| /* |
| * GNU General Public License for more details. |
| * |
| * MATRIX Vision GmbH / June 2002-Nov 2003 |
| * Andre Schwarz |
| */ |
| |
| #include <common.h> |
| #include <mpc824x.h> |
| #include <asm/io.h> |
| #include <ns16550.h> |
| |
| #ifdef CONFIG_PCI |
| #include <pci.h> |
| #endif |
| |
| u32 get_BoardType (void); |
| |
| #define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \ |
| | ((d&0x1f)<<11) \ |
| | ((f&0x7)<<7) \ |
| | (r&0xfc) ) |
| |
| int mv_pci_read (int bus, int dev, int func, int reg) |
| { |
| *(u32 *) (0xfec00cf8) = PCI_CONFIG (bus, dev, func, reg); |
| asm ("sync"); |
| return cpu_to_le32 (*(u32 *) (0xfee00cfc)); |
| } |
| |
| u32 get_BoardType () |
| { |
| return (mv_pci_read (0, 0xe, 0, 0) == 0x06801095 ? 0 : 1); |
| } |
| |
| void init_2nd_DUART (void) |
| { |
| NS16550_t console = (NS16550_t) CFG_NS16550_COM2; |
| int clock_divisor = CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE; |
| |
| *(u8 *) (0xfc004511) = 0x1; |
| NS16550_init (console, clock_divisor); |
| } |
| void hw_watchdog_reset (void) |
| { |
| if (get_BoardType () == 0) { |
| *(u32 *) (0xff000005) = 0; |
| asm ("sync"); |
| } |
| } |
| int checkboard (void) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| ulong busfreq = get_bus_freq (0); |
| char buf[32]; |
| u32 BoardType = get_BoardType (); |
| char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" }; |
| char *p; |
| bd_t *bd = gd->bd; |
| |
| hw_watchdog_reset (); |
| |
| printf ("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION); |
| printf (" Found %s running at %s MHz memory clock.\n", |
| BoardName[BoardType], strmhz (buf, busfreq)); |
| |
| init_2nd_DUART (); |
| |
| if ((p = getenv ("console_nr")) != NULL) { |
| unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3; |
| |
| bd->bi_baudrate &= ~3; |
| bd->bi_baudrate |= con_nr & 3; |
| } |
| return 0; |
| } |
| |
| long int initdram (int board_type) |
| { |
| long size; |
| long new_bank0_end; |
| long mear1; |
| long emear1; |
| |
| size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); |
| |
| new_bank0_end = size - 1; |
| mear1 = mpc824x_mpc107_getreg(MEAR1); |
| emear1 = mpc824x_mpc107_getreg(EMEAR1); |
| mear1 = (mear1 & 0xFFFFFF00) | |
| ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); |
| emear1 = (emear1 & 0xFFFFFF00) | |
| ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); |
| mpc824x_mpc107_setreg(MEAR1, mear1); |
| mpc824x_mpc107_setreg(EMEAR1, emear1); |
| |
| return (size); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| u8 *dhcp_vendorex_prep (u8 * e) |
| { |
| char *ptr; |
| |
| /* DHCP vendor-class-identifier = 60 */ |
| if ((ptr = getenv ("dhcp_vendor-class-identifier"))) { |
| *e++ = 60; |
| *e++ = strlen (ptr); |
| while (*ptr) |
| *e++ = *ptr++; |
| } |
| /* my DHCP_CLIENT_IDENTIFIER = 61 */ |
| if ((ptr = getenv ("dhcp_client_id"))) { |
| *e++ = 61; |
| *e++ = strlen (ptr); |
| while (*ptr) |
| *e++ = *ptr++; |
| } |
| return e; |
| } |
| |
| u8 *dhcp_vendorex_proc (u8 * popt) |
| { |
| return NULL; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Initialize PCI Devices |
| */ |
| #ifdef CONFIG_PCI |
| void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev) |
| { |
| u32 cnt; |
| |
| printf ("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV (dev), |
| PCI_FUNC (dev)); |
| for (cnt = 0; cnt < 6; cnt++) |
| pci_hose_write_config_dword (hose, dev, 0x10 + (4 * cnt), |
| 0x0); |
| printf ("done\n"); |
| } |
| |
| void duart_setup (u32 base, u16 divisor) |
| { |
| printf ("duart setup ..."); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x80); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 0), divisor & 0xff); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 1), divisor >> 8); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x03); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 4), 0x03); |
| out_8 ((u8 *) (CFG_ISA_IO + base + 2), 0x07); |
| printf ("done\n"); |
| } |
| |
| void pci_mvblue_fixup_irq_behind_bridge (struct pci_controller *hose, |
| pci_dev_t bridge, unsigned char irq) |
| { |
| pci_dev_t d; |
| unsigned char bus; |
| unsigned short vendor, class; |
| |
| pci_hose_read_config_byte (hose, bridge, PCI_SECONDARY_BUS, &bus); |
| for (d = PCI_BDF (bus, 0, 0); |
| d < PCI_BDF (bus, PCI_MAX_PCI_DEVICES - 1, |
| PCI_MAX_PCI_FUNCTIONS - 1); |
| d += PCI_BDF (0, 0, 1)) { |
| pci_hose_read_config_word (hose, d, PCI_VENDOR_ID, &vendor); |
| if (vendor != 0xffff && vendor != 0x0000) { |
| pci_hose_read_config_word (hose, d, PCI_CLASS_DEVICE, |
| &class); |
| if (class == PCI_CLASS_BRIDGE_PCI) |
| pci_mvblue_fixup_irq_behind_bridge (hose, d, |
| irq); |
| else |
| pci_hose_write_config_byte (hose, d, |
| PCI_INTERRUPT_LINE, |
| irq); |
| } |
| } |
| } |
| |
| #define MV_MAX_PCI_BUSSES 3 |
| #define SLOT0_IRQ 3 |
| #define SLOT1_IRQ 4 |
| void pci_mvblue_fixup_irq (struct pci_controller *hose, pci_dev_t dev) |
| { |
| unsigned char line = 0xff; |
| unsigned short class; |
| |
| if (PCI_BUS (dev) == 0) { |
| switch (PCI_DEV (dev)) { |
| case 0xd: |
| if (get_BoardType () == 0) { |
| line = 1; |
| } else |
| /* mvBL */ |
| line = 2; |
| break; |
| case 0xe: |
| /* mvBB: IDE */ |
| line = 2; |
| pci_hose_write_config_byte (hose, dev, 0x8a, 0x20); |
| break; |
| case 0xf: |
| /* mvBB: Slot0 (Grabber) */ |
| pci_hose_read_config_word (hose, dev, |
| PCI_CLASS_DEVICE, &class); |
| if (class == PCI_CLASS_BRIDGE_PCI) { |
| pci_mvblue_fixup_irq_behind_bridge (hose, dev, |
| SLOT0_IRQ); |
| line = 0xff; |
| } else |
| line = SLOT0_IRQ; |
| break; |
| case 0x10: |
| /* mvBB: Slot1 */ |
| pci_hose_read_config_word (hose, dev, |
| PCI_CLASS_DEVICE, &class); |
| if (class == PCI_CLASS_BRIDGE_PCI) { |
| pci_mvblue_fixup_irq_behind_bridge (hose, dev, |
| SLOT1_IRQ); |
| line = 0xff; |
| } else |
| line = SLOT1_IRQ; |
| break; |
| default: |
| printf ("***pci_scan: illegal dev = 0x%08x\n", |
| PCI_DEV (dev)); |
| line = 0xff; |
| break; |
| } |
| pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, |
| line); |
| } |
| } |
| |
| struct pci_controller hose = { |
| fixup_irq:pci_mvblue_fixup_irq |
| }; |
| |
| void pci_init_board (void) |
| { |
| pci_mpc824x_init (&hose); |
| } |
| #endif |