| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Qualcomm SDHCI driver - SD/eMMC controller |
| * |
| * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> |
| * |
| * Based on Linux driver |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <malloc.h> |
| #include <sdhci.h> |
| #include <wait_bit.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| |
| /* Non-standard registers needed for SDHCI startup */ |
| #define SDCC_MCI_POWER 0x0 |
| #define SDCC_MCI_POWER_SW_RST BIT(7) |
| |
| /* This is undocumented register */ |
| #define SDCC_MCI_VERSION 0x50 |
| #define SDCC_MCI_VERSION_MAJOR_SHIFT 28 |
| #define SDCC_MCI_VERSION_MAJOR_MASK (0xf << SDCC_MCI_VERSION_MAJOR_SHIFT) |
| #define SDCC_MCI_VERSION_MINOR_MASK 0xff |
| |
| #define SDCC_MCI_STATUS2 0x6C |
| #define SDCC_MCI_STATUS2_MCI_ACT 0x1 |
| #define SDCC_MCI_HC_MODE 0x78 |
| |
| /* Offset to SDHCI registers */ |
| #define SDCC_SDHCI_OFFSET 0x900 |
| |
| /* Non standard (?) SDHCI register */ |
| #define SDHCI_VENDOR_SPEC_CAPABILITIES0 0x11c |
| |
| struct msm_sdhc_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct msm_sdhc { |
| struct sdhci_host host; |
| void *base; |
| }; |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int msm_sdc_clk_init(struct udevice *dev) |
| { |
| int node = dev_of_offset(dev); |
| uint clk_rate = fdtdec_get_uint(gd->fdt_blob, node, "clock-frequency", |
| 400000); |
| uint clkd[2]; /* clk_id and clk_no */ |
| int clk_offset; |
| struct udevice *clk_dev; |
| struct clk clk; |
| int ret; |
| |
| ret = fdtdec_get_int_array(gd->fdt_blob, node, "clock", clkd, 2); |
| if (ret) |
| return ret; |
| |
| clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]); |
| if (clk_offset < 0) |
| return clk_offset; |
| |
| ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev); |
| if (ret) |
| return ret; |
| |
| clk.id = clkd[1]; |
| ret = clk_request(clk_dev, &clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_set_rate(&clk, clk_rate); |
| clk_free(&clk); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int msm_sdc_probe(struct udevice *dev) |
| { |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| struct msm_sdhc_plat *plat = dev_get_plat(dev); |
| struct msm_sdhc *prv = dev_get_priv(dev); |
| struct sdhci_host *host = &prv->host; |
| u32 core_version, core_minor, core_major; |
| u32 caps; |
| int ret; |
| |
| host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B; |
| |
| host->max_clk = 0; |
| |
| /* Init clocks */ |
| ret = msm_sdc_clk_init(dev); |
| if (ret) |
| return ret; |
| |
| /* Reset the core and Enable SDHC mode */ |
| writel(readl(prv->base + SDCC_MCI_POWER) | SDCC_MCI_POWER_SW_RST, |
| prv->base + SDCC_MCI_POWER); |
| |
| |
| /* Wait for reset to be written to register */ |
| if (wait_for_bit_le32(prv->base + SDCC_MCI_STATUS2, |
| SDCC_MCI_STATUS2_MCI_ACT, false, 10, false)) { |
| printf("msm_sdhci: reset request failed\n"); |
| return -EIO; |
| } |
| |
| /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */ |
| if (wait_for_bit_le32(prv->base + SDCC_MCI_POWER, |
| SDCC_MCI_POWER_SW_RST, false, 2, false)) { |
| printf("msm_sdhci: stuck in reset\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* Enable host-controller mode */ |
| writel(1, prv->base + SDCC_MCI_HC_MODE); |
| |
| core_version = readl(prv->base + SDCC_MCI_VERSION); |
| |
| core_major = (core_version & SDCC_MCI_VERSION_MAJOR_MASK); |
| core_major >>= SDCC_MCI_VERSION_MAJOR_SHIFT; |
| |
| core_minor = core_version & SDCC_MCI_VERSION_MINOR_MASK; |
| |
| /* |
| * Support for some capabilities is not advertised by newer |
| * controller versions and must be explicitly enabled. |
| */ |
| if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) { |
| caps = readl(host->ioaddr + SDHCI_CAPABILITIES); |
| caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT; |
| writel(caps, host->ioaddr + SDHCI_VENDOR_SPEC_CAPABILITIES0); |
| } |
| |
| ret = mmc_of_parse(dev, &plat->cfg); |
| if (ret) |
| return ret; |
| |
| host->mmc = &plat->mmc; |
| host->mmc->dev = dev; |
| ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0); |
| if (ret) |
| return ret; |
| host->mmc->priv = &prv->host; |
| upriv->mmc = host->mmc; |
| |
| return sdhci_probe(dev); |
| } |
| |
| static int msm_sdc_remove(struct udevice *dev) |
| { |
| struct msm_sdhc *priv = dev_get_priv(dev); |
| |
| /* Disable host-controller mode */ |
| writel(0, priv->base + SDCC_MCI_HC_MODE); |
| |
| return 0; |
| } |
| |
| static int msm_of_to_plat(struct udevice *dev) |
| { |
| struct udevice *parent = dev->parent; |
| struct msm_sdhc *priv = dev_get_priv(dev); |
| struct sdhci_host *host = &priv->host; |
| int node = dev_of_offset(dev); |
| |
| host->name = strdup(dev->name); |
| host->ioaddr = dev_read_addr_ptr(dev); |
| host->bus_width = fdtdec_get_int(gd->fdt_blob, node, "bus-width", 4); |
| host->index = fdtdec_get_uint(gd->fdt_blob, node, "index", 0); |
| priv->base = (void *)fdtdec_get_addr_size_auto_parent(gd->fdt_blob, |
| dev_of_offset(parent), node, "reg", 1, NULL, false); |
| if (priv->base == (void *)FDT_ADDR_T_NONE || |
| host->ioaddr == (void *)FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int msm_sdc_bind(struct udevice *dev) |
| { |
| struct msm_sdhc_plat *plat = dev_get_plat(dev); |
| |
| return sdhci_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static const struct udevice_id msm_mmc_ids[] = { |
| { .compatible = "qcom,sdhci-msm-v4" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(msm_sdc_drv) = { |
| .name = "msm_sdc", |
| .id = UCLASS_MMC, |
| .of_match = msm_mmc_ids, |
| .of_to_plat = msm_of_to_plat, |
| .ops = &sdhci_ops, |
| .bind = msm_sdc_bind, |
| .probe = msm_sdc_probe, |
| .remove = msm_sdc_remove, |
| .priv_auto = sizeof(struct msm_sdhc), |
| .plat_auto = sizeof(struct msm_sdhc_plat), |
| }; |