| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2018 Allied Telesis Labs |
| */ |
| |
| #ifndef _CONFIG_X530_H |
| #define _CONFIG_X530_H |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| |
| #define CONFIG_DISPLAY_BOARDINFO_LATE |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK |
| #if !defined(CONFIG_DM_SERIAL) |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE |
| #endif |
| |
| /* |
| * Serial Port configuration |
| * The following definitions let you select what serial you want to use |
| * for your console driver. |
| */ |
| |
| /* NAND */ |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| |
| #define BBT_CUSTOM_SCAN |
| #define BBT_CUSTOM_SCAN_PAGE 0 |
| #define BBT_CUSTOM_SCAN_POSITION 2048 |
| |
| /* SPI NOR flash default params, used by sf commands */ |
| |
| #define MTDIDS_DEFAULT "nand0=nand" |
| #define MTDPARTS_DEFAULT "mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)" |
| #define MTDPARTS_MTDOOPS "errlog" |
| |
| /* Partition support */ |
| |
| /* Additional FS support/configuration */ |
| |
| /* USB/EHCI configuration */ |
| #define CONFIG_EHCI_IS_TDI |
| |
| /* Environment in SPI NOR flash */ |
| |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ |
| |
| /* PCIe support */ |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_PCI_SCAN_SHOW |
| #endif |
| |
| /* NAND */ |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| |
| #include <asm/arch/config.h> |
| |
| /* |
| * Other required minimal configurations |
| */ |
| #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ |
| |
| /* Keep device tree and initrd in low memory so the kernel can access them */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "fdt_high=0x10000000\0" \ |
| "initrd_high=0x10000000\0" |
| |
| #define CONFIG_UBI_PART user |
| #define CONFIG_UBIFS_VOLUME user |
| |
| /* SPL */ |
| |
| /* Defines for SPL */ |
| #define CONFIG_SPL_SIZE (140 << 10) |
| #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) |
| |
| #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) |
| #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_MALLOC_SIMPLE |
| #endif |
| |
| #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) |
| #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) |
| |
| #endif /* _CONFIG_X530_H */ |