| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * Shengzhou Liu <Shengzhou.Liu@freescale.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <netdev.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_law.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_portals.h> |
| #include <asm/fsl_liodn.h> |
| #include <malloc.h> |
| #include <fm_eth.h> |
| #include <fsl_mdio.h> |
| #include <miiphy.h> |
| #include <phy.h> |
| #include <asm/fsl_dtsec.h> |
| #include <asm/fsl_serdes.h> |
| #include "../common/qixis.h" |
| #include "../common/fman.h" |
| #include "t2080qds_qixis.h" |
| |
| #define EMI_NONE 0xFFFFFFFF |
| #define EMI1_RGMII1 0 |
| #define EMI1_RGMII2 1 |
| #define EMI1_SLOT1 2 |
| #define EMI1_SLOT2 6 |
| #define EMI1_SLOT3 3 |
| #define EMI1_SLOT4 4 |
| #define EMI1_SLOT5 5 |
| #define EMI2 7 |
| |
| static int mdio_mux[NUM_FM_PORTS]; |
| |
| static const char * const mdio_names[] = { |
| "T2080QDS_MDIO_RGMII1", |
| "T2080QDS_MDIO_RGMII2", |
| "T2080QDS_MDIO_SLOT1", |
| "T2080QDS_MDIO_SLOT3", |
| "T2080QDS_MDIO_SLOT4", |
| "T2080QDS_MDIO_SLOT5", |
| "T2080QDS_MDIO_SLOT2", |
| "T2080QDS_MDIO_10GC", |
| }; |
| |
| /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */ |
| static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1}; |
| |
| static const char *T2080qds_mdio_name_for_muxval(u8 muxval) |
| { |
| return mdio_names[muxval]; |
| } |
| |
| struct mii_dev *mii_dev_for_muxval(u8 muxval) |
| { |
| struct mii_dev *bus; |
| const char *name = T2080qds_mdio_name_for_muxval(muxval); |
| |
| if (!name) { |
| printf("No bus for muxval %x\n", muxval); |
| return NULL; |
| } |
| |
| bus = miiphy_get_dev_by_name(name); |
| |
| if (!bus) { |
| printf("No bus by name %s\n", name); |
| return NULL; |
| } |
| |
| return bus; |
| } |
| |
| struct T2080qds_mdio { |
| u8 muxval; |
| struct mii_dev *realbus; |
| }; |
| |
| static void T2080qds_mux_mdio(u8 muxval) |
| { |
| u8 brdcfg4; |
| if (muxval < 7) { |
| brdcfg4 = QIXIS_READ(brdcfg[4]); |
| brdcfg4 &= ~BRDCFG4_EMISEL_MASK; |
| brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); |
| QIXIS_WRITE(brdcfg[4], brdcfg4); |
| } |
| } |
| |
| static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad, |
| int regnum) |
| { |
| struct T2080qds_mdio *priv = bus->priv; |
| |
| T2080qds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->read(priv->realbus, addr, devad, regnum); |
| } |
| |
| static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad, |
| int regnum, u16 value) |
| { |
| struct T2080qds_mdio *priv = bus->priv; |
| |
| T2080qds_mux_mdio(priv->muxval); |
| |
| return priv->realbus->write(priv->realbus, addr, devad, regnum, value); |
| } |
| |
| static int T2080qds_mdio_reset(struct mii_dev *bus) |
| { |
| struct T2080qds_mdio *priv = bus->priv; |
| |
| return priv->realbus->reset(priv->realbus); |
| } |
| |
| static int T2080qds_mdio_init(char *realbusname, u8 muxval) |
| { |
| struct T2080qds_mdio *pmdio; |
| struct mii_dev *bus = mdio_alloc(); |
| |
| if (!bus) { |
| printf("Failed to allocate T2080QDS MDIO bus\n"); |
| return -1; |
| } |
| |
| pmdio = malloc(sizeof(*pmdio)); |
| if (!pmdio) { |
| printf("Failed to allocate T2080QDS private data\n"); |
| free(bus); |
| return -1; |
| } |
| |
| bus->read = T2080qds_mdio_read; |
| bus->write = T2080qds_mdio_write; |
| bus->reset = T2080qds_mdio_reset; |
| sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval)); |
| |
| pmdio->realbus = miiphy_get_dev_by_name(realbusname); |
| |
| if (!pmdio->realbus) { |
| printf("No bus with name %s\n", realbusname); |
| free(bus); |
| free(pmdio); |
| return -1; |
| } |
| |
| pmdio->muxval = muxval; |
| bus->priv = pmdio; |
| |
| return mdio_register(bus); |
| } |
| |
| void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, |
| enum fm_port port, int offset) |
| { |
| int phy; |
| char alias[20]; |
| struct fixed_link f_link; |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 srds_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS1_PRTCL; |
| |
| srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| |
| if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { |
| phy = fm_info_get_phy_address(port); |
| switch (port) { |
| case FM1_DTSEC1: |
| case FM1_DTSEC2: |
| case FM1_DTSEC9: |
| case FM1_DTSEC10: |
| sprintf(alias, "phy_sgmii_s3_%x", phy); |
| fdt_set_phy_handle(fdt, compat, addr, alias); |
| fdt_status_okay_by_alias(fdt, "emi1_slot3"); |
| break; |
| case FM1_DTSEC5: |
| case FM1_DTSEC6: |
| if (mdio_mux[port] == EMI1_SLOT1) { |
| sprintf(alias, "phy_sgmii_s1_%x", phy); |
| fdt_set_phy_handle(fdt, compat, addr, alias); |
| fdt_status_okay_by_alias(fdt, "emi1_slot1"); |
| } else if (mdio_mux[port] == EMI1_SLOT2) { |
| sprintf(alias, "phy_sgmii_s2_%x", phy); |
| fdt_set_phy_handle(fdt, compat, addr, alias); |
| fdt_status_okay_by_alias(fdt, "emi1_slot2"); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) { |
| switch (srds_s1) { |
| case 0x66: /* XFI interface */ |
| case 0x6b: |
| case 0x6c: |
| case 0x6d: |
| case 0x71: |
| f_link.phy_id = port; |
| f_link.duplex = 1; |
| f_link.link_speed = 10000; |
| f_link.pause = 0; |
| f_link.asym_pause = 0; |
| /* no PHY for XFI */ |
| fdt_delprop(fdt, offset, "phy-handle"); |
| fdt_setprop(fdt, offset, "fixed-link", &f_link, |
| sizeof(f_link)); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| void fdt_fixup_board_enet(void *fdt) |
| { |
| return; |
| } |
| |
| /* |
| * This function reads RCW to check if Serdes1{E,F,G,H} is configured |
| * as slot 1/2/3 and update the lane_to_slot[] array accordingly |
| */ |
| static void initialize_lane_to_slot(void) |
| { |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 srds_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS1_PRTCL; |
| |
| srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| |
| switch (srds_s1) { |
| case 0x51: |
| case 0x5f: |
| case 0x65: |
| case 0x6b: |
| case 0x71: |
| lane_to_slot[5] = 2; |
| lane_to_slot[6] = 2; |
| lane_to_slot[7] = 2; |
| break; |
| case 0xa6: |
| case 0x8e: |
| case 0x8f: |
| case 0x82: |
| case 0x83: |
| case 0xd3: |
| case 0xd9: |
| case 0xcb: |
| lane_to_slot[6] = 2; |
| lane_to_slot[7] = 2; |
| break; |
| case 0xda: |
| lane_to_slot[4] = 3; |
| lane_to_slot[5] = 3; |
| lane_to_slot[6] = 3; |
| lane_to_slot[7] = 3; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| int board_eth_init(bd_t *bis) |
| { |
| #if defined(CONFIG_FMAN_ENET) |
| int i, idx, lane, slot, interface; |
| struct memac_mdio_info dtsec_mdio_info; |
| struct memac_mdio_info tgec_mdio_info; |
| ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); |
| u32 rcwsr13 = in_be32(&gur->rcwsr[13]); |
| u32 srds_s1; |
| |
| srds_s1 = in_be32(&gur->rcwsr[4]) & |
| FSL_CORENET2_RCWSR4_SRDS1_PRTCL; |
| srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; |
| |
| initialize_lane_to_slot(); |
| |
| /* Initialize the mdio_mux array so we can recognize empty elements */ |
| for (i = 0; i < NUM_FM_PORTS; i++) |
| mdio_mux[i] = EMI_NONE; |
| |
| dtsec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; |
| |
| dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; |
| |
| /* Register the 1G MDIO bus */ |
| fm_memac_mdio_init(bis, &dtsec_mdio_info); |
| |
| tgec_mdio_info.regs = |
| (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; |
| tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; |
| |
| /* Register the 10G MDIO bus */ |
| fm_memac_mdio_init(bis, &tgec_mdio_info); |
| |
| /* Register the muxing front-ends to the MDIO buses */ |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); |
| T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); |
| T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); |
| |
| /* Set the two on-board RGMII PHY address */ |
| fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); |
| if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == |
| FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII) |
| fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); |
| else |
| fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR); |
| |
| switch (srds_s1) { |
| case 0x1c: |
| case 0x95: |
| case 0xa2: |
| case 0x94: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); |
| break; |
| case 0x51: |
| case 0x5f: |
| case 0x65: |
| /* XAUI/HiGig in Slot3 */ |
| fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); |
| break; |
| case 0x66: |
| /* |
| * XFI does not need a PHY to work, but to avoid U-boot use |
| * default PHY address which is zero to a MAC when it found |
| * a MAC has no PHY address, we give a PHY address to XFI |
| * MAC, and should not use a real XAUI PHY address, since |
| * MDIO can access it successfully, and then MDIO thinks |
| * the XAUI card is used for the XFI MAC, which will cause |
| * error. |
| */ |
| fm_info_set_phy_address(FM1_10GEC1, 4); |
| fm_info_set_phy_address(FM1_10GEC2, 5); |
| fm_info_set_phy_address(FM1_10GEC3, 6); |
| fm_info_set_phy_address(FM1_10GEC4, 7); |
| break; |
| case 0x6b: |
| fm_info_set_phy_address(FM1_10GEC1, 4); |
| fm_info_set_phy_address(FM1_10GEC2, 5); |
| fm_info_set_phy_address(FM1_10GEC3, 6); |
| fm_info_set_phy_address(FM1_10GEC4, 7); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); |
| break; |
| case 0x6c: |
| case 0x6d: |
| fm_info_set_phy_address(FM1_10GEC1, 4); |
| fm_info_set_phy_address(FM1_10GEC2, 5); |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| break; |
| case 0x71: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); |
| break; |
| case 0xa6: |
| case 0x8e: |
| case 0x8f: |
| case 0x82: |
| case 0x83: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); |
| break; |
| case 0xa4: |
| case 0x96: |
| case 0x8a: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| break; |
| case 0xd9: |
| case 0xd3: |
| case 0xcb: |
| /* SGMII in Slot3 */ |
| fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); |
| /* SGMII in Slot2 */ |
| fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); |
| fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); |
| break; |
| default: |
| break; |
| } |
| |
| for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { |
| idx = i - FM1_DTSEC1; |
| interface = fm_info_get_enet_if(i); |
| switch (interface) { |
| case PHY_INTERFACE_MODE_SGMII: |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| SGMII_FM1_DTSEC1 + idx); |
| if (lane < 0) |
| break; |
| slot = lane_to_slot[lane]; |
| debug("FM1@DTSEC%u expects SGMII in slot %u\n", |
| idx + 1, slot); |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| |
| switch (slot) { |
| case 1: |
| mdio_mux[i] = EMI1_SLOT1; |
| fm_info_set_mdio(i, mii_dev_for_muxval( |
| mdio_mux[i])); |
| break; |
| case 2: |
| mdio_mux[i] = EMI1_SLOT2; |
| fm_info_set_mdio(i, mii_dev_for_muxval( |
| mdio_mux[i])); |
| break; |
| case 3: |
| mdio_mux[i] = EMI1_SLOT3; |
| fm_info_set_mdio(i, mii_dev_for_muxval( |
| mdio_mux[i])); |
| break; |
| } |
| break; |
| case PHY_INTERFACE_MODE_RGMII: |
| if (i == FM1_DTSEC3) |
| mdio_mux[i] = EMI1_RGMII1; |
| else if (i == FM1_DTSEC4 || FM1_DTSEC10) |
| mdio_mux[i] = EMI1_RGMII2; |
| fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { |
| idx = i - FM1_10GEC1; |
| switch (fm_info_get_enet_if(i)) { |
| case PHY_INTERFACE_MODE_XGMII: |
| if (srds_s1 == 0x51) { |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| XAUI_FM1_MAC9 + idx); |
| } else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) { |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| HIGIG_FM1_MAC9 + idx); |
| } else { |
| if (i == FM1_10GEC1 || i == FM1_10GEC2) |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| XFI_FM1_MAC9 + idx); |
| else |
| lane = serdes_get_first_lane(FSL_SRDS_1, |
| XFI_FM1_MAC1 + idx); |
| } |
| |
| if (lane < 0) |
| break; |
| mdio_mux[i] = EMI2; |
| fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); |
| |
| if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) || |
| (srds_s1 == 0x6c) || (srds_s1 == 0x6d) || |
| (srds_s1 == 0x71)) { |
| /* As XFI is in cage intead of a slot, so |
| * ensure doesn't disable the corresponding port |
| */ |
| break; |
| } |
| |
| slot = lane_to_slot[lane]; |
| if (QIXIS_READ(present2) & (1 << (slot - 1))) |
| fm_disable_port(i); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| cpu_eth_init(bis); |
| #endif /* CONFIG_FMAN_ENET */ |
| |
| return pci_eth_init(bis); |
| } |