| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <bootm.h> |
| #include <common.h> |
| #include <netdev.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/crm_regs.h> |
| #include <imx_thermal.h> |
| #include <ipu_pixfmt.h> |
| #include <thermal.h> |
| #include <sata.h> |
| |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) |
| static u32 reset_cause = -1; |
| |
| static char *get_reset_cause(void) |
| { |
| u32 cause; |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| |
| cause = readl(&src_regs->srsr); |
| writel(cause, &src_regs->srsr); |
| reset_cause = cause; |
| |
| switch (cause) { |
| case 0x00001: |
| case 0x00011: |
| return "POR"; |
| case 0x00004: |
| return "CSU"; |
| case 0x00008: |
| return "IPP USER"; |
| case 0x00010: |
| #ifdef CONFIG_MX7 |
| return "WDOG1"; |
| #else |
| return "WDOG"; |
| #endif |
| case 0x00020: |
| return "JTAG HIGH-Z"; |
| case 0x00040: |
| return "JTAG SW"; |
| case 0x00080: |
| return "WDOG3"; |
| #ifdef CONFIG_MX7 |
| case 0x00100: |
| return "WDOG4"; |
| case 0x00200: |
| return "TEMPSENSE"; |
| #else |
| case 0x00100: |
| return "TEMPSENSE"; |
| case 0x10000: |
| return "WARM BOOT"; |
| #endif |
| default: |
| return "unknown reset"; |
| } |
| } |
| |
| u32 get_imx_reset_cause(void) |
| { |
| return reset_cause; |
| } |
| #endif |
| |
| #if defined(CONFIG_MX53) || defined(CONFIG_MX6) |
| #if defined(CONFIG_MX53) |
| #define MEMCTL_BASE ESDCTL_BASE_ADDR |
| #else |
| #define MEMCTL_BASE MMDC_P0_BASE_ADDR |
| #endif |
| static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9}; |
| static const unsigned char bank_lookup[] = {3, 2}; |
| |
| /* these MMDC registers are common to the IMX53 and IMX6 */ |
| struct esd_mmdc_regs { |
| uint32_t ctl; |
| uint32_t pdc; |
| uint32_t otc; |
| uint32_t cfg0; |
| uint32_t cfg1; |
| uint32_t cfg2; |
| uint32_t misc; |
| }; |
| |
| #define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7) |
| #define ESD_MMDC_CTL_GET_COLUMN(mdctl) ((ctl >> 20) & 7) |
| #define ESD_MMDC_CTL_GET_WIDTH(mdctl) ((ctl >> 16) & 3) |
| #define ESD_MMDC_CTL_GET_CS1(mdctl) ((ctl >> 30) & 1) |
| #define ESD_MMDC_MISC_GET_BANK(mdmisc) ((misc >> 5) & 1) |
| |
| /* |
| * imx_ddr_size - return size in bytes of DRAM according MMDC config |
| * The MMDC MDCTL register holds the number of bits for row, col, and data |
| * width and the MMDC MDMISC register holds the number of banks. Combine |
| * all these bits to determine the meme size the MMDC has been configured for |
| */ |
| unsigned imx_ddr_size(void) |
| { |
| struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE; |
| unsigned ctl = readl(&mem->ctl); |
| unsigned misc = readl(&mem->misc); |
| int bits = 11 + 0 + 0 + 1; /* row + col + bank + width */ |
| |
| bits += ESD_MMDC_CTL_GET_ROW(ctl); |
| bits += col_lookup[ESD_MMDC_CTL_GET_COLUMN(ctl)]; |
| bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)]; |
| bits += ESD_MMDC_CTL_GET_WIDTH(ctl); |
| bits += ESD_MMDC_CTL_GET_CS1(ctl); |
| |
| /* The MX6 can do only 3840 MiB of DRAM */ |
| if (bits == 32) |
| return 0xf0000000; |
| |
| return 1 << bits; |
| } |
| #endif |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) |
| |
| const char *get_imx_type(u32 imxtype) |
| { |
| switch (imxtype) { |
| case MXC_CPU_MX7S: |
| return "7S"; /* Single-core version of the mx7 */ |
| case MXC_CPU_MX7D: |
| return "7D"; /* Dual-core version of the mx7 */ |
| case MXC_CPU_MX6QP: |
| return "6QP"; /* Quad-Plus version of the mx6 */ |
| case MXC_CPU_MX6DP: |
| return "6DP"; /* Dual-Plus version of the mx6 */ |
| case MXC_CPU_MX6Q: |
| return "6Q"; /* Quad-core version of the mx6 */ |
| case MXC_CPU_MX6D: |
| return "6D"; /* Dual-core version of the mx6 */ |
| case MXC_CPU_MX6DL: |
| return "6DL"; /* Dual Lite version of the mx6 */ |
| case MXC_CPU_MX6SOLO: |
| return "6SOLO"; /* Solo version of the mx6 */ |
| case MXC_CPU_MX6SL: |
| return "6SL"; /* Solo-Lite version of the mx6 */ |
| case MXC_CPU_MX6SLL: |
| return "6SLL"; /* SLL version of the mx6 */ |
| case MXC_CPU_MX6SX: |
| return "6SX"; /* SoloX version of the mx6 */ |
| case MXC_CPU_MX6UL: |
| return "6UL"; /* Ultra-Lite version of the mx6 */ |
| case MXC_CPU_MX6ULL: |
| return "6ULL"; /* ULL version of the mx6 */ |
| case MXC_CPU_MX51: |
| return "51"; |
| case MXC_CPU_MX53: |
| return "53"; |
| default: |
| return "??"; |
| } |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| __maybe_unused u32 max_freq; |
| |
| cpurev = get_cpu_rev(); |
| |
| #if defined(CONFIG_IMX_THERMAL) |
| struct udevice *thermal_dev; |
| int cpu_tmp, minc, maxc, ret; |
| |
| printf("CPU: Freescale i.MX%s rev%d.%d", |
| get_imx_type((cpurev & 0xFF000) >> 12), |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0); |
| max_freq = get_cpu_speed_grade_hz(); |
| if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) { |
| printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| } else { |
| printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| } |
| #else |
| printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", |
| get_imx_type((cpurev & 0xFF000) >> 12), |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| #endif |
| |
| #if defined(CONFIG_IMX_THERMAL) |
| puts("CPU: "); |
| switch (get_cpu_temp_grade(&minc, &maxc)) { |
| case TEMP_AUTOMOTIVE: |
| puts("Automotive temperature grade "); |
| break; |
| case TEMP_INDUSTRIAL: |
| puts("Industrial temperature grade "); |
| break; |
| case TEMP_EXTCOMMERCIAL: |
| puts("Extended Commercial temperature grade "); |
| break; |
| default: |
| puts("Commercial temperature grade "); |
| break; |
| } |
| printf("(%dC to %dC)", minc, maxc); |
| ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); |
| if (!ret) { |
| ret = thermal_get_temp(thermal_dev, &cpu_tmp); |
| |
| if (!ret) |
| printf(" at %dC\n", cpu_tmp); |
| else |
| debug(" - invalid sensor data\n"); |
| } else { |
| debug(" - invalid sensor device\n"); |
| } |
| #endif |
| |
| printf("Reset cause: %s\n", get_reset_cause()); |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(bd_t *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| #ifndef CONFIG_MX7 |
| u32 get_ahb_clk(void) |
| { |
| struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; |
| u32 reg, ahb_podf; |
| |
| reg = __raw_readl(&imx_ccm->cbcdr); |
| reg &= MXC_CCM_CBCDR_AHB_PODF_MASK; |
| ahb_podf = reg >> MXC_CCM_CBCDR_AHB_PODF_OFFSET; |
| |
| return get_periph_clk() / (ahb_podf + 1); |
| } |
| #endif |
| |
| void arch_preboot_os(void) |
| { |
| #if defined(CONFIG_PCIE_IMX) |
| imx_pcie_remove(); |
| #endif |
| #if defined(CONFIG_SATA) |
| sata_remove(0); |
| #if defined(CONFIG_MX6) |
| disable_sata_clock(); |
| #endif |
| #endif |
| #if defined(CONFIG_VIDEO_IPUV3) |
| /* disable video before launching O/S */ |
| ipuv3_fb_shutdown(); |
| #endif |
| #if defined(CONFIG_VIDEO_MXS) |
| lcdif_power_down(); |
| #endif |
| } |
| |
| void set_chipselect_size(int const cs_size) |
| { |
| unsigned int reg; |
| struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; |
| reg = readl(&iomuxc_regs->gpr[1]); |
| |
| switch (cs_size) { |
| case CS0_128: |
| reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */ |
| reg |= 0x5; |
| break; |
| case CS0_64M_CS1_64M: |
| reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */ |
| reg |= 0x1B; |
| break; |
| case CS0_64M_CS1_32M_CS2_32M: |
| reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */ |
| reg |= 0x4B; |
| break; |
| case CS0_32M_CS1_32M_CS2_32M_CS3_32M: |
| reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */ |
| reg |= 0x249; |
| break; |
| default: |
| printf("Unknown chip select size: %d\n", cs_size); |
| break; |
| } |
| |
| writel(reg, &iomuxc_regs->gpr[1]); |
| } |
| |
| #ifdef CONFIG_NXP_BOARD_REVISION |
| int nxp_board_rev(void) |
| { |
| /* |
| * Get Board ID information from OCOTP_GP1[15:8] |
| * RevA: 0x1 |
| * RevB: 0x2 |
| * RevC: 0x3 |
| */ |
| struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; |
| struct fuse_bank *bank = &ocotp->bank[4]; |
| struct fuse_bank4_regs *fuse = |
| (struct fuse_bank4_regs *)bank->fuse_regs; |
| |
| return (readl(&fuse->gp1) >> 8 & 0x0F); |
| } |
| |
| char nxp_board_rev_string(void) |
| { |
| const char *rev = "A"; |
| |
| return (*rev + nxp_board_rev() - 1); |
| } |
| #endif |