpi")) { |
| printf("NOTICE: No or unknown board_type hwconfig specified.\n" |
| " Assuming board with TSEC1.\n"); |
| return; |
| } |
| |
| ret = fdt_path_offset(fdt, "/aliases"); |
| if (ret < 0) { |
| printf("WARNING: can't find /aliases node\n"); |
| return; |
| } |
| |
| path = fdt_getprop(fdt, ret, "ethernet0", NULL); |
| if (!path) { |
| printf("WARNING: can't find ethernet0 alias\n"); |
| return; |
| } |
| |
| do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1); |
| } |
| |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| fsl_fdt_fixup_dr_usb(blob, bd); |
| fdt_tsec1_fixup(blob, bd); |
| |
| return 0; |
| } |
| #endif |
| |
| int board_eth_init(struct bd_info *bis) |
| { |
| cpu_eth_init(bis); /* Initialize TSECs first */ |
| return pci_eth_init(bis); |
| } |
| |
| #else /* CONFIG_NAND_SPL */ |
| |
| int checkboard(void) |
| { |
| puts("Board: Freescale MPC8315ERDB\n"); |
| return 0; |
| } |
| |
| void board_init_f(ulong bootflag) |
| { |
| board_early_init_f(); |
| ns16550_init((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), |
| CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); |
| puts("NAND boot... "); |
| timer_init(); |
| dram_init(); |
| relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, |
| CONFIG_SYS_NAND_U_BOOT_RELOC); |
| } |
| |
| void board_init_r(gd_t *gd, ulong dest_addr) |
| { |
| nand_boot(); |
| } |
| |
| void putc(char c) |
| { |
| if (gd->flags & GD_FLG_SILENT) |
| return; |
| |
| if (c == '\n') |
| ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), '\r'); |
| |
| ns16550_putc((struct ns16550 *)(CONFIG_SYS_IMMR + 0x4500), c); |
| } |
| |
| #endif /* CONFIG_NAND_SPL */ |