| /* |
| * (C) Copyright 2010,2011 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/funcmux.h> |
| #include <asm/arch/tegra.h> |
| #include <asm/arch-tegra/board.h> |
| #include <asm/arch-tegra/pmc.h> |
| #include <asm/arch-tegra/sys_proto.h> |
| #include <asm/arch-tegra/warmboot.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| enum { |
| /* UARTs which we can enable */ |
| UARTA = 1 << 0, |
| UARTB = 1 << 1, |
| UARTD = 1 << 3, |
| UART_COUNT = 4, |
| }; |
| |
| /* |
| * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0, |
| * so we are using this value to identify memory size. |
| */ |
| |
| unsigned int query_sdram_size(void) |
| { |
| struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; |
| u32 reg; |
| |
| reg = readl(&pmc->pmc_scratch20); |
| debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg); |
| |
| #if defined(CONFIG_TEGRA20) |
| /* bits 30:28 in OdmData are used for RAM size on T20 */ |
| reg &= 0x70000000; |
| |
| switch ((reg) >> 28) { |
| case 1: |
| return 0x10000000; /* 256 MB */ |
| case 0: |
| case 2: |
| default: |
| return 0x20000000; /* 512 MB */ |
| case 3: |
| return 0x40000000; /* 1GB */ |
| } |
| #else /* Tegra30 */ |
| /* bits 31:28 in OdmData are used for RAM size on T30 */ |
| switch ((reg) >> 28) { |
| case 0: |
| case 1: |
| default: |
| return 0x10000000; /* 256 MB */ |
| case 2: |
| return 0x20000000; /* 512 MB */ |
| case 3: |
| return 0x30000000; /* 768 MB */ |
| case 4: |
| return 0x40000000; /* 1GB */ |
| case 8: |
| return 0x7ff00000; /* 2GB - 1MB */ |
| } |
| #endif |
| } |
| |
| int dram_init(void) |
| { |
| /* We do not initialise DRAM here. We just query the size */ |
| gd->ram_size = query_sdram_size(); |
| return 0; |
| } |
| |
| #ifdef CONFIG_DISPLAY_BOARDINFO |
| int checkboard(void) |
| { |
| printf("Board: %s\n", sysinfo.board_string); |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_BOARDINFO */ |
| |
| static int uart_configs[] = { |
| #if defined(CONFIG_TEGRA20) |
| #if defined(CONFIG_TEGRA_UARTA_UAA_UAB) |
| FUNCMUX_UART1_UAA_UAB, |
| #elif defined(CONFIG_TEGRA_UARTA_GPU) |
| FUNCMUX_UART1_GPU, |
| #elif defined(CONFIG_TEGRA_UARTA_SDIO1) |
| FUNCMUX_UART1_SDIO1, |
| #else |
| FUNCMUX_UART1_IRRX_IRTX, |
| #endif |
| FUNCMUX_UART2_UAD, |
| -1, |
| FUNCMUX_UART4_GMC, |
| -1, |
| #else /* Tegra30 */ |
| FUNCMUX_UART1_ULPI, /* UARTA */ |
| -1, |
| -1, |
| -1, |
| -1, |
| #endif |
| }; |
| |
| /** |
| * Set up the specified uarts |
| * |
| * @param uarts_ids Mask containing UARTs to init (UARTx) |
| */ |
| static void setup_uarts(int uart_ids) |
| { |
| static enum periph_id id_for_uart[] = { |
| PERIPH_ID_UART1, |
| PERIPH_ID_UART2, |
| PERIPH_ID_UART3, |
| PERIPH_ID_UART4, |
| }; |
| size_t i; |
| |
| for (i = 0; i < UART_COUNT; i++) { |
| if (uart_ids & (1 << i)) { |
| enum periph_id id = id_for_uart[i]; |
| |
| funcmux_select(id, uart_configs[i]); |
| clock_ll_start_uart(id); |
| } |
| } |
| } |
| |
| void board_init_uart_f(void) |
| { |
| int uart_ids = 0; /* bit mask of which UART ids to enable */ |
| |
| #ifdef CONFIG_TEGRA_ENABLE_UARTA |
| uart_ids |= UARTA; |
| #endif |
| #ifdef CONFIG_TEGRA_ENABLE_UARTB |
| uart_ids |= UARTB; |
| #endif |
| #ifdef CONFIG_TEGRA_ENABLE_UARTD |
| uart_ids |= UARTD; |
| #endif |
| setup_uarts(uart_ids); |
| } |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| void enable_caches(void) |
| { |
| /* Enable D-cache. I-cache is already enabled in start.S */ |
| dcache_enable(); |
| } |
| #endif |