| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2010-2011 Calxeda, Inc. |
| * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <lcd.h> |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #include <errno.h> |
| #include <linux/list.h> |
| |
| #include <splash.h> |
| #include <asm/io.h> |
| |
| #include "menu.h" |
| #include "cli.h" |
| |
| #include "pxe_utils.h" |
| |
| #define MAX_TFTP_PATH_LEN 512 |
| |
| bool is_pxe; |
| |
| /* |
| * Convert an ethaddr from the environment to the format used by pxelinux |
| * filenames based on mac addresses. Convert's ':' to '-', and adds "01-" to |
| * the beginning of the ethernet address to indicate a hardware type of |
| * Ethernet. Also converts uppercase hex characters into lowercase, to match |
| * pxelinux's behavior. |
| * |
| * Returns 1 for success, -ENOENT if 'ethaddr' is undefined in the |
| * environment, or some other value < 0 on error. |
| */ |
| int format_mac_pxe(char *outbuf, size_t outbuf_len) |
| { |
| uchar ethaddr[6]; |
| |
| if (outbuf_len < 21) { |
| printf("outbuf is too small (%zd < 21)\n", outbuf_len); |
| |
| return -EINVAL; |
| } |
| |
| if (!eth_env_get_enetaddr_by_index("eth", eth_get_dev_index(), ethaddr)) |
| return -ENOENT; |
| |
| sprintf(outbuf, "01-%02x-%02x-%02x-%02x-%02x-%02x", |
| ethaddr[0], ethaddr[1], ethaddr[2], |
| ethaddr[3], ethaddr[4], ethaddr[5]); |
| |
| return 1; |
| } |
| |
| /* |
| * Returns the directory the file specified in the bootfile env variable is |
| * in. If bootfile isn't defined in the environment, return NULL, which should |
| * be interpreted as "don't prepend anything to paths". |
| */ |
| static int get_bootfile_path(const char *file_path, char *bootfile_path, |
| size_t bootfile_path_size) |
| { |
| char *bootfile, *last_slash; |
| size_t path_len = 0; |
| |
| /* Only syslinux allows absolute paths */ |
| if (file_path[0] == '/' && !is_pxe) |
| goto ret; |
| |
| bootfile = from_env("bootfile"); |
| |
| if (!bootfile) |
| goto ret; |
| |
| last_slash = strrchr(bootfile, '/'); |
| |
| if (!last_slash) |
| goto ret; |
| |
| path_len = (last_slash - bootfile) + 1; |
| |
| if (bootfile_path_size < path_len) { |
| printf("bootfile_path too small. (%zd < %zd)\n", |
| bootfile_path_size, path_len); |
| |
| return -1; |
| } |
| |
| strncpy(bootfile_path, bootfile, path_len); |
| |
| ret: |
| bootfile_path[path_len] = '\0'; |
| |
| return 1; |
| } |
| |
| int (*do_getfile)(cmd_tbl_t *cmdtp, const char *file_path, char *file_addr); |
| |
| /* |
| * As in pxelinux, paths to files referenced from files we retrieve are |
| * relative to the location of bootfile. get_relfile takes such a path and |
| * joins it with the bootfile path to get the full path to the target file. If |
| * the bootfile path is NULL, we use file_path as is. |
| * |
| * Returns 1 for success, or < 0 on error. |
| */ |
| static int get_relfile(cmd_tbl_t *cmdtp, const char *file_path, |
| unsigned long file_addr) |
| { |
| size_t path_len; |
| char relfile[MAX_TFTP_PATH_LEN + 1]; |
| char addr_buf[18]; |
| int err; |
| |
| err = get_bootfile_path(file_path, relfile, sizeof(relfile)); |
| |
| if (err < 0) |
| return err; |
| |
| path_len = strlen(file_path); |
| path_len += strlen(relfile); |
| |
| if (path_len > MAX_TFTP_PATH_LEN) { |
| printf("Base path too long (%s%s)\n", relfile, file_path); |
| |
| return -ENAMETOOLONG; |
| } |
| |
| strcat(relfile, file_path); |
| |
| printf("Retrieving file: %s\n", relfile); |
| |
| sprintf(addr_buf, "%lx", file_addr); |
| |
| return do_getfile(cmdtp, relfile, addr_buf); |
| } |
| |
| /* |
| * Retrieve the file at 'file_path' to the locate given by 'file_addr'. If |
| * 'bootfile' was specified in the environment, the path to bootfile will be |
| * prepended to 'file_path' and the resulting path will be used. |
| * |
| * Returns 1 on success, or < 0 for error. |
| */ |
| int get_pxe_file(cmd_tbl_t *cmdtp, const char *file_path, |
| unsigned long file_addr) |
| { |
| unsigned long config_file_size; |
| char *tftp_filesize; |
| int err; |
| char *buf; |
| |
| err = get_relfile(cmdtp, file_path, file_addr); |
| |
| if (err < 0) |
| return err; |
| |
| /* |
| * the file comes without a NUL byte at the end, so find out its size |
| * and add the NUL byte. |
| */ |
| tftp_filesize = from_env("filesize"); |
| |
| if (!tftp_filesize) |
| return -ENOENT; |
| |
| if (strict_strtoul(tftp_filesize, 16, &config_file_size) < 0) |
| return -EINVAL; |
| |
| buf = map_sysmem(file_addr + config_file_size, 1); |
| *buf = '\0'; |
| unmap_sysmem(buf); |
| |
| return 1; |
| } |
| |
| #define PXELINUX_DIR "pxelinux.cfg/" |
| |
| /* |
| * Retrieves a file in the 'pxelinux.cfg' folder. Since this uses get_pxe_file |
| * to do the hard work, the location of the 'pxelinux.cfg' folder is generated |
| * from the bootfile path, as described above. |
| * |
| * Returns 1 on success or < 0 on error. |
| */ |
| int get_pxelinux_path(cmd_tbl_t *cmdtp, const char *file, |
| unsigned long pxefile_addr_r) |
| { |
| size_t base_len = strlen(PXELINUX_DIR); |
| char path[MAX_TFTP_PATH_LEN + 1]; |
| |
| if (base_len + strlen(file) > MAX_TFTP_PATH_LEN) { |
| printf("path (%s%s) too long, skipping\n", |
| PXELINUX_DIR, file); |
| return -ENAMETOOLONG; |
| } |
| |
| sprintf(path, PXELINUX_DIR "%s", file); |
| |
| return get_pxe_file(cmdtp, path, pxefile_addr_r); |
| } |
| |
| /* |
| * Wrapper to make it easier to store the file at file_path in the location |
| * specified by envaddr_name. file_path will be joined to the bootfile path, |
| * if any is specified. |
| * |
| * Returns 1 on success or < 0 on error. |
| */ |
| static int get_relfile_envaddr(cmd_tbl_t *cmdtp, const char *file_path, |
| const char *envaddr_name) |
| { |
| unsigned long file_addr; |
| char *envaddr; |
| |
| envaddr = from_env(envaddr_name); |
| |
| if (!envaddr) |
| return -ENOENT; |
| |
| if (strict_strtoul(envaddr, 16, &file_addr) < 0) |
| return -EINVAL; |
| |
| return get_relfile(cmdtp, file_path, file_addr); |
| } |
| |
| /* |
| * Allocates memory for and initializes a pxe_label. This uses malloc, so the |
| * result must be free()'d to reclaim the memory. |
| * |
| * Returns NULL if malloc fails. |
| */ |
| static struct pxe_label *label_create(void) |
| { |
| struct pxe_label *label; |
| |
| label = malloc(sizeof(struct pxe_label)); |
| |
| if (!label) |
| return NULL; |
| |
| memset(label, 0, sizeof(struct pxe_label)); |
| |
| return label; |
| } |
| |
| /* |
| * Free the memory used by a pxe_label, including that used by its name, |
| * kernel, append and initrd members, if they're non NULL. |
| * |
| * So - be sure to only use dynamically allocated memory for the members of |
| * the pxe_label struct, unless you want to clean it up first. These are |
| * currently only created by the pxe file parsing code. |
| */ |
| static void label_destroy(struct pxe_label *label) |
| { |
| if (label->name) |
| free(label->name); |
| |
| if (label->kernel) |
| free(label->kernel); |
| |
| if (label->config) |
| free(label->config); |
| |
| if (label->append) |
| free(label->append); |
| |
| if (label->initrd) |
| free(label->initrd); |
| |
| if (label->fdt) |
| free(label->fdt); |
| |
| if (label->fdtdir) |
| free(label->fdtdir); |
| |
| free(label); |
| } |
| |
| /* |
| * Print a label and its string members if they're defined. |
| * |
| * This is passed as a callback to the menu code for displaying each |
| * menu entry. |
| */ |
| static void label_print(void *data) |
| { |
| struct pxe_label *label = data; |
| const char *c = label->menu ? label->menu : label->name; |
| |
| printf("%s:\t%s\n", label->num, c); |
| } |
| |
| /* |
| * Boot a label that specified 'localboot'. This requires that the 'localcmd' |
| * environment variable is defined. Its contents will be executed as U-Boot |
| * command. If the label specified an 'append' line, its contents will be |
| * used to overwrite the contents of the 'bootargs' environment variable prior |
| * to running 'localcmd'. |
| * |
| * Returns 1 on success or < 0 on error. |
| */ |
| static int label_localboot(struct pxe_label *label) |
| { |
| char *localcmd; |
| |
| localcmd = from_env("localcmd"); |
| |
| if (!localcmd) |
| return -ENOENT; |
| |
| if (label->append) { |
| char bootargs[CONFIG_SYS_CBSIZE]; |
| |
| cli_simple_process_macros(label->append, bootargs); |
| env_set("bootargs", bootargs); |
| } |
| |
| debug("running: %s\n", localcmd); |
| |
| return run_command_list(localcmd, strlen(localcmd), 0); |
| } |
| |
| /* |
| * Boot according to the contents of a pxe_label. |
| * |
| * If we can't boot for any reason, we return. A successful boot never |
| * returns. |
| * |
| * The kernel will be stored in the location given by the 'kernel_addr_r' |
| * environment variable. |
| * |
| * If the label specifies an initrd file, it will be stored in the location |
| * given by the 'ramdisk_addr_r' environment variable. |
| * |
| * If the label specifies an 'append' line, its contents will overwrite that |
| * of the 'bootargs' environment variable. |
| */ |
| static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) |
| { |
| char *bootm_argv[] = { "bootm", NULL, NULL, NULL, NULL }; |
| char initrd_str[28]; |
| char mac_str[29] = ""; |
| char ip_str[68] = ""; |
| char *fit_addr = NULL; |
| int bootm_argc = 2; |
| int len = 0; |
| ulong kernel_addr; |
| void *buf; |
| |
| label_print(label); |
| |
| label->attempted = 1; |
| |
| if (label->localboot) { |
| if (label->localboot_val >= 0) |
| label_localboot(label); |
| return 0; |
| } |
| |
| if (!label->kernel) { |
| printf("No kernel given, skipping %s\n", |
| label->name); |
| return 1; |
| } |
| |
| if (label->initrd) { |
| if (get_relfile_envaddr(cmdtp, label->initrd, "ramdisk_addr_r") < 0) { |
| printf("Skipping %s for failure retrieving initrd\n", |
| label->name); |
| return 1; |
| } |
| |
| bootm_argv[2] = initrd_str; |
| strncpy(bootm_argv[2], env_get("ramdisk_addr_r"), 18); |
| strcat(bootm_argv[2], ":"); |
| strncat(bootm_argv[2], env_get("filesize"), 9); |
| bootm_argc = 3; |
| } |
| |
| if (get_relfile_envaddr(cmdtp, label->kernel, "kernel_addr_r") < 0) { |
| printf("Skipping %s for failure retrieving kernel\n", |
| label->name); |
| return 1; |
| } |
| |
| if (label->ipappend & 0x1) { |
| sprintf(ip_str, " ip=%s:%s:%s:%s", |
| env_get("ipaddr"), env_get("serverip"), |
| env_get("gatewayip"), env_get("netmask")); |
| } |
| |
| #ifdef CONFIG_CMD_NET |
| if (label->ipappend & 0x2) { |
| int err; |
| |
| strcpy(mac_str, " BOOTIF="); |
| err = format_mac_pxe(mac_str + 8, sizeof(mac_str) - 8); |
| if (err < 0) |
| mac_str[0] = '\0'; |
| } |
| #endif |
| |
| if ((label->ipappend & 0x3) || label->append) { |
| char bootargs[CONFIG_SYS_CBSIZE] = ""; |
| char finalbootargs[CONFIG_SYS_CBSIZE]; |
| |
| if (strlen(label->append ?: "") + |
| strlen(ip_str) + strlen(mac_str) + 1 > sizeof(bootargs)) { |
| printf("bootarg overflow %zd+%zd+%zd+1 > %zd\n", |
| strlen(label->append ?: ""), |
| strlen(ip_str), strlen(mac_str), |
| sizeof(bootargs)); |
| return 1; |
| } |
| |
| if (label->append) |
| strncpy(bootargs, label->append, sizeof(bootargs)); |
| |
| strcat(bootargs, ip_str); |
| strcat(bootargs, mac_str); |
| |
| cli_simple_process_macros(bootargs, finalbootargs); |
| env_set("bootargs", finalbootargs); |
| printf("append: %s\n", finalbootargs); |
| } |
| |
| bootm_argv[1] = env_get("kernel_addr_r"); |
| /* for FIT, append the configuration identifier */ |
| if (label->config) { |
| int len = strlen(bootm_argv[1]) + strlen(label->config) + 1; |
| |
| fit_addr = malloc(len); |
| if (!fit_addr) { |
| printf("malloc fail (FIT address)\n"); |
| return 1; |
| } |
| snprintf(fit_addr, len, "%s%s", bootm_argv[1], label->config); |
| bootm_argv[1] = fit_addr; |
| } |
| |
| /* |
| * fdt usage is optional: |
| * It handles the following scenarios. All scenarios are exclusive |
| * |
| * Scenario 1: If fdt_addr_r specified and "fdt" label is defined in |
| * pxe file, retrieve fdt blob from server. Pass fdt_addr_r to bootm, |
| * and adjust argc appropriately. |
| * |
| * Scenario 2: If there is an fdt_addr specified, pass it along to |
| * bootm, and adjust argc appropriately. |
| * |
| * Scenario 3: fdt blob is not available. |
| */ |
| bootm_argv[3] = env_get("fdt_addr_r"); |
| |
| /* if fdt label is defined then get fdt from server */ |
| if (bootm_argv[3]) { |
| char *fdtfile = NULL; |
| char *fdtfilefree = NULL; |
| |
| if (label->fdt) { |
| fdtfile = label->fdt; |
| } else if (label->fdtdir) { |
| char *f1, *f2, *f3, *f4, *slash; |
| |
| f1 = env_get("fdtfile"); |
| if (f1) { |
| f2 = ""; |
| f3 = ""; |
| f4 = ""; |
| } else { |
| /* |
| * For complex cases where this code doesn't |
| * generate the correct filename, the board |
| * code should set $fdtfile during early boot, |
| * or the boot scripts should set $fdtfile |
| * before invoking "pxe" or "sysboot". |
| */ |
| f1 = env_get("soc"); |
| f2 = "-"; |
| f3 = env_get("board"); |
| f4 = ".dtb"; |
| } |
| |
| len = strlen(label->fdtdir); |
| if (!len) |
| slash = "./"; |
| else if (label->fdtdir[len - 1] != '/') |
| slash = "/"; |
| else |
| slash = ""; |
| |
| len = strlen(label->fdtdir) + strlen(slash) + |
| strlen(f1) + strlen(f2) + strlen(f3) + |
| strlen(f4) + 1; |
| fdtfilefree = malloc(len); |
| if (!fdtfilefree) { |
| printf("malloc fail (FDT filename)\n"); |
| goto cleanup; |
| } |
| |
| snprintf(fdtfilefree, len, "%s%s%s%s%s%s", |
| label->fdtdir, slash, f1, f2, f3, f4); |
| fdtfile = fdtfilefree; |
| } |
| |
| if (fdtfile) { |
| int err = get_relfile_envaddr(cmdtp, fdtfile, |
| "fdt_addr_r"); |
| |
| free(fdtfilefree); |
| if (err < 0) { |
| printf("Skipping %s for failure retrieving fdt\n", |
| label->name); |
| goto cleanup; |
| } |
| } else { |
| bootm_argv[3] = NULL; |
| } |
| } |
| |
| if (!bootm_argv[3]) |
| bootm_argv[3] = env_get("fdt_addr"); |
| |
| if (bootm_argv[3]) { |
| if (!bootm_argv[2]) |
| bootm_argv[2] = "-"; |
| bootm_argc = 4; |
| } |
| |
| kernel_addr = genimg_get_kernel_addr(bootm_argv[1]); |
| buf = map_sysmem(kernel_addr, 0); |
| /* Try bootm for legacy and FIT format image */ |
| if (genimg_get_format(buf) != IMAGE_FORMAT_INVALID) |
| do_bootm(cmdtp, 0, bootm_argc, bootm_argv); |
| #ifdef CONFIG_CMD_BOOTI |
| /* Try booting an AArch64 Linux kernel image */ |
| else |
| do_booti(cmdtp, 0, bootm_argc, bootm_argv); |
| #elif defined(CONFIG_CMD_BOOTZ) |
| /* Try booting a Image */ |
| else |
| do_bootz(cmdtp, 0, bootm_argc, bootm_argv); |
| #endif |
| unmap_sysmem(buf); |
| |
| cleanup: |
| if (fit_addr) |
| free(fit_addr); |
| return 1; |
| } |
| |
| /* |
| * Tokens for the pxe file parser. |
| */ |
| enum token_type { |
| T_EOL, |
| T_STRING, |
| T_EOF, |
| T_MENU, |
| T_TITLE, |
| T_TIMEOUT, |
| T_LABEL, |
| T_KERNEL, |
| T_LINUX, |
| T_APPEND, |
| T_INITRD, |
| T_LOCALBOOT, |
| T_DEFAULT, |
| T_PROMPT, |
| T_INCLUDE, |
| T_FDT, |
| T_FDTDIR, |
| T_ONTIMEOUT, |
| T_IPAPPEND, |
| T_BACKGROUND, |
| T_INVALID |
| }; |
| |
| /* |
| * A token - given by a value and a type. |
| */ |
| struct token { |
| char *val; |
| enum token_type type; |
| }; |
| |
| /* |
| * Keywords recognized. |
| */ |
| static const struct token keywords[] = { |
| {"menu", T_MENU}, |
| {"title", T_TITLE}, |
| {"timeout", T_TIMEOUT}, |
| {"default", T_DEFAULT}, |
| {"prompt", T_PROMPT}, |
| {"label", T_LABEL}, |
| {"kernel", T_KERNEL}, |
| {"linux", T_LINUX}, |
| {"localboot", T_LOCALBOOT}, |
| {"append", T_APPEND}, |
| {"initrd", T_INITRD}, |
| {"include", T_INCLUDE}, |
| {"devicetree", T_FDT}, |
| {"fdt", T_FDT}, |
| {"devicetreedir", T_FDTDIR}, |
| {"fdtdir", T_FDTDIR}, |
| {"ontimeout", T_ONTIMEOUT,}, |
| {"ipappend", T_IPAPPEND,}, |
| {"background", T_BACKGROUND,}, |
| {NULL, T_INVALID} |
| }; |
| |
| /* |
| * Since pxe(linux) files don't have a token to identify the start of a |
| * literal, we have to keep track of when we're in a state where a literal is |
| * expected vs when we're in a state a keyword is expected. |
| */ |
| enum lex_state { |
| L_NORMAL = 0, |
| L_KEYWORD, |
| L_SLITERAL |
| }; |
| |
| /* |
| * get_string retrieves a string from *p and stores it as a token in |
| * *t. |
| * |
| * get_string used for scanning both string literals and keywords. |
| * |
| * Characters from *p are copied into t-val until a character equal to |
| * delim is found, or a NUL byte is reached. If delim has the special value of |
| * ' ', any whitespace character will be used as a delimiter. |
| * |
| * If lower is unequal to 0, uppercase characters will be converted to |
| * lowercase in the result. This is useful to make keywords case |
| * insensitive. |
| * |
| * The location of *p is updated to point to the first character after the end |
| * of the token - the ending delimiter. |
| * |
| * On success, the new value of t->val is returned. Memory for t->val is |
| * allocated using malloc and must be free()'d to reclaim it. If insufficient |
| * memory is available, NULL is returned. |
| */ |
| static char *get_string(char **p, struct token *t, char delim, int lower) |
| { |
| char *b, *e; |
| size_t len, i; |
| |
| /* |
| * b and e both start at the beginning of the input stream. |
| * |
| * e is incremented until we find the ending delimiter, or a NUL byte |
| * is reached. Then, we take e - b to find the length of the token. |
| */ |
| b = *p; |
| e = *p; |
| |
| while (*e) { |
| if ((delim == ' ' && isspace(*e)) || delim == *e) |
| break; |
| e++; |
| } |
| |
| len = e - b; |
| |
| /* |
| * Allocate memory to hold the string, and copy it in, converting |
| * characters to lowercase if lower is != 0. |
| */ |
| t->val = malloc(len + 1); |
| if (!t->val) |
| return NULL; |
| |
| for (i = 0; i < len; i++, b++) { |
| if (lower) |
| t->val[i] = tolower(*b); |
| else |
| t->val[i] = *b; |
| } |
| |
| t->val[len] = '\0'; |
| |
| /* |
| * Update *p so the caller knows where to continue scanning. |
| */ |
| *p = e; |
| |
| t->type = T_STRING; |
| |
| return t->val; |
| } |
| |
| /* |
| * Populate a keyword token with a type and value. |
| */ |
| static void get_keyword(struct token *t) |
| { |
| int i; |
| |
| for (i = 0; keywords[i].val; i++) { |
| if (!strcmp(t->val, keywords[i].val)) { |
| t->type = keywords[i].type; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Get the next token. We have to keep track of which state we're in to know |
| * if we're looking to get a string literal or a keyword. |
| * |
| * *p is updated to point at the first character after the current token. |
| */ |
| static void get_token(char **p, struct token *t, enum lex_state state) |
| { |
| char *c = *p; |
| |
| t->type = T_INVALID; |
| |
| /* eat non EOL whitespace */ |
| while (isblank(*c)) |
| c++; |
| |
| /* |
| * eat comments. note that string literals can't begin with #, but |
| * can contain a # after their first character. |
| */ |
| if (*c == '#') { |
| while (*c && *c != '\n') |
| c++; |
| } |
| |
| if (*c == '\n') { |
| t->type = T_EOL; |
| c++; |
| } else if (*c == '\0') { |
| t->type = T_EOF; |
| c++; |
| } else if (state == L_SLITERAL) { |
| get_string(&c, t, '\n', 0); |
| } else if (state == L_KEYWORD) { |
| /* |
| * when we expect a keyword, we first get the next string |
| * token delimited by whitespace, and then check if it |
| * matches a keyword in our keyword list. if it does, it's |
| * converted to a keyword token of the appropriate type, and |
| * if not, it remains a string token. |
| */ |
| get_string(&c, t, ' ', 1); |
| get_keyword(t); |
| } |
| |
| *p = c; |
| } |
| |
| /* |
| * Increment *c until we get to the end of the current line, or EOF. |
| */ |
| static void eol_or_eof(char **c) |
| { |
| while (**c && **c != '\n') |
| (*c)++; |
| } |
| |
| /* |
| * All of these parse_* functions share some common behavior. |
| * |
| * They finish with *c pointing after the token they parse, and return 1 on |
| * success, or < 0 on error. |
| */ |
| |
| /* |
| * Parse a string literal and store a pointer it at *dst. String literals |
| * terminate at the end of the line. |
| */ |
| static int parse_sliteral(char **c, char **dst) |
| { |
| struct token t; |
| char *s = *c; |
| |
| get_token(c, &t, L_SLITERAL); |
| |
| if (t.type != T_STRING) { |
| printf("Expected string literal: %.*s\n", (int)(*c - s), s); |
| return -EINVAL; |
| } |
| |
| *dst = t.val; |
| |
| return 1; |
| } |
| |
| /* |
| * Parse a base 10 (unsigned) integer and store it at *dst. |
| */ |
| static int parse_integer(char **c, int *dst) |
| { |
| struct token t; |
| char *s = *c; |
| |
| get_token(c, &t, L_SLITERAL); |
| |
| if (t.type != T_STRING) { |
| printf("Expected string: %.*s\n", (int)(*c - s), s); |
| return -EINVAL; |
| } |
| |
| *dst = simple_strtol(t.val, NULL, 10); |
| |
| free(t.val); |
| |
| return 1; |
| } |
| |
| static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base, |
| struct pxe_menu *cfg, int nest_level); |
| |
| /* |
| * Parse an include statement, and retrieve and parse the file it mentions. |
| * |
| * base should point to a location where it's safe to store the file, and |
| * nest_level should indicate how many nested includes have occurred. For this |
| * include, nest_level has already been incremented and doesn't need to be |
| * incremented here. |
| */ |
| static int handle_include(cmd_tbl_t *cmdtp, char **c, unsigned long base, |
| struct pxe_menu *cfg, int nest_level) |
| { |
| char *include_path; |
| char *s = *c; |
| int err; |
| char *buf; |
| int ret; |
| |
| err = parse_sliteral(c, &include_path); |
| |
| if (err < 0) { |
| printf("Expected include path: %.*s\n", (int)(*c - s), s); |
| return err; |
| } |
| |
| err = get_pxe_file(cmdtp, include_path, base); |
| |
| if (err < 0) { |
| printf("Couldn't retrieve %s\n", include_path); |
| return err; |
| } |
| |
| buf = map_sysmem(base, 0); |
| ret = parse_pxefile_top(cmdtp, buf, base, cfg, nest_level); |
| unmap_sysmem(buf); |
| |
| return ret; |
| } |
| |
| /* |
| * Parse lines that begin with 'menu'. |
| * |
| * base and nest are provided to handle the 'menu include' case. |
| * |
| * base should point to a location where it's safe to store the included file. |
| * |
| * nest_level should be 1 when parsing the top level pxe file, 2 when parsing |
| * a file it includes, 3 when parsing a file included by that file, and so on. |
| */ |
| static int parse_menu(cmd_tbl_t *cmdtp, char **c, struct pxe_menu *cfg, |
| unsigned long base, int nest_level) |
| { |
| struct token t; |
| char *s = *c; |
| int err = 0; |
| |
| get_token(c, &t, L_KEYWORD); |
| |
| switch (t.type) { |
| case T_TITLE: |
| err = parse_sliteral(c, &cfg->title); |
| |
| break; |
| |
| case T_INCLUDE: |
| err = handle_include(cmdtp, c, base, cfg, nest_level + 1); |
| break; |
| |
| case T_BACKGROUND: |
| err = parse_sliteral(c, &cfg->bmp); |
| break; |
| |
| default: |
| printf("Ignoring malformed menu command: %.*s\n", |
| (int)(*c - s), s); |
| } |
| |
| if (err < 0) |
| return err; |
| |
| eol_or_eof(c); |
| |
| return 1; |
| } |
| |
| /* |
| * Handles parsing a 'menu line' when we're parsing a label. |
| */ |
| static int parse_label_menu(char **c, struct pxe_menu *cfg, |
| struct pxe_label *label) |
| { |
| struct token t; |
| char *s; |
| |
| s = *c; |
| |
| get_token(c, &t, L_KEYWORD); |
| |
| switch (t.type) { |
| case T_DEFAULT: |
| if (!cfg->default_label) |
| cfg->default_label = strdup(label->name); |
| |
| if (!cfg->default_label) |
| return -ENOMEM; |
| |
| break; |
| case T_LABEL: |
| parse_sliteral(c, &label->menu); |
| break; |
| default: |
| printf("Ignoring malformed menu command: %.*s\n", |
| (int)(*c - s), s); |
| } |
| |
| eol_or_eof(c); |
| |
| return 0; |
| } |
| |
| /* |
| * Handles parsing a 'kernel' label. |
| * expecting "filename" or "<fit_filename>#cfg" |
| */ |
| static int parse_label_kernel(char **c, struct pxe_label *label) |
| { |
| char *s; |
| int err; |
| |
| err = parse_sliteral(c, &label->kernel); |
| if (err < 0) |
| return err; |
| |
| s = strstr(label->kernel, "#"); |
| if (!s) |
| return 1; |
| |
| label->config = malloc(strlen(s) + 1); |
| if (!label->config) |
| return -ENOMEM; |
| |
| strcpy(label->config, s); |
| *s = 0; |
| |
| return 1; |
| } |
| |
| /* |
| * Parses a label and adds it to the list of labels for a menu. |
| * |
| * A label ends when we either get to the end of a file, or |
| * get some input we otherwise don't have a handler defined |
| * for. |
| * |
| */ |
| static int parse_label(char **c, struct pxe_menu *cfg) |
| { |
| struct token t; |
| int len; |
| char *s = *c; |
| struct pxe_label *label; |
| int err; |
| |
| label = label_create(); |
| if (!label) |
| return -ENOMEM; |
| |
| err = parse_sliteral(c, &label->name); |
| if (err < 0) { |
| printf("Expected label name: %.*s\n", (int)(*c - s), s); |
| label_destroy(label); |
| return -EINVAL; |
| } |
| |
| list_add_tail(&label->list, &cfg->labels); |
| |
| while (1) { |
| s = *c; |
| get_token(c, &t, L_KEYWORD); |
| |
| err = 0; |
| switch (t.type) { |
| case T_MENU: |
| err = parse_label_menu(c, cfg, label); |
| break; |
| |
| case T_KERNEL: |
| case T_LINUX: |
| err = parse_label_kernel(c, label); |
| break; |
| |
| case T_APPEND: |
| err = parse_sliteral(c, &label->append); |
| if (label->initrd) |
| break; |
| s = strstr(label->append, "initrd="); |
| if (!s) |
| break; |
| s += 7; |
| len = (int)(strchr(s, ' ') - s); |
| label->initrd = malloc(len + 1); |
| strncpy(label->initrd, s, len); |
| label->initrd[len] = '\0'; |
| |
| break; |
| |
| case T_INITRD: |
| if (!label->initrd) |
| err = parse_sliteral(c, &label->initrd); |
| break; |
| |
| case T_FDT: |
| if (!label->fdt) |
| err = parse_sliteral(c, &label->fdt); |
| break; |
| |
| case T_FDTDIR: |
| if (!label->fdtdir) |
| err = parse_sliteral(c, &label->fdtdir); |
| break; |
| |
| case T_LOCALBOOT: |
| label->localboot = 1; |
| err = parse_integer(c, &label->localboot_val); |
| break; |
| |
| case T_IPAPPEND: |
| err = parse_integer(c, &label->ipappend); |
| break; |
| |
| case T_EOL: |
| break; |
| |
| default: |
| /* |
| * put the token back! we don't want it - it's the end |
| * of a label and whatever token this is, it's |
| * something for the menu level context to handle. |
| */ |
| *c = s; |
| return 1; |
| } |
| |
| if (err < 0) |
| return err; |
| } |
| } |
| |
| /* |
| * This 16 comes from the limit pxelinux imposes on nested includes. |
| * |
| * There is no reason at all we couldn't do more, but some limit helps prevent |
| * infinite (until crash occurs) recursion if a file tries to include itself. |
| */ |
| #define MAX_NEST_LEVEL 16 |
| |
| /* |
| * Entry point for parsing a menu file. nest_level indicates how many times |
| * we've nested in includes. It will be 1 for the top level menu file. |
| * |
| * Returns 1 on success, < 0 on error. |
| */ |
| static int parse_pxefile_top(cmd_tbl_t *cmdtp, char *p, unsigned long base, |
| struct pxe_menu *cfg, int nest_level) |
| { |
| struct token t; |
| char *s, *b, *label_name; |
| int err; |
| |
| b = p; |
| |
| if (nest_level > MAX_NEST_LEVEL) { |
| printf("Maximum nesting (%d) exceeded\n", MAX_NEST_LEVEL); |
| return -EMLINK; |
| } |
| |
| while (1) { |
| s = p; |
| |
| get_token(&p, &t, L_KEYWORD); |
| |
| err = 0; |
| switch (t.type) { |
| case T_MENU: |
| cfg->prompt = 1; |
| err = parse_menu(cmdtp, &p, cfg, |
| base + ALIGN(strlen(b) + 1, 4), |
| nest_level); |
| break; |
| |
| case T_TIMEOUT: |
| err = parse_integer(&p, &cfg->timeout); |
| break; |
| |
| case T_LABEL: |
| err = parse_label(&p, cfg); |
| break; |
| |
| case T_DEFAULT: |
| case T_ONTIMEOUT: |
| err = parse_sliteral(&p, &label_name); |
| |
| if (label_name) { |
| if (cfg->default_label) |
| free(cfg->default_label); |
| |
| cfg->default_label = label_name; |
| } |
| |
| break; |
| |
| case T_INCLUDE: |
| err = handle_include(cmdtp, &p, |
| base + ALIGN(strlen(b), 4), cfg, |
| nest_level + 1); |
| break; |
| |
| case T_PROMPT: |
| eol_or_eof(&p); |
| break; |
| |
| case T_EOL: |
| break; |
| |
| case T_EOF: |
| return 1; |
| |
| default: |
| printf("Ignoring unknown command: %.*s\n", |
| (int)(p - s), s); |
| eol_or_eof(&p); |
| } |
| |
| if (err < 0) |
| return err; |
| } |
| } |
| |
| /* |
| * Free the memory used by a pxe_menu and its labels. |
| */ |
| void destroy_pxe_menu(struct pxe_menu *cfg) |
| { |
| struct list_head *pos, *n; |
| struct pxe_label *label; |
| |
| if (cfg->title) |
| free(cfg->title); |
| |
| if (cfg->default_label) |
| free(cfg->default_label); |
| |
| list_for_each_safe(pos, n, &cfg->labels) { |
| label = list_entry(pos, struct pxe_label, list); |
| |
| label_destroy(label); |
| } |
| |
| free(cfg); |
| } |
| |
| /* |
| * Entry point for parsing a pxe file. This is only used for the top level |
| * file. |
| * |
| * Returns NULL if there is an error, otherwise, returns a pointer to a |
| * pxe_menu struct populated with the results of parsing the pxe file (and any |
| * files it includes). The resulting pxe_menu struct can be free()'d by using |
| * the destroy_pxe_menu() function. |
| */ |
| struct pxe_menu *parse_pxefile(cmd_tbl_t *cmdtp, unsigned long menucfg) |
| { |
| struct pxe_menu *cfg; |
| char *buf; |
| int r; |
| |
| cfg = malloc(sizeof(struct pxe_menu)); |
| |
| if (!cfg) |
| return NULL; |
| |
| memset(cfg, 0, sizeof(struct pxe_menu)); |
| |
| INIT_LIST_HEAD(&cfg->labels); |
| |
| buf = map_sysmem(menucfg, 0); |
| r = parse_pxefile_top(cmdtp, buf, menucfg, cfg, 1); |
| unmap_sysmem(buf); |
| |
| if (r < 0) { |
| destroy_pxe_menu(cfg); |
| return NULL; |
| } |
| |
| return cfg; |
| } |
| |
| /* |
| * Converts a pxe_menu struct into a menu struct for use with U-Boot's generic |
| * menu code. |
| */ |
| static struct menu *pxe_menu_to_menu(struct pxe_menu *cfg) |
| { |
| struct pxe_label *label; |
| struct list_head *pos; |
| struct menu *m; |
| int err; |
| int i = 1; |
| char *default_num = NULL; |
| |
| /* |
| * Create a menu and add items for all the labels. |
| */ |
| m = menu_create(cfg->title, DIV_ROUND_UP(cfg->timeout, 10), |
| cfg->prompt, label_print, NULL, NULL); |
| |
| if (!m) |
| return NULL; |
| |
| list_for_each(pos, &cfg->labels) { |
| label = list_entry(pos, struct pxe_label, list); |
| |
| sprintf(label->num, "%d", i++); |
| if (menu_item_add(m, label->num, label) != 1) { |
| menu_destroy(m); |
| return NULL; |
| } |
| if (cfg->default_label && |
| (strcmp(label->name, cfg->default_label) == 0)) |
| default_num = label->num; |
| } |
| |
| /* |
| * After we've created items for each label in the menu, set the |
| * menu's default label if one was specified. |
| */ |
| if (default_num) { |
| err = menu_default_set(m, default_num); |
| if (err != 1) { |
| if (err != -ENOENT) { |
| menu_destroy(m); |
| return NULL; |
| } |
| |
| printf("Missing default: %s\n", cfg->default_label); |
| } |
| } |
| |
| return m; |
| } |
| |
| /* |
| * Try to boot any labels we have yet to attempt to boot. |
| */ |
| static void boot_unattempted_labels(cmd_tbl_t *cmdtp, struct pxe_menu *cfg) |
| { |
| struct list_head *pos; |
| struct pxe_label *label; |
| |
| list_for_each(pos, &cfg->labels) { |
| label = list_entry(pos, struct pxe_label, list); |
| |
| if (!label->attempted) |
| label_boot(cmdtp, label); |
| } |
| } |
| |
| /* |
| * Boot the system as prescribed by a pxe_menu. |
| * |
| * Use the menu system to either get the user's choice or the default, based |
| * on config or user input. If there is no default or user's choice, |
| * attempted to boot labels in the order they were given in pxe files. |
| * If the default or user's choice fails to boot, attempt to boot other |
| * labels in the order they were given in pxe files. |
| * |
| * If this function returns, there weren't any labels that successfully |
| * booted, or the user interrupted the menu selection via ctrl+c. |
| */ |
| void handle_pxe_menu(cmd_tbl_t *cmdtp, struct pxe_menu *cfg) |
| { |
| void *choice; |
| struct menu *m; |
| int err; |
| |
| #ifdef CONFIG_CMD_BMP |
| /* display BMP if available */ |
| if (cfg->bmp) { |
| if (get_relfile(cmdtp, cfg->bmp, load_addr)) { |
| run_command("cls", 0); |
| bmp_display(load_addr, |
| BMP_ALIGN_CENTER, BMP_ALIGN_CENTER); |
| } else { |
| printf("Skipping background bmp %s for failure\n", |
| cfg->bmp); |
| } |
| } |
| #endif |
| |
| m = pxe_menu_to_menu(cfg); |
| if (!m) |
| return; |
| |
| err = menu_get_choice(m, &choice); |
| |
| menu_destroy(m); |
| |
| /* |
| * err == 1 means we got a choice back from menu_get_choice. |
| * |
| * err == -ENOENT if the menu was setup to select the default but no |
| * default was set. in that case, we should continue trying to boot |
| * labels that haven't been attempted yet. |
| * |
| * otherwise, the user interrupted or there was some other error and |
| * we give up. |
| */ |
| |
| if (err == 1) { |
| err = label_boot(cmdtp, choice); |
| if (!err) |
| return; |
| } else if (err != -ENOENT) { |
| return; |
| } |
| |
| boot_unattempted_labels(cmdtp, cfg); |
| } |