blob: a5ecfcc1d756c97896149df87ee9177004894324 [file] [log] [blame]
/*
* Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
* Copyright (C) 2017 Alexander Graf <agraf@suse.de>
*
* Based on zynq-zed.dts which is:
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2012 National Instruments Corp.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq Z-Turn MYIR Board";
compatible = "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
serial1 = &uart0;
spi0 = &qspi;
mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
led_r {
label = "led_r";
gpios = <&gpio0 0x72 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_g {
label = "led_g";
gpios = <&gpio0 0x73 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led_b {
label = "led_b";
gpios = <&gpio0 0x74 0x1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
usr_led1 {
label = "usr_led1";
gpios = <&gpio0 0x0 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
usr_led2 {
label = "usr_led2";
gpios = <&gpio0 0x9 0x1>;
default-state = "off";
linux,default-trigger = "none";
};
};
gpio-beep {
compatible = "gpio-beeper";
label = "pl-beep";
gpios = <&gpio0 0x75 0x0>;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <0x1>;
#size-cells = <0x0>;
autorepeat;
K1 {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
gpio-key,wakeup;
autorepeat;
};
};
};
&clkc {
ps-clk-frequency = <33333333>;
fclk-enable = <0xf>;
};
&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
reg = <0x0>;
};
};
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart0 {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&can0 {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
stlm75@49 {
status = "okay";
compatible = "lm75";
reg = <0x49>;
};
adxl345@53 {
compatible = "adi,adxl34x", "adxl34x";
reg = <0x53>;
interrupt-parent = <&intc>;
interrupts = <0x0 0x1e 0x4>;
};
};